Buy Cable Cutter order online in UK that are used by everyone from construction workers and contractors to amateurs to cut through various types of cables. These are lightweight instruments that are essential for network installers and maintenance workers. Cable cutters are used to make clean cuts in cables without damaging the conductors or insulation. These cutting tools are built of high-quality materials and provide a precise and accurate outcome. These tools are ideal for use in the field or on the production line. Kafton UK offers best quality Cable Cutters in the UK.
TWIN Cord End Crimper is suitable for use with Uninsulated Spade Terminals. It is a professional Crimping Tool Built to be effecient and long-lasting. It is specially designed for durability, comfort and optimum performance. Handles are designed ergonomically so as to improve the Leverage. Buy TWIN Cord End Crimper Range: 0.5 - 16.0mm2 in UK that has slip resistant grips for ease of operartion. Order best Cord End Terminals from Kafton UK.
Ratchet Crimper for Uninsulated Spades is suitable for use with Uninsulated Spade Terminals. It is a professional Crimping Tool Built to be effecient and long-lasting. It is specially designed for durability, comfort and optimum performance. Handles are designed ergonomically so as to improve the Leverage. Buy online Ratchet Crimper For Uninsulated Spades in UK that has slip resistant grips for ease of operartion. Order best Crimping Tools Online from Kafton UK.
The thick knotted cup brush is with a CUP design which is ideal for heavy-duty, aggressive surface conditioning on expansive surface area and also provide more flexibility and avoid scratches on metal surface.
Application
This knotted wire cup brush is used to remove rust, corrosion, paint, spatter, scale as well as clean weld edges, deburring metal and condition the metal surface.
Heavy duty, cleaning of large metal surface, weld scale and corrosion removal.
Ideal for cleaning welds and fabricated steelworks.
Product advantage:
COMPATIBILITY: The wire brush is compatible with all 4-1/2 angle grinders with 5/8 arbor or 11 UNC standard thread.
SAFTY AND RELIABILITY: The wheel brush is made of strengthen steel and large hexagonal threaded arbor to prevent the wire breaking and falling during the process of the heavy work. The ideal design of the wire, diameter, density, length will also provide a superior work life and safety.
Super better balance 2.5g.
Used in semi professional fields
The vane anemometer is a classic wind speed measuring device which is now very commonly used, not only outdoors, but also indoors. Easy handling makes it possible to measure airspeed quickly using the impeller anemometer.
In addition to this, many of the instruments also have features enabling volume flow and temperatures to be recorded. This enables an even easier analysis of the data and their comparison.
When buying a vane anemometer, it is helpful to consider some important features:
measurement of airspeed, volume flow, and temperature
direct recording of the measuring values
possible combination with smartphone App
hold function may be helpful
Rs 11,506.00
14872 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
SGW-810 Light Transmittance and Haze Tester to measure the light transmittance and haze degree
Application
To test the light transmittance and haze degree of all transparent and semi-transparent parallel plane samples (plastic plate, sheets etc), and turbidity or clarity of liquid samples (water, drinks etc), used in the industries of plastics, membrane,
coatings and paints, printing ink, research institute and so on.
The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0-200 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 10 and 100 m/s.
8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg
2 air flow units to select from: m/s, fpm
Integrated density compensation
Backlit display, min/max values, hold function
Rs 51,950.00
FTT-01 Thickness tester employs mechanical scanning method to measure the thickness of plastic films, sheets, board, fabrics, textile,
membranes, paper, foil, wafers and other materials.
Thickness tester complies with below standards:
ASTM D374, ASTM D1777, ISO 4593, ISO 534-2011, ISO 3034, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702, BS 3983, BS 4817
Heat Seal Tester is applied in measuring heat sealability of a surface, or sealant layer of films, laminates, composites and
polymers etc.
How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing
conditions of temperature, time and pressure.
Standard: ASTM F2029
Coefficient of Friction Tester measures the static and kinetic friction coefficient of plastic films, sheets, rubber, paper and paper board, medical device, thread, wires etc.
The COF tester can also be customized for many types of materials as well.
COF Test Standards
MULTIFUNCTIONAL CUTTING DISC: The highest quality cutting wheels. These discs are extremely versatile and can be used in applications ranging from general metal cutting to slicing rebar to cutting angle grinder. GRASSLAND 4 1/2 cut off wheel is made of aluminum oxide grains that are durable and safe. It also provides aggressive cutting action and longer service life. Perfectly compatible with all 4-1/2 inch angle grinders with 7/8 inch(22.2mm) arbor, and thickness 0.047 inch.
THIN WHEEL DESIGN: GRASSLAND cut off wheel has a thin design for fast burr free and precise cutting performance with minimal material loss. The thin technology ensures accuracy and reduces the workload. The tough abrasive cut-off wheels are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper, and all other ferrous metals. The cutoff wheels perform much more aggressive cutting longer, faster, and reliably than other wheels that may shatter or prematurely wear.
SAFE & DURABLE: Our thin grinder wheels offer a premium level of performance and extended wheel life. This GRASSLAND cutting wheel is bonded with aluminum oxide grain, to perform much more aggressive cutting in ferrous metals and stainless with safety and longer service life. During cutting metal applications, safety precautions are necessary to increase efficiency. Our metal cutting disc with solid steel wheel body 100% avoids the risk of shatter and injury for added safety.
VERSATILE APPLICATIONS: GRASSLAND 4.5 cut off wheel for metal is suitable for all kinds of angle grinders. This thin cutting wheel 4 1/2 for angle grinder are designed for hard and continuous use on all metal, fiberglass, iron, plastic, steel, and stainless steel parts. The cutoff wheel 4-1/2 is made to be attached to an angle grinder and can be used to cut steel, stainless steel, fiberglass, plastic irons, and all other ferrous metals for aggressive cutting action.
YOUR SATISFACTION IS GUARANTEED: At Double goats, we understand that you are placing your trust in us to provide you with the highest quality cutting disc products available. Regardless of your finishing application, GRASSLAND Abrasive products can help you get the job done with its full line of high-quality aluminum oxide cut off wheels from a name you can trust. We have 100% confidence in the quality of our products. Not only are our cutting discs made with love, but we go above & beyond with our customer care.
Agasthya 2017 Series Portable Flue Gas Analyzer
BI 100 (O2)
Sensor Technology Electrochemical (EC)
Measurement Gas
O2 0-30% scalable
Response Time (T-90) 30 seconds
Display Keypad LCD Display
Power 80-230 VAC, 50 Hz, Adaptor
Battery Lithium-ion rechargeable batteries
Communication USB
Data Storage Up to 150 set of data
Enclosure Handheld
Operating Temperature 4 to 50C
Dimension 215 (L) x 120 (B) x 40 (H) mm
Area Classification General Purpose
Sampling Probe available as per temp max upto 1400 degC
Probe length : Customised
32-Bit Cortex-M3 ARM Processor
Automatic zeroing when the analyzer is switched ON
Robust/Rugged design that is easy to operate and maintain
Fast warm-up and response
Rechargeable battery operation
Built in sample pump, filter and flowmeter
Condensate removal
Stainless steel probe with sample hose
Battery lifetime up to 8 hours
150 set of data storage
USB for Charging & Data communication
Powerful windows software for Analyzer data communication
Leak Tester is used for the seal integrity checking of packages, containers, bags, pipes that are used in food, beverage,
pharmaceutical, daily chemical, cosmetic and electronic industries, etc
Leak Tester complies with ASTM D3078 and GB/T 15171 standards and could be modified to ASTM F 2054 Bubble Test.
Specifications
PRF 10 Hz to 2000 Hz in 10 Hz increments
Pulse Width Adjustable from 25 ns to 5,000 ns (0.1 MHz) with PerfectSquare technology
Gain 0 to 110 dB
Receiver Bandwidth 0.2 MHz to 26.5 MHz at â??3 dB
System Linearity Horizontal: �± 0.5% FSW
Resolution 0.25% FSH, amplifier accuracy �± 1dB
Reject 0 to 80% FSH with Visual Warning
Amplitude Measurement 0 to 110% full screen height with 0.25% resolution
Automated Calibration Velocity, Zero Offset
Straight Beam (First Backwall or Echo-to-Echo)
Angle Beam (Soundpath or Depth)
Test Modes Pulse Echo, Dual, or Through Transmission
Range 3.36 mm to 13,388 mm (0.132 in. to 527.10 in.) at 5,900 m/s (0.2320 in./�µs)
Velocity 635 m/s to 15240 m/s (0.0250 in./�µs to 0.6000 in./�µs)
Zero Offset 0 to 750 �µs
Refracted Angle 0�° to 90�° in 0.1�° increments
Measurement Gates 2 fully independent gates for amplitude and TOF measurements
Measurements
Gate (1, 2) Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude
Echo-to-Echo Standard Gate 2-Gate 1, Optional IF Gate Tracking
Other measurements Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 A, B, C and D values, Reject Value, Echo to RefdB values
DAC/TCG Standard
DAC points Up to 50 points, 110 dB dynamic range
Special DAC modes Custom DAC (up to 6 curves), 20-80% View
Curved surface correction Standard OD or Bar correction for Angle Beam measurements
- Olympus NORTEC 600D Dual Frequency
- Calibration certificate
- Charger/adaptor
- AC power cord
- Getting Started leaflet
- NORTEC 600D Users Manual and PC interface program on CD-ROM
- Universal PowerLink eddy current probe cable
- MicroSD memory card, 2 GB (1 internal, 1 external)
- USB 2.0 (mini-AB) to PC cable
- 67 watt-hour battery for 600 Series products, 10.8 V, 6.2 Ah, 67 Wh
- AA battery holder for emergency use
- Factory-installed hand strap on left side of NORTEC 600D instrument
- Instrument transport case
- Olympus NEC-8196L Weld Inspection Kit
The textile sub-tube has no bending memory; it does not curl like a PE sub-tube;
The textile sub-tube will not be kinked during laying and can be bent freely during laying;
The textile sub-tube is preset with high-strength draw tape in each hole, and the laying of the cable does not need to be through-hole, and the laying is more convenient and quick;
The construction site requirements are very small, especially suitable for busy districts.
2.Protection cable and outer tube
The breaking strength is above 1000 kg;
Textile tube melting point = 215 C, while HDPE sub-tube = 110 C;
The thermal expansion and contraction rate of the textile tube is 1/7 of that of the HDPE sub-tube;Prevents wear between cables.
3.long lasting
The textile sub-tube has high chemical inertness and can be exposed to a harsh underground environment for a long time. The design life is 30-50 years, and the life of the PE sub-tube is only 15 years.
4.Resolution recognition design
Two holes in the textile sub-tube product family, three holes will be preset with different colors of the draw tape for the differentiation during construction;
The textile sub-tube will print the meter mark when it leaves the factory to prevent unnecessary waste during construction;
When the textile sub-tube is delivered from the factory, it will be labeled according to the customer's needs, such as A, B, C A1, A2, A3, etc., used to distinguish the multiple textile sub-tubes in the pipeline, to facilitate the maintenance of the line.
5.Environmentally friendly design concept
The textile sub-tube can reach 30-50 years underground. Ordinary HDPE sub-tubes will form slag due to aging in the ground for a long time, and become a blockage in the pipeline. The textile sub-tube solves this problem from the design concept and has high environmental protection for the pipeline.
Application
Our fabric innerduct has been successfully installed in a variety of applications including:Broadband, Telecommute, Military, Data Centers, Wireless back-haul, Power/Utilities, Municipalities, Government, University, Healthcare, Airport and� Corporate Campuses.
Fabric Innerduct maximizes the pipeline's network infrastructure while addressing conduit cabling issues, allowing for a variety of cable sizes, reducing or eliminating the number of conduits required in new structures, when overwriting existing cables or traditional internal piping Easily create paths while reducing material and labor costs and increasing installation speed.
Fabric Innerduct is the only flexible fabric innerduct system designed specifically for the network construction industry. The unique fabric construction greatly reducing the wasted space associated with rigid innerduct.
Inflatable type culvert sealing system, which have been widely used in the design of underground culvert constructions in the industries of electric system, telecommunications, port, urban construction, rail transportation and so on. Provide a clean and dry operating environment to cables and other electrical equipment after installation,improve the degree of protection, and reduce the works of cleaning up sludge and stagnant water in the manual well before the maintenance works.
FEATURES
Fast and easy to install, even in congested enclosures.
Very flexible and reliable wraparound sealing system.
Independent of duct or cable ovality.
Wide application cable range with one size.
Seals vacant ducts and ducts with one or more cables.
Can be installed while water is flowing out of the duct.
Water and airtight up to 50 kPa.
Environmentaly friendly and non-toxic.
Resistant to chemicals and bacteria.
Easy and fast removal.
Different sizes are available, sealing a wide variety of ducts and cables.
Application
Our fabric innerduct has been successfully installed in a variety of applications including:
Broadband, Telecom, Military, Data Centers, Wireless backhaul, Power/Utilities, Municipalities, Government, University, Healthcare, Airport and Corporate Campuses.
The culvert without the application of sealing construction will bring the humidity and stagnant water to substation basement, culvert and manual well. In such environment, the corrosions and damages to culvert tray and electrical equipment are unavoidable. The common method is the use of inflatable type culvert sealing product, to stop the water into underground culverts nearby these facilities in a simple and effective way.
Inflatable type culvert sealing system, which have been widely used in the design of underground culvert constructions in the industries of electric system, telecommunications, port, urban construction, rail transportation and so on. Provide a clean and dry operating environment to cables and other electrical equipment after installation, improve the degree of protection, and reduce the works of cleaning up sludge
and stagnant water in the manual well before the maintenance works
Application
1.For power cables.
2.For two or more cables,sealing clips are required.
3.Inflation tool is available to provide.
4.Casters of compressed air or CO2 are COMPATIBLE, or water.
5.Each seal covers a large range of cable and duct diameters.
6.IDSS seals can be installed when water is still flowing out of the duct_saving valuable installation time.
7.Use not only for new cable installations but also for existing applications.
8.IDSS seals can be quickly and easily removed from a duct or pipe by deflation.
air inflatable seals are used to seal cable running in ducts against water and gases. They feature full re usability, sealing of multiple cables without separation clips and durable sealing behaviour (>20 years), reducing total cost of ownership with regards to alternative sealing solutions. Furthermore, they use no CO2 as inflating agent, then protecting our environment.
Reasons for using sealing technology for feedthroughs to protect against water entry or gas diffusion e.g. carbon monoxide
ï?·Prevention of personal injury caused by gas diffusion
ï?·Prevention of damage to property in buildings and technical rooms
ï?·Prevention of short-circuits caused by water entry
ï?·Prevention of network failure caused by optical fibre breakage
(optical fibres are particularly sensitive to water entry or immersion in water)
Cable manhole facilities do not have to be pumped out
Prevention of costly repair and renovation measures
14872 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
