This tester is used to test the bonding strength of decorative bricks, tiles, mosaics, various plates, paints, coatings, exterior wall insulation materials (EPS panels, SPS panels) and also be used to test the bonding strength of various exterior wall building materials and adhesives.
The pressure testing machine is mainly used to measure the compressive strength of building materials such as brick, stone and concrete. Characteristic: 1. Electric and hydraulic load manually, sensor measure the force. 2. The screen display loading speed, breaking peak value, data storage, printing,inquiry and compression strength conversion.
The purpose of the test instrument is to calculate the maximum and minimum of cohesive soil porosity, and used to calculate the relative density, to understand the soil in the state of nature or the elastic after compaction and the stability of soil grain structure.
The Manual Liquid Limit Apparatus (Casagrande) are used to determine the moisture content at which clay soils pass from plastic to liquid state. The devices consist of an adjustable crank and cam mechanism, a blow counter and a removable brass cup fitted on the base. Standards:BS 1377:2/ASTM D4318/AASHTO T89/TS 1900-1 Used to detemine the moisture content at which cleay soils pass from a plastic to a liquid state, I t help in the classification of soil when comparing the potential properties of soil material against empirical data. Comprises: consist of a removable brass cup. adjustable crank,with blow counter and base.
The liquid plastic limit united device adopts optical projection principle, penetration depth is optically amplified. Automatic electrom agnet conedrop; supplied together with cone damage inspecting apparatus. With high precision, easy to operate, no friction and automatically reading.
Technical Specifications: Model OBRK-10 OBRK-30 Max load 10KN 30KN Sample dimension D39.180 mm D39.180 mm, D61.8125 mm Strain rate 0.016-1.6mm/min. six-speed mechanical transmission 0.0024-4.5mm/min. 16-speed mechanical transmission Table stroke Max. 50mm Max. 90mm Confining pressure 0-2Mpa 0-2Mpa Back pressure 0-1.0Mpa 0-1.0Mpa Volume change 0-50ml/0.1ml 0-50ml/0.1ml Hole pressure 0-2Mpa 0-2Mpa Axial displacement 0-30mm 0-30mm Power 220V�±10% 220V�±10% Machine dimension 350x300x1100mm (LxWxH) 500x430x1200mm (LxWxH) Controller Dimension 500x500x925mm (LxWxH) 500x500x925mm (LxWxH) Weight 170KG 180KG
STANDARD: ASTM D3080, BS 1377:7, AASHTO T236 NF P094071-1/2 To determine the shearing strength of the soil using the direct shear apparatus. In many engineering problems such as design of foundation, retaining walls, slab bridges, pipes, sheet piling, the value of the angle of internal friction and cohesion of the soil involved are required for the design. Direct shear test is used to predict these parameters quickly. The laboratory report cover the laboratory procedures for determining these values for cohesionless soils. Strain controlled direct shear machine consists of shear box, soil container, loading unit, proving ring, dial gauge to measure shear deformation and volume changes. A two piece square shear box is one type of soil container used.A proving ring is used to indicate the shear load taken by the soil initiated in the shearing plane.
Standard: ASTM D 6951-03 This portable hand operated equipment is designed to obtain a direct and rapid in-situ evaluation of the structural strength of road pavement layers constructed with unbound materials. The test is performed with continuous penetrations at approx. 800 mm depth with max. depth of 2 m by using extension rods.
Standard :EN 13036-4, EN 1097-8, BS 7976, ASTM E303 The apparatus is suitable for both site and laboratory applications to perform two types of tests. - For measuring pavement (road asphalt) surface frictional and skid resistance properties - For polished stone value tests on aggregates (curved specimens) from accelerated polishing tests. The skid tester is also suitable to perform tests on : - Natural stones conforming to EN 1341, 1342 - Concrete block pavers conforming to EN 1338
Standard: BS 410 1. Material: stainless steel /brass 2. Sieves Diameter: 200mm/300mm/Customize 3. High: 50mm 4. Standard: ISO,EN ,BS,and ASTM sieves
Adjustable vibration intensity, reliable and long lasting, simple sturdy construction, can hold up to 9PCS diameter 300mm sieves. Sieves need extra order.
The vicat frame consists essentially of a metal stand with a sliding rod. An adjustable indicator moves over a graduated scale. The needle or plunger is attached to the bottom end of the rod to make up the test weight of 300 g. The frame is supplied with basic accessories.
It is use for cement mortar mixture fluid test. A specimen contained in a cone mould is placed on a metal surface which is then raised and dropped from a known height after releasing the specimen from the mould. Technical parameter for Standard: EN 459-2, EN 1015-3
Digital Display Anchor Pull out Tester Test Machine is used in all kinds of bolt, steel, expansion bolt anchorage of anchoring force test, the test range, fully meet the latest standard of 6 ~ 12 reinforced drawing requirements, can be used for Rachel reinforcement anchoring force testing. Standard:ASTM C900, BS 1881-207, EN 1542
Used to measure the air content in fresh mix concretetechnical parameters. Configuration: Measuring cylinder, injector, darby, u-shaped tube, tamper, aluminum tube Standard:EN 12350-7, ASTM C231, AASHTO T152
Mini printer can order Separately. Standard: ASTM D1559, D5581, AASTHO T245 Technical Specifications: Model NO. LWD-5 Max. Capacity 50KN Test Rate 50.80mm / min Cross Head Travel 70mm Power 40V/220V,50Hz,400W Net weight 100Kg Packing size 690x420x790mm
It is suitable to make needle penetration determination for highway asphalt, modified asphalt, as well as residue of liquid petroleum asphalt or emulsified asphalt after evaporation. Standard : EN 1426, ASTM D5, AASHTO T49
The standard C0055-M1 unit can measure Static COF (peak) from a resting position and continue to move testing surfaces in a relative motion to give an accurate kinetic COF (dynamic) result. This model features a stationary sled with a moving plane and also comes with the option of a computer software to record data.
Features Capable 212cc Loncin Engine Provides reliable performance under heavy load Emits reduced emissions and is EPA/CARB approved Designed to provide effortless starting in the harshest temperatures Compact 21-Inch Clearing Width Great choice for those with small-mid sized driveways Smaller storage footprint compared to most snowblowers 8" all-steel augers with a 10" 3-blade impeller capable of clearing snowfalls 20" tall Manual 190�° Quick-Turn Chute Allows snow to be thrown up to 36 feet in any direction Whether it's over the fence or on your neighbor's car, you are in complete control Forward & Reverse Speeds Exercise (4) forward speeds depending on your preference Convenient reverse speed allows you to let the machine do the work Heavy treaded tires enhance traction for better maneuverability Reversible Skid Shoes Protects your concrete surfaces from scratches and/or skid marks Double the product life by simply flipping them when worn down Rugged Build The exterior of the snow blower is completely rust-resistant With proper maintenance, this snow thrower will go the distance Clog Removal Tool Included Specifications Engine Engine BrandLoncinEngine Type4-Cycle OHVCC212 CCsStarting SystemRecoilFuel Tank0.95 GallonsTorque9 lbs Auger Housing / Chute Control Auger Diameter8 InchesImpeller Diameter10 InchesProfileSteel 3-BladeAuger MaterialSerrated SteelChute MaterialSteelChute RotationManualTurning Radius190 degreesMax Throwing Distance36 FeetClearing Width21 InchesIntake Height20 Inches Drive System DriveFriction DiscReverse Speeds1 ReverseTire TypeDirectional Snow TreadTire Size13" x 4"Forward Speeds4 Forward Options Interlocking ControlsNoSkid ShoesIncluded - Reversible Overview Weight139 PoundsConsumer Warranty2 YearsProduct Length50 InchesProduct Width22 InchesProduct Height39 InchesPower TypeGasUPC856206004515
Introduction AC transformer ratio tester is an innovative product are mainly applied to change than group test transformer, PT and CT polarity test, test speed, high accuracy. Technical Indicators Working power supply AC220 ±10% 50/60 HZ Instrument weight 3.8 kg Instrument dimension 325 mm L 225 mm W 125 mm H Use of temperature -10-50 Relative humidity 90% No dew Functional Characteristics It has the function of blind measurement, that is, to perform variable ratio and group test when there is no connection between high and low voltage. Based on the test of conventional transformer, Z-type transformer and PT sample, the polarity test function of CT variable ratio is added, and the application field is wider Wide range and high accuracy, the variable ratio measurement range can reach 10,000, and the test accuracy can be guaranteed 0.3% when the maximum value is 10,000. It has perfect protection functions such as reverse connection protection and output short circuit protection.
