Agasthya 2017 Series Portable Flue Gas Analyzer BI 100 (O2) Sensor Technology Electrochemical (EC) Measurement Gas O2 0-30% scalable Response Time (T-90) 30 seconds Display Keypad LCD Display Power 80-230 VAC, 50 Hz, Adaptor Battery Lithium-ion rechargeable batteries Communication USB Data Storage Up to 150 set of data Enclosure Handheld Operating Temperature 4 to 50C Dimension 215 (L) x 120 (B) x 40 (H) mm Area Classification General Purpose Sampling Probe available as per temp max upto 1400 degC Probe length : Customised 32-Bit Cortex-M3 ARM Processor Automatic zeroing when the analyzer is switched ON Robust/Rugged design that is easy to operate and maintain Fast warm-up and response Rechargeable battery operation Built in sample pump, filter and flowmeter Condensate removal Stainless steel probe with sample hose Battery lifetime up to 8 hours 150 set of data storage USB for Charging & Data communication Powerful windows software for Analyzer data communication
Leak Tester is used for the seal integrity checking of packages, containers, bags, pipes that are used in food, beverage, pharmaceutical, daily chemical, cosmetic and electronic industries, etc Leak Tester complies with ASTM D3078 and GB/T 15171 standards and could be modified to ASTM F 2054 Bubble Test.
Issues in CAD handling and Design - Trust Citiuskbe Tool Kit, we will handover and deliver, we are with you in the productivity journey.
1. clean oil stains on fabric without leaving any traces; 2. safely used on wool, knitted fabric, cotton fabric, silk and synthetic fiber 3. Improve work efficency and productivity 4. no harm to environment and workers
Specifications PRF 10 Hz to 2000 Hz in 10 Hz increments Pulse Width Adjustable from 25 ns to 5,000 ns (0.1 MHz) with PerfectSquare technology Gain 0 to 110 dB Receiver Bandwidth 0.2 MHz to 26.5 MHz at â??3 dB System Linearity Horizontal: �± 0.5% FSW Resolution 0.25% FSH, amplifier accuracy �± 1dB Reject 0 to 80% FSH with Visual Warning Amplitude Measurement 0 to 110% full screen height with 0.25% resolution Automated Calibration Velocity, Zero Offset Straight Beam (First Backwall or Echo-to-Echo) Angle Beam (Soundpath or Depth) Test Modes Pulse Echo, Dual, or Through Transmission Range 3.36 mm to 13,388 mm (0.132 in. to 527.10 in.) at 5,900 m/s (0.2320 in./�µs) Velocity 635 m/s to 15240 m/s (0.0250 in./�µs to 0.6000 in./�µs) Zero Offset 0 to 750 �µs Refracted Angle 0�° to 90�° in 0.1�° increments Measurement Gates 2 fully independent gates for amplitude and TOF measurements Measurements Gate (1, 2) Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude Echo-to-Echo Standard Gate 2-Gate 1, Optional IF Gate Tracking Other measurements Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 A, B, C and D values, Reject Value, Echo to RefdB values DAC/TCG Standard DAC points Up to 50 points, 110 dB dynamic range Special DAC modes Custom DAC (up to 6 curves), 20-80% View Curved surface correction Standard OD or Bar correction for Angle Beam measurements
Includes: - Olympus NORTEC 600D Dual Frequency - Calibration certificate - Charger/adaptor - AC power cord - Getting Started leaflet - NORTEC 600D Users Manual and PC interface program on CD-ROM - Universal PowerLink eddy current probe cable - MicroSD memory card, 2 GB (1 internal, 1 external) - USB 2.0 (mini-AB) to PC cable - 67 watt-hour battery for 600 Series products, 10.8 V, 6.2 Ah, 67 Wh - AA battery holder for emergency use - Factory-installed hand strap on left side of NORTEC 600D instrument - Instrument transport case - Olympus NEC-8196L Weld Inspection Kit
Fabric Innerduct Features 1.Light construction The textile sub-tube has no bending memory; it does not curl like a PE sub-tube; The textile sub-tube will not be kinked during laying and can be bent freely during laying; The textile sub-tube is preset with high-strength draw tape in each hole, and the laying of the cable does not need to be through-hole, and the laying is more convenient and quick; The construction site requirements are very small, especially suitable for busy districts. 2.Protection cable and outer tube The breaking strength is above 1000 kg; Textile tube melting point = 215 C, while HDPE sub-tube = 110 C; The thermal expansion and contraction rate of the textile tube is 1/7 of that of the HDPE sub-tube;Prevents wear between cables. 3.long lasting The textile sub-tube has high chemical inertness and can be exposed to a harsh underground environment for a long time. The design life is 30-50 years, and the life of the PE sub-tube is only 15 years. 4.Resolution recognition design Two holes in the textile sub-tube product family, three holes will be preset with different colors of the draw tape for the differentiation during construction; The textile sub-tube will print the meter mark when it leaves the factory to prevent unnecessary waste during construction; When the textile sub-tube is delivered from the factory, it will be labeled according to the customer's needs, such as A, B, C A1, A2, A3, etc., used to distinguish the multiple textile sub-tubes in the pipeline, to facilitate the maintenance of the line. 5.Environmentally friendly design concept The textile sub-tube can reach 30-50 years underground. Ordinary HDPE sub-tubes will form slag due to aging in the ground for a long time, and become a blockage in the pipeline. The textile sub-tube solves this problem from the design concept and has high environmental protection for the pipeline. Application Our fabric innerduct has been successfully installed in a variety of applications including:Broadband, Telecommute, Military, Data Centers, Wireless back-haul, Power/Utilities, Municipalities, Government, University, Healthcare, Airport and� Corporate Campuses. Fabric Innerduct maximizes the pipeline's network infrastructure while addressing conduit cabling issues, allowing for a variety of cable sizes, reducing or eliminating the number of conduits required in new structures, when overwriting existing cables or traditional internal piping Easily create paths while reducing material and labor costs and increasing installation speed.
Fabric Innerduct is the only flexible fabric innerduct system designed specifically for the network construction industry. The unique fabric construction greatly reducing the wasted space associated with rigid innerduct. Inflatable type culvert sealing system, which have been widely used in the design of underground culvert constructions in the industries of electric system, telecommunications, port, urban construction, rail transportation and so on. Provide a clean and dry operating environment to cables and other electrical equipment after installation,improve the degree of protection, and reduce the works of cleaning up sludge and stagnant water in the manual well before the maintenance works. FEATURES Fast and easy to install, even in congested enclosures. Very flexible and reliable wraparound sealing system. Independent of duct or cable ovality. Wide application cable range with one size. Seals vacant ducts and ducts with one or more cables. Can be installed while water is flowing out of the duct. Water and airtight up to 50 kPa. Environmentaly friendly and non-toxic. Resistant to chemicals and bacteria. Easy and fast removal. Different sizes are available, sealing a wide variety of ducts and cables. Application Our fabric innerduct has been successfully installed in a variety of applications including: Broadband, Telecom, Military, Data Centers, Wireless backhaul, Power/Utilities, Municipalities, Government, University, Healthcare, Airport and Corporate Campuses.
Inflatable Cable pipeline Seals systems The culvert without the application of sealing construction will bring the humidity and stagnant water to substation basement, culvert and manual well. In such environment, the corrosions and damages to culvert tray and electrical equipment are unavoidable. The common method is the use of inflatable type culvert sealing product, to stop the water into underground culverts nearby these facilities in a simple and effective way. Inflatable type culvert sealing system, which have been widely used in the design of underground culvert constructions in the industries of electric system, telecommunications, port, urban construction, rail transportation and so on. Provide a clean and dry operating environment to cables and other electrical equipment after installation, improve the degree of protection, and reduce the works of cleaning up sludge and stagnant water in the manual well before the maintenance works Application 1.For power cables. 2.For two or more cables,sealing clips are required. 3.Inflation tool is available to provide. 4.Casters of compressed air or CO2 are COMPATIBLE, or water. 5.Each seal covers a large range of cable and duct diameters. 6.IDSS seals can be installed when water is still flowing out of the duct_saving valuable installation time. 7.Use not only for new cable installations but also for existing applications. 8.IDSS seals can be quickly and easily removed from a duct or pipe by deflation.
air inflatable seals are used to seal cable running in ducts against water and gases. They feature full re usability, sealing of multiple cables without separation clips and durable sealing behaviour (>20 years), reducing total cost of ownership with regards to alternative sealing solutions. Furthermore, they use no CO2 as inflating agent, then protecting our environment. Reasons for using sealing technology for feedthroughs to protect against water entry or gas diffusion e.g. carbon monoxide ï?·Prevention of personal injury caused by gas diffusion ï?·Prevention of damage to property in buildings and technical rooms ï?·Prevention of short-circuits caused by water entry ï?·Prevention of network failure caused by optical fibre breakage (optical fibres are particularly sensitive to water entry or immersion in water) Cable manhole facilities do not have to be pumped out Prevention of costly repair and renovation measures
Provide both Chain extender grade and No chain extender grade Outstanding physical properties High quality and stable production Low Acid value Shelf life: 12 months Fully Certificate: BPI, DIN CERTO OK COMPOST, FDA, Food contact Various kinds of products
Windows ice scraper. Very simple, handy, and resistant. Dedicated printout is possible. Quantity and colors to be agreed. Price depends on the quantity, packagings etc. Short production leadtime.
New study specialty product with mutifuntion as below description,The price and MOQ can be negotiated: 1.function: High pressure water pump, can be used as car wash/decontamination cleaning 2.application scene: Cars, SUV,truck,different kinds of vehicles 3.Large capacity: built-in 5C 3.7V/2000mAh high-capacity and high-safety 8 pcs 18650 batteries connected in series (8S1P 29.6V 59.2WH); 4.Water pump function: This product integrates a high-pressure water pump, which can be used as a car wash/decontamination cleaning; 5.Ultra-high efficiency charging: 12V/2A / 24W charging efficiency>70% DC interface 3.5*1.2*7.5mm. It can be charged at home or in the car; 6.Removable battery pack: Easy to install and remove. Easy to operate when charging or changing batteries; 7.urable: Built-in battery charge and discharge cycles â?¥ 500 times;� 8. Ultra high water pressure: 11BAR 9.Safe and reliable: The lithium battery protection IC is designed for battery inside: it can effectively prevent the battery from overcharging, over-discharging and over-current; 10.Detachable water nozzle design: easy to store. Does not take up space;� 11.A variety of water outlet methods can be selected: rotating � water nozzle. The water outlet method can be changed. It is convenient for users to adjust the most suitable water column or spray; 12.Super long rang: 4 meters. Welcome to know more details for further progress,thx for cooperation.
shovel description mention: Weight:2.5kg +/- 50g, without handle
TUF Marine Electric Winch for Accommodation Ladder is fabricated in accordance with ISO7364 and China National Standard GB1392. It is used to hoist and lower accomdation ladder of a ship. TUF designs it with compact structure and electric/manual control. There are right-hand, left-hand, and symmetrical double drum types available. All TUF accommodation ladder winches are strictly tested before they leave our factory. Please email to admin@tufinc.com to get price and drawing in 12hours. Capability: 10KN, 16KN, 20KN, 25KN, 30KN. Available IACS Certs: ABS, BV, CCS, DNV-GL, KR,LR, NK,RMRS and etc.
Introduction: YK-1600SFL Single Facer Line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories. Specification: Working Width YK-1400SFL 1400mm YK-1600SFL 1600mm YK-1800SFL 1800mm Heating method Electrical heating/Oil heating / Steam heating Design speed 100-120m/min Economical speed 80-100 m/min Compress-air pressure 0.4-0.9MPa Flute type Standard flute UV Flute single facer line Standard spec. A,B,C,E,F For other type and model, we can produce as customerâ??s requirement. hydraulic shaftless mill roll stand structural feature Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and othersï¼?the lifting of the paper adopts hydraulic drive. Brake adjustable adopts multipoint braking system. Every stand matched two sets paper car , and they can paper on the both sides at the same time. Technical parameters 1 the range of clamping paper MAX1600mm MIN1000mm 2 clamping diameters MAX1500mm MIN 350mm 3 main shaft diameter of paper holder 242mm 4 gas source work pressure Mpa 0.4---0.8Mpa
Dimension of sliding table saw 3200*375mm Gross cut capacity 3200mm Width of cut between saw blade and ripe fence 1750mm Saw blade 300mm(250-300) Height of cut 300mm 70mm Speed of main saw blade 4000/6000r.p.m Tilling saw blade 45-90 degree Main motor 5.5kw(7.5HP) Scoring saw blade diameter 120mm Speed of scoring saw blade diameter 8000r/min Scoring motor 1.1kw Net weight 750kg Overall dimensions 3200*2550*900mm Loading 20GP/40HQ 10SETS/22SETS
Electric Motor Driven Mooring Winch can be used to hold and haul mooring rope stored in its drum driven by electric motor through gear box. It consists of level wind device, electric motor, gear reduction, jaw clutch, brake, reversing push button station, and base which could be mounted to deck support structure. through bolts. TUF Marine designs and builds its electric mooring winches with materials and equipment in accordance with the requirements of ISO 3730, ASTM,OCIMF and customers customized specs. Capacity Range: 10KN-350KN. Available IACS Certs: ABS, BV, CCS, DNV-GL, KR,LR, NK,RMRS and etc.
This tool is designed to handle different set sizes of terminals and is perfect for both production operations and maintenance applications. It is a must-have wherever specialty connectors are required. The various crimp sizes are even color-coded for added convenience. Buy online Ratchet Crimper For Flag Terminal in that is used with insulated & Crimps flag terminals. Order best Crimping Tools Online
Convenient and stylish Crimping tool for single, twin, insulated, and non-insulated cord end terminations. With several pressure adjustment portions and a close to release fibre glass nylon handle. The unique design applies pressure while crimping from four slides with a square contour. Buy online Cord End Crimper in that is popular because of its precise and secure crimping or cords. Order best Cord End Terminals from
