We are very much interested in buying TG sets along with the following accessories: a). Turbine (preferably speed 3000 RPM) b). Inlet steam pressure (40kg / sq cm) c). Gauge Steam temperature 425 degree celcius (+/- 10)jd d). Exhaust pressure fully condensing (29.5 each of Hg vaccum) e). Condesor suitable for sea water f). Condensor must have facility of online cleaning g). Condensor vaccum system should be vaccum pumped operated or system ejector complete with condensing unit h). Turbine should have one main oil pump (turbine shaft driven pump) i). Steam driven oil pump j). PC battery oil pump.
Wind power generator, vertiacal-axis wind turbine, hawt.......
Rated power:0.05kw, rated voltage:14v, rated current:3.57a, rated rotated speed:500rpm, startup torque:0.25n*m, efficiency:>70% Case
Made of stainless steel, 36 fins, dia 28", hieght-18", frp base made of gp resin &450 gsm fiber glass. 25 pcs.
Model : H2.7 - 500 Rotor Blade Dia :2.7 m Start up Wind Speed :2.5 m /s rated Wind Speed :7 m/s Rated Output :500w Battery Req :2 x 12v O/p Voltage :AC220V DC 28V Height :6m Generator Wt:6.5kg Special Features : ä½ Light Weight, Small & High Efficiency ä½ Reasonable Price ä½ Environment friendly ä½ No Maintenance & Servicing cost ä½ Returns lasting for many years ä½ Personal Service
Worldwide approaved by all the major gas turbine manufacturers 20/200/1000 lts.
Wind turbine Our company China tech group , holds brand of ct turbine. We produce and develop horisonal and vertical wind turbine generation. Horisonal wind turbine: 200w~50kw Vertical wind turbine: 200w~ 5kw We have worked out many modern types of blades for vawt. Our products can be used for home, industry, public engineering, etc.
Main Parameter: Model: TR10.0-20KW Rated Power: 20KW Max Power: 25KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 360V Start Wind Speed: 2m/s Rated Wind Speed: 12m/s Maximum Wind Speed: 45m/s Rotor Diameter: 10.0m Rated Rotor Speed: 90r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 18m or higher
Main Parameter: Model: TR8.0-10KW Rated Power: 10KW Max Power: 12KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 8.0m Rated Rotor Speed: 180r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR6.4-5000W Rated Power: 5000W Max Power: 6000W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 6.4m Rated Rotor Speed: 200r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR3.2-1000W Rated Power: 1000W Max Power: 1500W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 48V Start Wind Speed: 2m/s Rated Wind Speed: 8m/s Maximum Wind Speed: 35m/s Rotor Diameter: 3.2m Rated Rotor Speed: 400r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 6m ,9m or 12m
The characters and the advantages of íºTongguaní¿ no power ventilation 1. The theory of its running Our no power ventilations needs not the electric power instead of easily driving the turbine vanes to ratite by nature breeze or the temperature difference between indoor and outdoor so as to make true the running without cost. They are the real practical and energy-saving products without noise and pollution so they can save much electric power and labors for users in order to lower the production cost clearly, to improve the working surrounding of the workshop, to rise the working efficiency and even to strengthen the quality of their products. 2. The constitutes of the material Our no power ventilations are made of the whole stainless steel which needs no maintenance longer, are anti-acid and anti-erosion by the only once investment. The íºTongguaní¿ no power ventilations are set up the advanced bearings imported from America which can be assured for about 15 years. 3. The values of the no power ventilations A. They can exhausted the hot air, waste gas, dust and other harmful gas; meanwhile, the fresh air outdoor can come into the workshop so as to better the working surrounding, to make the workers more energetic and to increase the benefits of the company. B. Lower the usersíª production costs. Because our no power ventilations belongs to the products which need no electric power and other consumes for the life-long time after the only once investment. To a large extent, they can lower the usersíª products costing. C. Enhance the concept of their safety in workshop. First of all, if there is no much harmful gas in workshop, the air can ventilate normally so that they needníªt to worry about the dangerous accidents caused by bombing or mistakenly using the electric power. Secondly, in case there happens the fire in workshop, our No power ventilators on the roof can make the smoke indoor flow out more quickly, which at the same time can bring out more time for the victims to escape and reduce the loss by the accident. D. They can demonstrate the strength and the humanization management of the enterprise, enhance the "people oriented" principle of the modern enterprises and make a show of the timeíªs colorful image. E. Beautify our living and working surrounding. These no power ventilators are possessed with an attractive appearance, so they can play their part in beautifying the surrounding. Production Description The Raw Material of TG Turbine Ventilations: ó¦) TG Turbine Ventilations are made of the stainless steel. ó¦) We use the advanced UBC bearings from USA. The Operating Theory of TG Turbine Ventilation: â_ The undulating vanes lead to smooth rotation at light wind. The bearings at lower and upper position make smooth turns. â_ The motility created by the rotation of the vanes brings the hot air, smoke and wet air up to the roof and exhausts them out. â_ Because the turbine is went on rotating, the fresh air outdoor can enter into the room continually so that the room can ventilate conveniently. â_ The single rotating mechanism will work normally except there is the severe natural damage during 15 years. They are widely used in chemical industry, light industry, food, medicine, textile and dye, metallurgy, electrical power, construction, tunnel, machine and hotel, cinema and marketplace. Recent years later, our products are of demand exceeding supply, and we have our customers through all parts of the country and some foreign countries. Accoring to different types
Prophy-Mate is a kind of dental descaler equipment which is use synthetically with complex treatment method in dental surgery. It is connected to the joint of high speed manual machine of complex treatment unit, the air souse (0.3Mpa-0.4MPa) and water source (0.2MPa-0.4MPa) on complex treatment unit will control air pressure and water pressure of Prophy-Mate. The operating principle of Prophy-Mate is as follows: The sand blasting powder in case would spurt out from nozzle via pipeline by compressing the air into case. At the time of powder spurting out, it mixes with water spurting out from mouth of Prophy-Mate to form into a foggy mixture. And this mixture would spray on the surface of teeth. Design features 1. The appearance is handsome and dexterous and the structure is indiscrete 2. Directly connecting to complex treatment unit, so it is very handy 3. It is easy to replace the working head of Prophy-Mate. And it can be sterilized in condition of vacuum with temperature of 121 4 Anti-resorption facility in sand blasting gun can prevent sand blasting powder to be back-adsorbed into complex treatment unit. Technical parameters 1. Prophy-mate can be divided into two types according to connection mode: Connector (two holes) and connector (four holes) 2. Water pressureo0.2Mpa-0.44MPa 3. Air pressure of 0.3Mpa-0.4MPa 4. Water spraying amount of working head 30ml/min 5. Sand blasting amount of working head 2.4g-3.2g/min.
Wind turbines
Steam turbine
Gas and biomass turbines
Turbine ventilation The electricity cost of 1 electricity ventilators of 1 kw for running 3 months=1 turbine roof ventilation We have three types of our products, tg-880, tg-600.Tg-500.Tg-300
The towers are formulated to house a variety of accessories which include platforms, ladder ear, step bolts, safety cage and so on. Our latticed tower can be used in these fields such as electric power transmission line tower, telecommunication tower, broadcasting tower, watching tower, microwave tower, mapping tower, communication tower, crossing-river tower and other applications. Model No: 4 Legged Angular Tower(3 Legged Angular Tower or Based on the customerí»s requirements.) Material: All the steel are used the noted Chinese steel plant products or based on the customers specific requirements or product them according to our Chinese national standard. Capacity: 60,000tons/year HS Code: 73081000 Payment Term:T/T; L/C Port of Loading:Qingdao Port
It is the large diameter & thick steel pipe structure below the generator of a wind turbine that supports the turbine, houses the meters and wires, and keeps the turbine high above the ground level to protect the surrounding area and people from the force of the blades. It is also the main stressed components which need to be enough strength and rigidity to endure huge wind pressure and shearing forces. The base also serves to elevate the turbine above surrounding obstacles that could otherwise block the wind. The tower units are formulated to a large tube with a variety of accessories which include platforms, ladders, cable fixings, positioning of switchboard and so on. Our Wuxiao Group manufactures them with high quality materials and sophisticated technology.
Numbers of blade(P): 3 Materials of blade: FRP complex resin Diameter of wind turbines(m): 8.0 Startup wind speed: 3 Rated wind speed(m/s): 10 Working wind speed (m/s): 3-25 Max. wind speed(m/s): 45 Rated speed(rotate/minute): 220 Wind energy ratio(%): 0.42 Generator: Permanent magnetic generator Generator rated power(W): 10000 Max.output power(W): 12000 Output voltage(V): 240vDC/360vDC Rated current(A): 25.3 Timing manner: Automatically adjust the windward angle Over speed Protection: AutoFurl Temperature Range: -40 ~ +60 Deg.C Tower: Guy wire type/ Free standing type Altitude of tower(m): 12/11.5 Charging control: Automatic Weight (kg): 1200 Power generation of years(kwh): 50000 Inverter power supply: Square wave Time of charging(h): 20 Battery: 12v200AH X40pcs Generator: 133*106*141cm Blade:402*33*52cm Tower: (400*38*38cm)*3 Inverter:74*47*65cm Controller: 70*60*91cm False ogive:88*85*64cm Accessories: 106*54*47cm
