Thermocouple Thermometer RTM-1003
1.Introduction:
RTM1003 is a hand-held of 3-channel thermocouple thermometer, which uses thermocouples as sensors to measure temperature signals, can meet the needs of different industries. Used to measure the temperature of liquids, gases, solids and surface temperature. And there are a variety of thermocouple types to choose from, which are widely used in industrial production, research and development experiments, quality control, refrigerated storage, automobile manufacturing and other occasions.
2.Features:
Large LCD with display. It can display three values at the same time.
Thermocouple(K/J/E/T) temperature measurement.
The types of 3-channel thermocouple are switched simultaneously.
Temperature unit (C/F).
High resolution.
High accuracy.
Maximum and minimum values display.
With the displayed values hold function.
Battery indication function.
Automatically power off.
3.Specifications:
Display: Backlit LCD
Range: E-type: -238~1832F (-150~1000C)
J-type: -346~2192F (-210~1200C)
K-type: -328~2501F (-200~1372C)
T-type: -418~752F (-250~400C)
Resolution: -100~+100, 0.1; Other, 1
Temperature Unit:F/C
Sampling Channel: 3 Channels
Display Value Hold:
Open Thermocouple Indication:
Maximum and Minimum:
Automatically Power Off:
Operating Conditions: Temperature: 32F~122F (0C~50C); Humidity:
Thermocouple Thermometer RTM-1001
1.Introduction:
RTM1001 is a hand-held digital thermocouple thermometer, which uses thermocouples as sensors to measure temperature signals, can meet the needs of different industries. Used to measure the temperature of liquids, gases, solids and surface temperature. And there are a variety of thermocouple types to choose from, which are widely used in industrial production, research and development experiments, quality control, refrigerated storage, automobile manufacturing and other occasions.
2.Features:
Large LCD with display.
Hand-held design, easy to use.
Thermocouple(K/J/E/T) temperature measurement.
Temperature unit (C/F).
High resolution.
High accuracy.
Maximum and minimum values display.
With the displayed values hold function.
Battery indication function.
Automatically power off.
3.Specifications:
Display: Backlit LCD
Range: E-type: -238~1832 F (-150~1000 C)
J-type: -346~2192 F (-210~1200 C)
K-type: -328~2501 F (-200~1372 C)
T-type: -418~752 F (-250~400 C)
Resolution: -100~+100, 0.1; Other, 1
Temperature Unit: F/ C
Sampling Channel: 1 Channel
Display Value Hold:
Open Thermocouple Indication:
Maximum and Minimum:
Automatically Power Off:
Operating Conditions: Temperature: 32 F~122 F (0 C~50 C); Humidity:
RTM1511 High-precision Resistance Thermometer
1.Introduction:
RTM1511 is a high-precision RTD thermometer that uses PT1000 platinum thermal resistance as a sensor to measure temperature signals. Large LCD screen display, 0.01 Resolution, refresh once per second, accuracy up to �±0.1�°C. With data memory and view functions. Widely used in industrial production, research and development experiments, quality control, refrigerated storage, automobile manufacturing and other occasions.
2.Features:
* Large LCD with display.
* High-precision PT1000 platinum thermal resistance is used for temperature measurement.
* Temperature unit (�°C/�°F).
* 0.01 resolution.
* Accuracy up to �±0.1�°C.
* With data memory and view functions (99 Groups).
* With the displayed values hold function.
* Maximum and minimum values display.
* Battery indication function.
* Automatically power off function.
3.Specifications:
Display: LCD
Sensor: PT1000
Range: -200~500�°C (-328~932�°F)
(Depend on Probe)
Accuracy: �±0.1�°C
Resolution: 0.01
Sampling Channel: 1 Channel
Unit: �°C/�°F
Data Memorized: 99 Groups (Can be Customized)
Operating Conditions: Temperature: 0~50�°C; Humidity: 0~80%RH (No Condensation)
Storage Conditions: Temperature: -10~60�°C;Humidity: 0~90%RH (No Condensation)
Power Supply: 4Ã??1.5V AAA(UM-4)Battery
Size: 170*80*31mm
Weight: 176g (Not Including Batteries)
4.Standard Accessories:
Main Unit
PT-01A Probe (Range: -50~200 (-58~392 ))
Manual
Carrying Case
RAW700 Portable Water Activity Meter
1.Introduction:
It is a portable water activity meter, which can measure the water activity of solid (powder, granular, block), liquid and pasty samples. It is mainly used for the effective moisture that microorganisms can use or participate in chemical reactions in the reaction equilibrium state, product stability and microbial reproduction ability. Widely used in food processing, feed production, chemical and pharmaceutical, scientific research, experiments and other occasions.
2.Features:
* Large LCD with display.
* It can display water activity and temperature of samples at the same time.
* The backlight brightness can be adjusted.
* High-precision sensor.
* High accuracy and stable performance.
* The measuring time is 5 minutes and easy to operate.
* With data memory and view functions.
* With battery indication function.
* With automatical power off function.
3.Specifications:
Display: LCD
Sensor: Non-conductive Humidity Sensor
Range: 0.00~1.00aw
Accuracy: �±0.02aw
Resolution: 0.01
Measuring Time: 5 Minutes (General Sample)
Data Memorized: 99 Groups
Operating Conditions: Temperature: 0~50�°C; Humidity: 0~80%RH(No Condensation)
Storage Conditions: Temperature: -10~60�°C; Humidity: 0~90%RH(No Condensation)
Power Supply: 3*1.5V AAA(UM-4) Battery
Size: Main Unit: 75mm*23mm*151mm
Sample Cup: �?35mm
Weight: 323g (Including Batteries)
4.Standard Accessories:
Main Unit,
Sample Cups,
Manual,
Carrying Case
The special six fixed blade stabilizer is an upgraded product of the conventional spiral stabilizer, which makes up for the shortcomings of the conventional spiral blades. Optimized design and innovations can improve drilling performance, make tripping easier, and reduce the risk of downhole accidents.
Features:
An enhanced hydrodynamic shape;
Six blade designed for full contact with well;
For hole 6in,8 1/2in,12 1/4in,16in;
Low friction blades, high abrasion resistance carbide;
Advantages:
Reducing torque and drag and torsional vibration;
Reduce backreaming;
Reduce clay balling;
Eliminate requirement for wiper trips;
Improve BHA stabilization;
Increasing overall drilling efficiency;
Smooth torque while drilling;
EMI receiver system for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. The EMI-9KB EMI receiver is made of full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the EMI Test System, it solved the instrument self-EMI problem. The test results are according to the international format test report. The EMI Test System EMI-9KB fully meets CISPR15:2018, CISPR16-1, GB17743, FCC, EN55015 and EN55022.System Configurations:
EMI-9KC Test System includes: EMI-9KC EMI Receiver built-in Attenuator (9K-1GHz), LISN Artificial Network Power, CDNE-M316 Coupling/Decoupling Network for Emission, Isolation Transformers, Attenuator and cables.
EMI-9KB Test System includes: EMI-9KB EMI Receiver (9K-300MHz), LISN Artificial Network Power, CDNE-M316 Coupling/Decoupling Network for Emission, Isolation Transformers, Attenuator and cables.
EMI-9KA Test System includes: EMI-9KA EMI Receiver (9K-30MHz), LISN Artificial Network Power, Isolation Transformers, Attenuator and cables.Option instruments to work with the EMI-9KC, EMI-9KB and EMI-9KA EMI receivers:
LISUN LSP-500VARC/LSP-1KVARC Pure Sine Wave AC Power Source for EUT
LISUN SDR-2000B Magnetic Shielding Cabinet for the EMI Receiver System
LISUN VVLA-30M Three Loop Antenna to test 9k-30MHz radiation
LISUN AB-CLP Absorbing Clamp to test the home applications & motor tools
LISUN VOL-CP RF Current Probe to the conducted disturbance voltageSpecification:
Detection frequency range: 9kHz~1GHz (EMI-9KC), 9kHz~300MHz (EMI-9KB), 9kHz~30MHz (EMI-9KA)
Frequency stability: 1 10^-6
Frequency resolution: (9kHz~150kHz) 30Hz; (150kHz~30MHz) 1kHz
Test Tolerance: ±2 dB
Measure and Detection method: PK, QP and AV
Measure range: 20dB V~140dB V
Frequency scanning step frequency: 20Hz~2MHz
Sweep bandwidth: 200Hz; 9kHz; 120kHz
Connect PC via USB cable and software can run on Win7, Win8, Win10, Win11
According to IEC60695-2-2, IEC60695-11-5 and GB/T-5169.5, ZY-3/ZY-3S needle flame test equipment is applied in the production and quality control department of lighting products, hyperpiesia electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, the apparatus is suitable for the industry of insulation material, engineering plastics and solid combustible material.Specifications:
Angle of burner: 45�° (when in test) / 0�° (when adjust the flame height)
Needle flame burning time: 0~999.9s ±0.1s (adjustable, 30s in general)
After-flame time: 0~999.9s ±0.1s, auto record and pause manually
Height of flame: 12mm±1mm (gauge is included)
Gas: 95% butane
Test range of temperature: 0~1000
The temperature rises from 100 ±2 to 700 ±3 within 23.5 seconds ±1s
Thermocouple: 0.5mm K type
Applied with touch screen and remote controlTo save the delivery cost for the oversea market, LISUN designed a compact version needle flame test equipment weighing less than 50kg. (Customer need to prepare additional ventilation system for ZY-3S)
What is a needle flame test?
The full name of IEC 60695-2-2 is Fire hazard testing Part 2: Test methods Section 2 Needle-flame test. It was prepared by IEC technical committee 89: Fire hazard testing. The following is the related introduction of IEC 60695-2-2 Scope.This section of IEC 60695-2-2 specifies a needle-flame test to simulate effect of small flames which may result from fault conditions within equipment, in order to assess by a simulation technique the fire hazard.It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating material or other combustible materials.What is flame retardant test methods?
In the case of horizontal needle flame test HB classification, the sample size is required to be 125mm in length, 13mm in width, and no more than 13mm in thickness. The sample is placed horizontally, the sample clamp is clamped to one end of the sample, and the ignition device is at a 45 degree angle to keep the flame position unchanged. Apply 30±1S to the other end of the sample holder, and place a metal mesh and a freely movable fixed frame horizontally under the sample holder,
Product Description
The LS9955/LS9956 Automatic Safety Test System (electrical safety analyzer) combined the following function in one set: Withstand Voltage Test (AC/DC), Insulation Resistance Test (IR), Leakage Current Test (LLC), Grounding Resistance Test (GR) and Power Test.
The LS9955/LS9956 Automatic Safety Test System is according to GB4706.1, IEC/EN60335-1, UL60335, GB7000, IEC60598, GB4943, IEC60950 and GB9706.1. It is used for luminaries, home application and motor tools safety test in production line or R&D Lab.
Specification:
Remote control device and can control by software (Optional)
Display all setting parameters and testing results in the same big LCD menu
PASS/FAIL limit values can be set. It has alarm sound and indicator light
Test mode programmable; 50 groups setting available, 8 test steps per group
Quick discharge. Support 50Hz and 60Hz frequency; Electric safety wall detecting feature
�¢?�¢ The LS9955 can do test for Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC) and Ground Resistance (GR)
The LS9956 can test for Withstand Voltage (AC/DC), Insulation Resistance (IR), Leakage Current (LLC), Ground Resistance (GR) and Power
How does "CITIUSKBE TOOL KIT" help a company in the design process
"CITIUSKBE TOOL KIT" will help in speeding up the design process and validate the designs for Parts, Large Assemblies as well as Drawings.
Do you want to monitor NX utilization across the organization Citiuskbe Tool Kit helps you in monitoring and improving utilization and optimizes investment in NX software.
14875 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
