Product description: Transformer load box is also called current transformer load box, voltage transformer load box, PT load box and CT load box. Current, voltage transformer load box and transformer load box. When testing current and voltage transformers, PT/CT mutual inductance The load box provides a variety of effective loads and is an ideal accessory product for various transformer verification devices. Major Technical Index 1. Environmental conditions Temperature Humidity
Product description Insulation resistance tester with absorption ratio embedded real-time industrial microcomputer operating system, ultra-thin wire-shaped sheets header with the perfect combination of dot matrix liquid crystal display, the instrument is with a variety of voltage output level (250V,500V,1000V,2500V,5000V,10000V), high capacity, strong anti-interference, the pointer and digital synchronous display, AC-DC dual-use, simple operation, automatic calculation of various insulation index (absorption ratio, polarization index), all measured characteristics with the anti-power-down function . Technical index Measuring range and accuracy (Temperature, humidity: 23RH) Model BC2305 Rated Voltage 250V 500V 1000V 2500V 5000V Measuring Range
Product description Ground continuity tester is the connecting part of power equipment and grounding gird, during long time run of power equipment, Connection is likely due to moisture and other factors, node corrosion, even fracture phenomenon, lead to lead off the assembly line and the main grounding grid connection point resistance increase, there is no security risk in the operation of the equipment, serious when will cause the equipment to run away from the grounding grid. Technical index Technical parameter
Overview Light digital relay protection tester characteristics; 4/6/8 pairs of 100M Optical Fiber Communication Ethernet interface, can send and receive the sampling value of the IEC61850-9-1 / 2 frame format, Goose, IEEE-1588 packets; more support 24 sets of SV packets +64 groups of Goose packets simultaneously; 3/5 pairs of 2 10M fiber serial port, can send and receive IEC60044-7 / 8 FT3, national network expansion FT3, Xu Ji privately owned FT3 frame format sampling value 12 road simulation small signal output, provides testing of protection devices input for small signals; Technical parameter: Fiber Ethernet port S, ST, Mode, 1310nm; IEC61850-9-1 / 2 / Le, Goose, IEEE-1588; Send dispersion:
Overview The digital millisecond tape RS232 communication interface is widely used in electric power, electronics, telecommunications, railway, transportation and electromechanical, mechanical and other departments. It is used to measure the electromagnetic contact, remote device, and automatic device various action time, action intervals, machinery. The contacts, contacts, power switch main contacts, time, three phases, interval, tensile interval, tensilate, slightly separation, interval between closures, hierarchics, tensile gain machine B contact, and Active pulse lines such as various band switches, lock switches, limit switches, and universal conversion switches are (also available for sports), and measure the speed of the A point to the B point. Technical parameter: Measuring range 0.0001-999.9999 seconds Timing accuracy 0. 01% 2 words power supply AC 220V 10% 50Hz power 5W input signal Mechanical air contact or electrical signal (5-20V) Reset method Manual or software clearing Relative humidity 80%RH Dimensions 195*175*80 weight 1.5 kg
WOODEN SWEAT SCRAPER
Functional characteristics Transformer capacity and no-load tester Measure the transformer load current, load loss, short-circuit voltage, short circuit (load) losses, capability. Main technical parameters Capacity measuring range : 30kVA 31500kVA Current measuring range: 0 -100A auto-switch the measurement range Current measurement accuracy: (0.2% + 3digits) Voltage measurement range: Line Voltage0-750V;phase voltage 0-450V, auto-switch the measurement range Voltage measurement accuracy: (0.2% + 3digits) Insulation resistance: Leakage current:
Light Weight & Compact Best for Winching on Small Fishing Boats Simple: Just wire to the battery (12V, 24V) 2 speeds FAST/SLOW, change with lever Applications Winding anchor for boats / Drawing fishing net / Towing line / Winding up basket Material of motor case and roller : Corrosion resisting aluminum alloy and polyurethane coating Made in Japan PDF Catalog http://solid-corp.com/wp-content/uploads/catalog-marine-battery-winch-logo-2021.12.28.pdf
Price - Euro 99.00 90 day warranty feature-icon Return guarantee feature-icon free delivery technical condition All functions work 100%. 90 day warranty. 14 day money back guarantee. SV03 General features Pump type: Manual feed Power supply: Battery Battery type: Li-Ion Charging time: 2.5 h Autonomous operation time (min.): Normal mode - 20 min., Max mode - 6 min. Automatic charging: none Suction power: 100 watts Power regulation: On the housing Cleaning Method of cleaning: Dry cleaning Dust collector type: Container Dust collector capacity: 0.38 l Dust collector full indicator: Yes Steam cleaning: None Designed for people with allergies: none Nozzles Nozzle for floors and carpets: Not available Slit nozzle: Available Mini Dust Nozzle: Available Electric nozzle: Available Charging station: Yes * The product may differ from the product shown in the photo. For example, color.
Product Introduction: Arrester Discharge Counter Calibrator is used for discharge action logger inspection and verification of discharge counter in valve-type arrester including silicon carbide common valve type (FZ and FS), silicon carbide magnetic blow valve-type (FCZ and FCD) and zinc oxide arrester. It is used to verify the reliability of various lightning arrester counter actions. The reliability of the counter action is very important to the power system. It is an important parameter to record the number of lightning strikes by the lightning arrester in normal operation. It can provide the staff of the power system with an important basis for the targeted inspection of the arrester. This instrument is mainly used for high-voltage arresters above 35kV. Product Parameters: 1.Ambient temperature 2.Relative humidity 3.atmospheric pressure:86 106kPa 4.Discharge test voltage: 2kV 5.Charge time: 1 minute
Introduction AC transformer ratio tester is an innovative product are mainly applied to change than group test transformer, PT and CT polarity test, test speed, high accuracy. Technical Indicators Working power supply AC22050/60 HZ Instrument weight 3.8 kg Instrument dimension 325 mm L 225 mm W 125 mm H Use of temperature -10 50 Relative humidity 90 No dew Functional Characteristics It has the function of blind measurement, that is, to perform variable ratio and group test when there is no connection between high and low voltage. Based on the test of conventional transformer, Z-type transformer and PT sample, the polarity test function of CT variable ratio is added, and the application field is wider Wide range and high accuracy, the variable ratio measurement range can reach 10,000, and the test accuracy can be guaranteed 0.3% when the maximum value is 10,000. It has perfect protection functions such as reverse connection protection and output short circuit protection. AC transformer ratio tester Packaging Content Standard accessories 1 transformer turn ratio tester 1 sets of test lines (red and black each) 1 power cord 1 print user manual 1 copy of certificate and factory test report
Overview Hand-held transformer turn ratio tester is an innovative product with compact size, hand-held operation, more portable and easy to carry. Technical index Range 0.9 10000 Accuracy
Main technical parameter: 1), Model: MJ6132TYA sliding table panel saw 2), Motor power: 4kw/0.75kw 3), Saw blade diameter: 300mm/120mm 4), The length of sliding table is 3200mm 5), Manual control saw blade lifting 6), Manual control saw blade tilting, with readout device. 7), With one set of European protection cover 8), With one set of saw blade (FREUD brand) 9), With oil supply device 10), With two pieces of auxiliary working platform Optional length: 2800mm(MJ6128TYA), 3000mm(MJ6130TYA), 3800mm(MJ6138TYA)
Issues in CAD handling and Design - Trust Citiuskbe Tool Kit, we will handover and deliver, we are with you in the productivity journey.
The end cover of the ball mill is one of the key components of the ball mill, so the structure is also relatively complex, the processing cycle time is long, and the precision of processing and assembly is very high. Therefore, in the preparation process route, it is necessary to fully consider their Craftsmanship. The end caps are located at both ends of the ball mill barrel and are supported on the bearings. The main function is to support the material as well as the barrel and the medium. The root fillet of the hollow shaft end disc used in the ball mill should be concentrated area. Please contact us for more details
THY Precision Optics Micro Molding offers optical plastic components injection molding services with international quality standards. THY Precision specializes in offering a variety of high precision plastic optical micro molding components manufactured with high quality raw materials, using state-of-the-art technology and the latest machinery to yield long lasting products. All of our optical and transparent parts are manufactured in our injection clean room (class 100K). We are major providers of TV LED light beams, lens holders, lens barrels, lens spacers, lens retainers, lens hoods, optical mouse lenses and transparent parts. Our expertise allows us to offer a comprehensive range of Micro Optical components such as optoelectronics and fiber optics parts, all developed to comply with International Quality Standards.
We are dedicated to provide High Quality, economically priced solution to your cable containment needs. We offer a full range of Cable Management System with Standard Products and also manufacture specials as per project requirements.
We offer an extensive range for professional users focused on the competence areas of metal industry and metal trades, construction trades and renovation. Different power tools: Cordless Tapper,cordless Hammer Drill,cordless Drill,cordless Screwdriver,Cordless Die Grinder,cordless Jig SAW
KRD32 series non-standard centrifugal constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal motion, dual-environmental force centrifugal motion and central high-speed rotating motion, so as to assess the anti-load performance of electronic components, small components and other electrical and electronic products and detect the anti-load performance specifications. It is mainly used for routine dynamic structural integrity and adaptability tests of components, small parts and small complete machine on aircraft. The acceleration rising rate is large Computer centralized control and measurement Fully digital network closed-loop remote control, high control accuracy Complete safety protection functions Technical Specifications Model KRD32-1 KRD32-2 KRD32-3 KRD32-4 KRD32-5 Dual-environment centrifugal constant acceleration tester High-speed spin tester Centrifugal dynamic overload tester Spin shock compound tester Centrifugal vibration compound tester Max. Load (kg) 5 5 50 3 1000 Max Acceleration (g) 150 / 20 Shock 10000g--1ms 50g Loading Rate (g/s) Customized / 10 / Standard Electro-Dynamic Shakers specifications Installation Radius (mm) Customized / 1500 / Customized Max. Rotating Speed (R/Min) 0-3000 0-100000 / 0-10000 / Collector Ring Optional according to user requirements Control Method Fully closed-loop digital network (remote) automatic control + manual control Power Supply AC 380V ± 10 50Hz Working Environment Temperature range 0 40, humidity 80% no condense)
Warranty: 12 months Place of Origin: Guangdong, China Brand Name: Rawsuns Model Number: RDD1100 kit Type: Synchronous Motor Frequency: 50HZ Phase: Three-phase Protect Feature: Waterproof AC Voltage: 115/120 V Efficiency: IE 2 IP Grade: 67 Battery Rated Voltage(VDC): 540 Motor Weight (kg): 125 Motor Rated (Kw): 80 Motor Peak (Kw): 160 Rated Torque (Nm): 500 Peak Torque (Nm): 1100 Rated Speed(rpm): 1528 Peak Speed (rpm): 4500 Product Name: electric car kit complete electric car kit complete synchronous motor
