Air Turbine Handpiece

The air vent turbine ventilator operates by utilizing the velocity energy of the wind to induce airflow by centrifugal action. The centrifugal force caused by the spinning vanes creates a region of low-pressure area, which draws air out through the air vent turbine ventilator. Air drawn out by the ATCO air vent turbine ventilator is continuously replaces by fresh air from the outside. The slightest breeze will cause the ATCO air vent turbine ventilator to spin and even after the breeze has stopped, the flywheel effect of the rotor cage will use its stored energy to continuously remove air giving rise to ventilation. Suction is maintained even at low wind velocities.

GT Type Air Pneumatic Turbine Vibrator For Hopper Products Features Vibration intensity can be adjustable based on air pressure, can immediately start, stop, fast, low-noise, vibration force, security. Application Feed material conveyor, vibrating screening, vibrating hopper, to help fill packing, foundry sand mold vibration. Works Copper eccentric gear installed counterweight impact air intake charge into the gear rotates, the eccentric rotation of the centrifugal weight with vibration, the gear driven by a bearing, low noise.

blower inlet casing Material: HT250 Weight:13.65kg Process:sand casting Description: The cast iron pump body which formation of turbulent flow

The characters and the advantages of íºTongguaní¿ no power ventilation 1. The theory of its running Our no power ventilations needs not the electric power instead of easily driving the turbine vanes to ratite by nature breeze or the temperature difference between indoor and outdoor so as to make true the running without cost. They are the real practical and energy-saving products without noise and pollution so they can save much electric power and labors for users in order to lower the production cost clearly, to improve the working surrounding of the workshop, to rise the working efficiency and even to strengthen the quality of their products. 2. The constitutes of the material Our no power ventilations are made of the whole stainless steel which needs no maintenance longer, are anti-acid and anti-erosion by the only once investment. The íºTongguaní¿ no power ventilations are set up the advanced bearings imported from America which can be assured for about 15 years. 3. The values of the no power ventilations A. They can exhausted the hot air, waste gas, dust and other harmful gas; meanwhile, the fresh air outdoor can come into the workshop so as to better the working surrounding, to make the workers more energetic and to increase the benefits of the company. B. Lower the usersíª production costs. Because our no power ventilations belongs to the products which need no electric power and other consumes for the life-long time after the only once investment. To a large extent, they can lower the usersíª products costing. C. Enhance the concept of their safety in workshop. First of all, if there is no much harmful gas in workshop, the air can ventilate normally so that they needníªt to worry about the dangerous accidents caused by bombing or mistakenly using the electric power. Secondly, in case there happens the fire in workshop, our No power ventilators on the roof can make the smoke indoor flow out more quickly, which at the same time can bring out more time for the victims to escape and reduce the loss by the accident. D. They can demonstrate the strength and the humanization management of the enterprise, enhance the "people oriented" principle of the modern enterprises and make a show of the timeíªs colorful image. E. Beautify our living and working surrounding. These no power ventilators are possessed with an attractive appearance, so they can play their part in beautifying the surrounding. Production Description The Raw Material of TG Turbine Ventilations: ó¦) TG Turbine Ventilations are made of the stainless steel. ó¦) We use the advanced UBC bearings from USA. The Operating Theory of TG Turbine Ventilation: â_ The undulating vanes lead to smooth rotation at light wind. The bearings at lower and upper position make smooth turns. â_ The motility created by the rotation of the vanes brings the hot air, smoke and wet air up to the roof and exhausts them out. â_ Because the turbine is went on rotating, the fresh air outdoor can enter into the room continually so that the room can ventilate conveniently. â_ The single rotating mechanism will work normally except there is the severe natural damage during 15 years. They are widely used in chemical industry, light industry, food, medicine, textile and dye, metallurgy, electrical power, construction, tunnel, machine and hotel, cinema and marketplace. Recent years later, our products are of demand exceeding supply, and we have our customers through all parts of the country and some foreign countries. Accoring to different types

he CMM-G unit is designed for a three-stage process of changing oil in wind turbine gearboxes (draining old oil, flushing the gearbox and filling it with new oil). The unit allows for quick and efficient servicing of wind turbine oil system. The unit can be used for servicing wind turbines made by many different manufacturers. The CMM-G can also heat clean oil.

FD8.0-10KW Technical Parameter: Power : 10KW Blade Diameter: 8.0m Rated Rotor Speed: 160r/min Rated Speed: 10m/s Rated Power: 10KW Max Power: 14kw Output Voltage: 380v Start Up Wind Speed: 3(m/s) Work Speed: 3-20(m/s) Security Wind Speed: 40(m/s) Working Temperature : -40--+40 Height of Guy Cable Tower: 12m Generator Style: 3-phase AC PM Output Controller System: Controller , Inverter Suggested Batteries and its Capacity: 30pcs 12v 200AH. Can Supply Power for: Small Village,Air-Condition, Refrigerator, Washing Machine,Water Pump, Electric Pan, Color TV, Lighter, Fanner, Charger. Controller & inverter: Model: WWS100A-220 Rated Wind Turbine Power: 10kW Rated Solar Power: 3kW Rated Battery Voltage: 220V Wind Turbine Maximum Input Current: 90A Wind Turbine Maximum Input Power: 20KW Unload Voltage factory default : 252 V Unload Current factory default : 40A Control Mode: PWM Display Mode: LCD Display Parameters: Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current , PV Voltage, PV Charge Current, PV Power, Battery Voltage Working Temperature &Humidity: -20~+50 /35~85%RH Without Condensation Temperature Compensation optional : 4mV/ /2V , 35 --+80 , Precision 1 Communication Mode optional : RS232, RS485, RJ45, GPRS. Etc Protection Function: Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection ,Battery reverse connection protection, Lightning protection, Wind turbine current limiting, Wind turbine automatic brake and manual brake. Model: WI100-220-S Rated Output Capacity : 10kVA Rated Battery Voltage : 216VDC Over Voltage Shutoff: 306VDC Over Voltage Recovery: 297VDC Under Voltage Shutoff: 189VDC Under Voltage Recovery: 216VDC No Load Loss: 0.55A Output Wave Form: Pure Sine Wave Display Mode: LCD Display parameters: Battery Voltage, Output Voltage, Status parameters Cooling Mode: Fan Rated Output Voltage: 110/120/220/230/240VAC Wave Distortion: 4 Output Frequency: 50/60 Hz0.05Hz Dynamic Response: 5% Overload Capacity: 120% 1min,150% 10s Inverter Efficiency: Maximum 90% Noise 1m : 40dB Insulating Strength: 1500VAC,1min Protection Function: Battery over voltage protection, Battery under voltage protection, Battery reverse connection protection, Output overload protection, Output short circuit protection, Overheating protection. Working Ambient Temperature: -20¡«50 Working Altitude: 4000m Working Ambient Humidity: 0~90%, no condensing. in plywood.

FD5.0-3KW Technical Parameter Power : 3KW Blade Diameter: 5.0m Rated Rotor Speed: 220r/min Rated Speed: 10m/s Rated Power: 3KW Max Power: 4kw Output Voltage: 216v Start Up Wind Speed: 3(m/s) Work Speed: 3-20(m/s) Security Wind Speed: 40(m/s) Working Temperature : -40--+40 Height of Guy Cable Tower: 8m Top Quality Except Tower: 100kg Generator Style: 3-phase AC PM Output Controller System: Controller , Inverter Suggested Batteries and its Capacity: 18PCS 12V100AH. Can Supply Power for: Air-Condition, Refrigerator, Washing Machine,Water Pump ,Electric Pan, Color TV, Lighter, Fanner, Charger CONTROLLER & INVERTER: Model: WWS30A-220 Rated Wind Turbine Power: 3kW Rated Solar Power: 900W Rated Battery Voltage: 220V Wind Turbine Maximum Input Current: 25 A Wind Turbine Maximum Input Power: 6kW Unload Voltage factory default: 252 V Unload Current factory default: 25A Control Mode: PWM Display Mode: LCD Display Parameters: Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current, PV Voltage, PV Charge Current, PV Power, Battery Voltage Working Temperature & Humidity: -20~+50 /35~85%RH Without Condensation Temperature Compensation optional: 4mV/ /2V ,¨C35 --+80 , Precision£º¡À1 Communication Mode optional: RS232, RS485, RJ45, GPRS. Etc Protection Function: Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection ,Battery reverse connection protection, Lightning protection, Wind turbine current limiting, Wind turbine automatic brake and manual brake. Model: WI30-220-S Rated Output Capacity : 3kVA Rated Battery Voltage : 216VDC Over Voltage Shutoff: 306VDC Over Voltage Recovery: 297VDC Under Voltage Shutoff: 189VDC Under Voltage Recovery: 216VDC No Load Loss: 0.09A Output Wave Form: Pure Sine Wave Display Mode: LCD Display Parameters: Battery Voltage, Output Voltage, Status parameters Cooling Mode: Fan Rated Output Voltage: 110/120/220/230/240VAC Wave Distortion: 4 Output Frequency: 50/60 Hz¡À0.05Hz Dynamic Response: 5% Overload Capacity: 120% 1min,150% 10s Inverter Efficiency: Maxmum90% Noise 1m: 40dB Insulating Strength: 1500VAC, 1min Protection Function: Battery over voltage protection, Battery under voltage protection, Battery reverse connection protection, Output overload protection, Output short circuit protection, Overheating protection. Working Ambient Temperature: -20¡«50 Working Altitude: 4000m Working Ambient Humidity: 0~90%, no condensing. In plywood.

Green energy---5kw wind turbine Model number: fd6.0 íºc 5kw Rotor blade diameter: 6.0m Number of blades: 3pcs Materials of blade: glass fiber Rated rotation speed: 200(r/m) Type of generator: permanent-magnet 3 phase ac Rated power: 5000w Max power: 7000w Output voltage: 220v Cut-in wind velocity: 3(m/s) Rated wind velocity: 10(m/s) Working wind velocity: 3-30(m/s) Survival wind velocity: 50(m/s) Monopole tower height: 8m Output controlling system: electrified controller & inverter Recommended batteries: 12v100ah, 18 pieces Can load: light, fan, charger, tv, pump, washer, refrigerator, electric cooker and air conditioner Authentication: ce and iso certificate Iso, ce, tuv

Model Fzy1kw, Rotor diameter: 2.8m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 360r/min, Rated output power: 1kw, Max output power: 1500w, Output voltage: dc24v 48v/ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 2500kwh, Recommended accumulators: 12v150ah4pcs( 600ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 45kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box