Overview
The digital millisecond tape RS232 communication interface is widely used in electric power, electronics, telecommunications, railway, transportation and electromechanical, mechanical and other departments. It is used to measure the electromagnetic contact, remote device, and automatic device various action time, action intervals, machinery. The contacts, contacts, power switch main contacts, time, three phases, interval, tensile interval, tensilate, slightly separation, interval between closures, hierarchics, tensile gain machine B contact, and Active pulse lines such as various band switches, lock switches, limit switches, and universal conversion switches are (also available for sports), and measure the speed of the A point to the B point.
Technical parameter:
Measuring range 0.0001-999.9999 seconds
Timing accuracy 0. 01% 2 words
power supply AC 220V 10% 50Hz
power 5W
input signal Mechanical air contact or electrical signal (5-20V)
Reset method Manual or software clearing
Relative humidity 80%RH
Dimensions 195*175*80
weight 1.5 kg
The digital millisecond tape RS232 communication interface is widely used in electric power, electronics, telecommunications, railway, transportation and electromechanical, mechanical and other departments. It is used to measure the electromagnetic contact, remote device, and automatic device various action time, action intervals, machinery. The contacts, contacts, power switch main contacts, time, three phases, interval, tensile interval, tensilate, slightly separation, interval between closures, hierarchics, tensile gain machine B contact, and Active pulse lines such as various band switches, lock switches, limit switches, and universal conversion switches are (also available for sports), and measure the speed of the A point to the B point. Technical parameter: Measuring range 0.0001-999.9999 seconds Timing accuracy 0. 01% 2 words power supply AC 220V 10% 50Hz power 5W input signal Mechanical air contact or electrical signal (5-20V) Reset method Manual or software clearing Relative humidity 80%RH Dimensions 195*175*80 weight 1.5 kg
Parameters 1.Input Voltage:90-240V 2.Output power:120W 3.Control motor:Stepper motor 4.Lifting method:motor lifting method 5.Lifting height:small and equal 30mm non-working state(small and equal 12mm working state) 6.Pressure adjustment:spring asjustment 7.Support maximum speed:6000rmp/min 8.Applicable models:single and double sewing machine,herringbone machine,stretch sewing machine and etc Product advantage 1.Independent research and development of electronic control to achieve high speed and sewing machine synchronization. 2.Independent motor lifts the digital puller without air supply. 3.Traction is 1.5 times that of ordinary digital puller. 4.Patented pull-down lift digital puller switch for easy installation. 5.Fine-tuning the digital puller stroke according to the thickness of the fabric.
ATTEN Intelligent digital display rework station For PCB chip soldering repair, 1000W Whirlwind ATTEN ST-862D lead-free hot air gun soldering station. Feature : -The LCD screen displays the operating temperature and status to achieve visual and human-machine interaction. -Menu-style operation, three sets of fast temperature / air volume access keys to achieve common temperature fast switching, 100 �° C -480 �° C -Strong airflow with brushless fans -Plug-in heating chip replacement is fast -Straight wind and spiral wind convertible -Automatic sleep -Temperature lock function, timed work function -Software calibration temperature control function, temperature compensation, to achieve constant temperature work Function: 1: Three regular channels are "1", "2" and "3". Each channel's parameters including temperature and airflow can be set. 2: Real time operation by the magnetic switch. It will Cooling status when the handle is placed on holder, When the temperature drops to 100 degrees Celsius into sleep mode. 3: Auto sleeping function. Parameters can be set in sleeping state. 4: Closed loop sensor. Temperature can be controlled by zero voltage triggering modes, and adjusted conveniently, accurate and stable, not affected by airflow. 5: Large power, rapid heating. 6: A multipurpose unit, having brushless whirlpool motor, wide range. 7: An automatic cooling system can prolong the life time of heating element and protect the handle.
Supplier: Digital and analog measurement tools, pressure calibrators & controllers, digital pressure gauges, temperature calibrators & furnaces, thermometer readouts / probes, data acquisition, multifunction process calibrators, pneumatic pumps, hydraulic pumps, software, intelligent digital pressure modules, accessories, humidity calibrators, intrinsically safe products, atex infrared cameras, infrared ir windows, digital cameras, ultrasonic testers
Services: Export, pre and post sales service and support
Supplier: Digital controlled auto-cutter, auto-cutting machine, auto-spreader, 3D human body scanning system, hanging system, intelligent storage system
Short Description: Model CR606-HT The debug tool is used to read the data of Changruns full range of fuel sensors and accessories, set its function parameters and perform fault diagnosis. It can completely replace the work of the computer, and has the advantages of convenient carrying and simple operation. The debug tool can first be used to calibrate the fuel tank. It can simultaneously read the instantaneous percentage of the oil volume, the instantaneous digital value, the filtering percentage, and the filtered digital value. The liquid level status of the current device is displayed. The debug tool supports both RS232/RS485 digital signals and can set the RS232/RS485 signal listening mode (receive data only). Other functions of this product include: setting RS232/RS485 digital communication fuel volume sensor, CR606TS signal conversion module, CR606TC modem damping value, equipment ID, timing report, resistance table (CR606TC specific), debugging original car fuel meter, reading the internal parameters of the sensor and accessories. Performance Working voltage: built-in lithium battery 1000mAh 3.7V Communication method: RS232/RS485 Operating temperature: -35 ° C +70 ° C Output voltage: DC 10V Set the resistance: 4-200Ω Volume: length 109mm width 52mm height 23mm
Short Description: Model CR606-HT The debug tool is used to read the data of Changruns full range of fuel sensors and accessories, set its function parameters and perform fault diagnosis. It can completely replace the work of the computer, and has the advantages of convenient carrying and simple operation. The debug tool can first be used to calibrate the fuel tank. It can simultaneously read the instantaneous percentage of the oil volume, the instantaneous digital value, the filtering percentage, and the filtered digital value. The liquid level status of the current device is displayed. The debug tool supports both RS232/RS485 digital signals and can set the RS232/RS485 signal listening mode (receive data only). Other functions of this product include: setting RS232/RS485 digital communication fuel volume sensor, CR606TS signal conversion module, CR606TC modem damping value, equipment ID, timing report, resistance table (CR606TC specific), debugging original car fuel meter, reading the internal parameters of the sensor and accessories. Performance Working voltage: built-in lithium battery 1000mAh 3.7V Communication method: RS232/RS485 Operating temperature: -35 ° C +70 ° C Output voltage: DC 10V Set the resistance: 4-200Ω Volume: length 109mm width 52mm height 23mm CR606-HT debug tool(0% and 100%)
Supplier: Jiaduo frequoscillation pest-killing lamp, jiaduo intelligent pest forecast lamp, jiaduo microclimate information gathering system, jiaduo pest survey recording device, jiaduo quantitative airborne spore catcher, jiaduo pest inhibitor, jiaduo insect incubator, jiaduo agro-forestry ecological remote real-time monitoring system, jiaduo digital micro-imaging system and jiaduo insect inhaler
china coal 0001 Introduction Of XTZZL Intelligent Tensioning System 1. China Coal Group's intelligent tensioning system has double top or multiple top synchronous tensioning, automatic measurement of oil pressure and top extension, which can simultaneously control the strength and elongation, reduce the error accuracy can reach 1% FS. 2. Using the hydraulic circuit self-locking function, it can maintain the state of the oil cylinder for a long time after stopping the oil supply. 3. According to the parameters, it is automatically verified whether the tension is qualified during the tensioning process, and the elongation is excessively long or insufficient for automatic shutdown. Automatic or manual compensation is performed according to actual conditions. 4. It adopts servo control system, touch screen operation, imported PLC control, digital control hydraulic pump station main and auxiliary stations and computer wireless connection, remote operation. Easy to move, operating system is easy to learn. 5. Record tension data in real time, automatically organize data, generate reports, and intelligently manipulate tensioning processes to truly realize intelligent operations. Parameter Of XTZZL Intelligent Tensioning System Name Parameter System Tension Force Accuracy 0.25%F.S Displacement Measurement Accuracy 0.05%F.S Operating Temperature -20- +70 Monitor Computer Operating Voltage 220V 50Hz Hydraulic Sensor Accuracy 0.2%F.S Hydraulic Sensor Range 0-60Mpa Pump Station Rated Flow 3L/min Pump Station Rated Working Pressure 50Mpa Pump Station Operating Voltage 380V(10%) 50Hz Jack Tension 270-6000KN Single Pull Distance
