According to IEC60695-2-2, IEC60695-11-5 and GB/T-5169.5, ZY-3/ZY-3S needle flame test equipment is applied in the production and quality control department of lighting products, hyperpiesia electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, the apparatus is suitable for the industry of insulation material, engineering plastics and solid combustible material.Specifications:
Angle of burner: 45�° (when in test) / 0�° (when adjust the flame height)
Needle flame burning time: 0~999.9s ±0.1s (adjustable, 30s in general)
After-flame time: 0~999.9s ±0.1s, auto record and pause manually
Height of flame: 12mm±1mm (gauge is included)
Gas: 95% butane
Test range of temperature: 0~1000
The temperature rises from 100 ±2 to 700 ±3 within 23.5 seconds ±1s
Thermocouple: 0.5mm K type
Applied with touch screen and remote controlTo save the delivery cost for the oversea market, LISUN designed a compact version needle flame test equipment weighing less than 50kg. (Customer need to prepare additional ventilation system for ZY-3S)
What is a needle flame test?
The full name of IEC 60695-2-2 is Fire hazard testing Part 2: Test methods Section 2 Needle-flame test. It was prepared by IEC technical committee 89: Fire hazard testing. The following is the related introduction of IEC 60695-2-2 Scope.This section of IEC 60695-2-2 specifies a needle-flame test to simulate effect of small flames which may result from fault conditions within equipment, in order to assess by a simulation technique the fire hazard.It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating material or other combustible materials.What is flame retardant test methods?
In the case of horizontal needle flame test HB classification, the sample size is required to be 125mm in length, 13mm in width, and no more than 13mm in thickness. The sample is placed horizontally, the sample clamp is clamped to one end of the sample, and the ignition device is at a 45 degree angle to keep the flame position unchanged. Apply 30±1S to the other end of the sample holder, and place a metal mesh and a freely movable fixed frame horizontally under the sample holder,
Ignition needle series: Ignition needles, induction needles are used in all kinds of gas stoves, gas water heaters, gas grills, gas heaters, ovens Ceramic insulator: 95% alumina, steatite porcelain, glazed on the surface Wire: Teflon FEP (200C 12KV), PFA (250C 12KV), PTFE (250C 25KV), Silicone (10KV 200C) Electrode needle: AISI304(850C), OCr25Al5(1250C), Cr20Ni80(1200C), KanthalD(1300C) Kanthal A1(1400C) Kanthal APM(1400C) Products can be customized according to customers
Supplier: Products are goniophotometer, integrating sphere, spectroradiometer, surge generator, esd simulator, emi receiver, emc test equipment, electrical safety tester, environmental chamber, temperature chamber, climate chamber, thermal chamber, salt spray test, dust test chamber, ip waterproof test, rohs test (edxrf), glow wire test and needle flame test, plug and switch testing, ac and dc power supply
LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer â?? Flicker Tester is equipped with Class A photo detector, so the sampling speed is up to 100kHz. It fully meets the requirement of BASIC, Energy Star V2.1, IEC TR 61547-1:2020 IEC-Pst, CA CEC, ASSIST, CIE TN006-2016 CIE SVM, IEEE Std 1789 standards, etc. It is professional for flicker test of LED lights and lamps, energy-saving lamps, etc. According to EU directives 1194/2012, 2009/125 / EC, SASO2902, COMMISSION DELEGATED REGULATION (EU) 2019/2015, COMMISSION REGULATION (EU) 2019/2020 and IEC60969 â??Self-ballasted Lamps for General Lighting Servicesâ??Performance Requirementsâ?? and other requirements. The LSRF-3 can connects with PC via USB cable. The English version software can be run in Win7, Win8 and Win10, Win11 (The driver was Certificated by Microsoft)
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires photometric, colorimetric and electrical measurement. The measured data meets the requirements of CIE 177, CIE84, CIE-13.3, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IES LM-79-19, Optical-Engineering-49-3-033602, IESNA LM-63-2, ANSI-C78.377 and GB standards The Sphere System Configuration: CCD Spectroradiometer (LMS-7000), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2008R), DC Power Source (DC-S Series), AC Power Source (LSP-500VAS), Integrating Sphere (IS-1.5MA-CASE and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W) Measurement: Colorimetric: Chromaticity coordinates, CCT, Color Ratio, Peak Wavelength, Half Bandwidth, Dominant Wavelength, Color Purity, CRI (Ra, R1 to R15), Spectrum Test, TM30 (Rf, Rg), CQS Photometric: Luminous Flux, Luminous Efficiency, Radiant Power, EEI, PAR, PPF Electrical: Voltage, Current, Power, Power Factor, Harmonic (Optional) Specification: Spectral Range Wavelength: 350nm~950nm(LMS-7000VIS) (200~1050nm is optional) Spectral Wavelength Accuracy: ±0.5nm Wavelength Reproducibility: ±0.5nm Sample Scanning Steps: �±0.1nm Accuracy of Chromaticity Coordinate (IOx, y):±0.003 (under Standard A Lamp) â?¢ Correlated Color Temperature CCT: 1,500K~25,000K. CCT Accuracy: ±0.5% Color Rendering Index Range: 0~100.0, Accuracy: ± (0.3%rd±0.3) Photometric linear: �±0.5% Stray light:
What is the definition of type C goniophotometer? LSG-6000 Moving Detector Goniophotometer (Mirror Type C) was manufactured by LISUN completely meets LM-79-19, IES LM-80-08, COMMISSION DELEGATED REGULATION (EU) 2019/2015, CIE-121, CIE S025, SASO 2902, IS16106 and EN13032-1 clause 6.1.1.3 type 4 requirements. LSG-6000 is the latest upgraded product of LSG-5000 and LSG-3000 in compliance with the requirements of the LM-79-19 standard Clause 7.3.1, its an automatic light distribution intensity 3D curve testing system for measuring light. The darkroom can be designed according to the customerâ??s existing room size. What is the use of goniophotometer? LSG-6000 gonio photometer manufacturer is LISUN, it can measure all types of lighting sources, LED, Plant Lighting or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
Phenol is an organic compound with C6H5OH. It is a colorless needle -shaped crystal with a special smell. It is toxic and is an important raw material for producing certain resins, sterilization agents, preservatives, and drugs (such as aspirin). It can also be used for the treatment of sterilized surgical equipment and excrement, skin sterilization, itching and otitis media. The melting point is 43 �° C, which is slightly soluble at water at normal temperature, and is easily soluble in organic solvents. When the temperature is higher than 65 �° C, it can solve the water in any proportion. The phenol is corrosive. After contact, the local protein degenerates. The solution can be washed with alcohol with alcohol. A small part of the phenol is exposed to the air by oxidation into pink. When the three -price iron ion becomes purple, this method is usually used to test the phenol.
Supplier: Medical Supplies, Surgical Products, Contact Lenses & Solutions, Optical Devices Etc, Laboratory Products, Laboratory Equipment, Diagnostic Reagents, Needles, Blood Glucose Meters, Blood Glucose Test Strips, Cosmetic Products
Supplier: All kinds of scientific and soil testing instruments, laboratory jaw crusher, vicat needle apparatus, masta gauge, industrial moulds, standard penetrometer, core cutting and core drilling machine, slump test apparatus, laboratory pulveriser, rapid moisture meter, aggregate impact tester, fatigue testing machine
Buyer: Mechanical stop watches and movement of digital stop clock
Supplier: Manufacturer, exporter, supplier, distributor of a wide range of x ray films, laser imaging film, resolute integrity coronary stent, disposable inflation device, medtronic guiding catheter launcher, radifocus sheath, surgical catheter, guide wire, covid 19 ag test kit, all types pharmaceuticals raw material etc. brands we deal in our trading brands are: carestream, fujifilm, konica minolta, agfa, terumo, medtronic, asahi, abbott, cordis, covidien, boston scientific, sd biosensor. situated in ahmadabad (gujarat, india), we have constructed a wide and well functional infrastructural unit that plays an important role in the growth of our company. we offer these products at reasonable rates and deliver these within the promised time frame. under the headship of â??mr. k. g. shahâ?? (owner), we have gained a huge clientele across the nation. we are exporting in botswana, nigeria, oman, bangladesh, zimbabwe, mauritius, brunei, papua new guinea, guyana, bahamas, bahrain, malaysia, dubai and
Buyer: Manufacturer, exporter, supplier, distributor of a wide range of x ray films, laser imaging film, resolute integrity coronary stent, disposable inflation device, medtronic guiding catheter launcher, radifocus sheath, surgical catheter, guide wire, covid 19 ag test kit, all types pharmaceuticals raw material etc. brands we deal in our trading brands are: carestream, fujifilm, konica minolta, agfa, terumo, medtronic, asahi, abbott, cordis, covidien, boston scientific, sd biosensor. situated in ahmadabad (gujarat, india), we have constructed a wide and well functional infrastructural unit that plays an important role in the growth of our company. we offer these products at reasonable rates and deliver these within the promised time frame. under the headship of â??mr. k. g. shahâ?? (owner), we have gained a huge clientele across the nation. we are exporting in botswana, nigeria, oman, bangladesh, zimbabwe, mauritius, brunei, papua new guinea, guyana, bahamas, bahrain, malaysia, dubai and
