EN 143 Automated Filtration Efficiency PFE Tester Mask Testing Machine G506 is used to test the inhalation resistance and exhalation resistance of respirators and masks under certain condition. Usage: Mask Particulate Filtration Efficiency Tester is suitable for fast, accurate and stable detection of particulate filtering efficiency of various medical and daily protective masks, respirators, etc. Standards: GB 19083, GB 2626, GB/T 32610, 42 CFR Part 84 JIS/T 8151 EN 149, EN 12941, EN 14594, NFPA 1972 Multifunctionï¼? 1. This machine can be used for different filter material 2. Customized clamp for different sample size is available 3. Both salt solution and oil solution test can run on this machine Product Usageï¼? The Particulate filtration Efficiency tester is used for performance testing of filter elements, disposable masks, filter media, etc. for respiratory protection products. It's suitable for safety testing of such products, basic filtration performance evaluation and development guidance for new products. It is applicable to the performance verification of new products , quality control of the production department, and the of material properties for the third-party testing organization, the product performance verification laboratory, and the quality and technic al supervisiondepartment, etc.
Relife RL-601M CPU Positioning Tin Planting Kit for Phone A8 - A14. Features: Suitable for Phone 6G/6 Plus/6S/6S plus/7G/7 Plus/8G/8 Plus/X/XS/XS Max/XR/11/11 Pro/11 Pro Max/12/12 Pro/12 Pro Max/12 Mini Precision hole pitch design Imported steel, round and square precise holes, make the tin balls more rounded and prevent the stencil from getting stuck in the tin balls Built-in high-temperature magnet, strong magnetic adsorption, precise positioning, no deviation, high-temperature magnetism unchanged
UYUE 946C preheating station for Mobile Phone repair. UYUE 946C PCB heating platform intelligent digital display heater for PCB SMD heating phone LCD touch screen separating. Warning: 1. The table should be in tidy and the material must be heatproof. 2. When it's working, should be careful to keep away from getting burned. 3. Pay attention to the heating element, high temperature will damage it. 4. Do not use heating plate near the combustible and flammable objects. 5. Do not move the machine until it's power off and cooling down . 6. This machine is high temperature electronic product. In case of any accident happen, remember to cut off the power while not use it. 7. Do not use the machine in high temperature (up to 300 degree) for a long time. Usually, no more than 8h. Notes: 1. Manual measuring, please allow 1 ~ 3mm error,thank you. 2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the picture.
Sunshine 6 in 1 phone motherboard layered heating platform for Phone X-11 Pro Max CPU, SS-T12A M6 desoldering heating station for Phone X mainboard CPU, Phone logic board frame separate repair tools for Phone X XS XS MAX 11 Pro Max Product Features : Silicone non-slip foot pads and cooling holes : Hollow vents and silicone non-slip foot pads are used at the bottom to effectively isolate the temperature, anti-skid and efficient heat dissipation. High hardness thick synthetic stone : The main body is made of special synthetic stone material, high temperature resistance, strong and durable. High purity copper film : Ensure uniform and stable heat transfer and heating, and accurate card positioning. Remove glue from CPU and Other components : Support a variety of chips/universal hard disk/fingerprint cable/CPU degumming and tin removal, accurate card position, non-destructive repair.
Mechanic Heat Kit Intelligent Reflow Soldering Heating Platform with 3.4inch Screen Display for Phone 11 to 13Pro Max Motherboard Repair, Intelligent Desoldering Reflow Degumming Layering Lamination Tin Planting Welding Mobile Phone Curve Heating Tool. Features: 1. Intelligent Desoldering, Reflow, Degumming, Layering, Lamination, Tin Planting, Welding Mobile Phone Curve Heating Tool. 1. 3.4inch Screen Display Monitor temperature changes and realize reflow soldering temperature curve data monitoring. 2. Turbofan blades for heat dissipation, built-in strong wind cooling system. 3. Adopted new MCH ceramic double heating element is adopted, the platform has faster heating, more uniform temperature, and stable performance. 4. 5 professional mode selection, 3 common mode operation. Description: 1. Reflow Soldering Preheating Platform is designed for the original solder of mobile phone motherboard, curve heating, intelligent and safe desoldering and reflow. 2. 5 application scene modes: degumming, layering, lamination, tin planting, and welding. 3. 3 commonly used memory temperatures, automatic recording of the current temperature and manual recording of the current temperature mode. 4. Suits for: Phone X/XS/XS Max/11/11 Pro/11Pro Max/12 Mini/12/12 Pro/12Pro Max/13 Mini/13/13 Pro/13Pro Max
HANGTALK We have electric pruner electric pruning shear cordless pruner cordless pruning shear battery pruner battery pruning shear Sekatory elektryczne Foarfeca electrica Accu Snoeischaar Elektrische snoeischaar Tijera de podar electrica Tesoura de poda electrica Akku Rebschere Akku Astschere Elektrische Gartenschere SARJLI BUDAMA MAKASI Forbici elettriche Forbice da potatura a batteria Baterijske Skarje Foarfece electrice akkukayttoiset oksasakset Tesoura de poda electrica Tesoura Eletrica de Podar Elektricne Skarje PRUNER ELETRICO Baterijske skarje Akku-Gartenschere Akumulatorove nuzky secateur electrique Foarfeca electrica Elektricne skarje za obrezovanje baterijske skarje za obrezovanje Sekator ele
Model number: H151, H2031, H2043, H6045 Product name: Slider Potentiometer Application: Audio, Mixer, Soud Condole Size/ Dimension: 15/20/30/45/60/100 mm Total Resistance: 10/20/50/100/200/250/500 K Resistance taper: 10A, 15A, 1B, 3B, 4B, 15C Residual resistance: Less than 30 Rated Power: 0.2W (Single-unit), 0.1W (Dual-unit) Timing: Shorting or Non-Shorting Center detent: Without/with Operating force: 10-200gf.cm Operating temperature range: -10 to +70 Storage temperature range: -20 to +80 Life Cycles: 10,000 cycles
Model number: H111K Product name: Rotary Potentiometer Application: Household appliance Size/ Dimension: 11mm Resistance range: 500 1M (Tolerance ±20 ) Electrical: Linear taper (B), other tapers Mounting type: PCB mountable Rotation torque: 20-200 gf.cm Rotation speed: 60/1 sec Shaft lengh (mm) : Customized Operating temperature range: -10 to +70 Storage temperature range: -20 to +80 Power rating: 0.05W Max operating voltage: 5 - 15V D.C Insulation resistance: 100 M min at D.C 250 volts. Life Cycles: 15,000 cycles
Model number: H161 Product name: Rotary Potentiometer Application: Household appliance Size/ Dimension: 16mm Resistance range: 500 1M (Tolerance ±20 ) Electrical : Linear taper (B), other tapers Mounting type: PCB mountable, Welding/Soldering Poles: 1-2 Poles Click positions: Center, 11, 21, 41 Click torque: 100-400 gf.cm Shaft stop strengh: 6Kgf.cm Rotation torque: 20-200 gf.cm Total rotation angle: 300�°�±5�° Shaft lengh (mm) Customized Operating temperature range: -10â?? to +70â?? Storage temperature range: -20â?? to +80â?? Rated wattage: 0.125W, 0.06W Rated voltage: 200V AC, 150V AC, Insulation resistance: 00m at 500V DC Life Cycles: 10,000 cycles
Professional Digital Auto Glue Dispenser LY 983A Glue Dropper Solder Paste Liquid Controller Fluid Dispenser Tools Machine. Features: Manual or timer operation modes Foot pedal controlled Suck-back feature ensure no dripping Designed for wide range of application as EFD, I&J Fisnar Complete with an accessory dispensing kit Timer mode dispensing time 0.01-99.99 seconds Timer mode cycle time 0.1-9.9 seconds Manual mode, materials could be dispensed continuously until operator release the foot pedal This unit need to be connected to air compressor (1.5HP or above)
Products Description The pure titanium aerator head for ozone aeration is made of industrial pure titanium powder (purity â?¥ 99.6%) as the main raw material, which is sintered at high temperature and high vacuum. The aeration head is divided into three types: tube type, plate type and spherical type. The spherical type is welded by porous titanium spherical surface and titanium plate, which can be directly connected to the pipe thread. Various interface connection methods can be customized according to the specific needs of customers. The pure titanium aerator head for ozone aeration is widely used in Ozone sterilization for drinking water and reclaimed water reuse, aeration in sewage treatment aeration tanks, and fermentation oxygenation, etc. The aeration bubble diameter of this product is small, the gas-liquid interface diameter is small, the gas-liquid interface area is large, the bubbles diffuse evenly, no hole blockage occurs, and the corrosion resistance is strong. The aerator is an essential equipment for aeration and oxygenation of drainage. Underwater aerators mainly include microporous aerators and jet aerators, which can be divided into surface aerators and underwater aerators according to the method of use. It is suitable for urban sewage, new expansion of large factories and renovation of old aeration tanks, and the aeration tanks can be operated intermittently. The oxygen utilization rate of the aerator head has high power efficiency, large service area, low energy consumption, fine and uniform bubbles, good flow rate and state; no need for repeated flushing, and easy management. Products features 1. Uniform and small pore size; 2. High porosity and large aeration range; 3. High temperature resistance, acid and alkali resistance, oxidation resistance; 4. No particle shedding; 5. Outstanding pressure resistance; 6. Good sealing. Application field 1. Ozone sterilization and aeration of pure water and mineral water; 2. Ozone aeration of industrial wastewater; 3. Domestic sewage treatment aeration; 4. Ozone aeration of petrochemical wastewater. Product specification Spherical type: �?100MM, �?150MM, �?180MM Flat type: �?125MM, �?180MM, �?235MM Tube type: �?20MM, �?30MM, �?40MM, �?50MM, �?60MM Interface: 4 points, 6 points, other special interfaces can be customized
EN 143 Automated Filtration Efficiency PFE Tester Mask Testing Machine G506 is used to test the inhalation resistance and exhalation resistance of respirators and masks under certain condition. Usage: Mask Particulate Filtration Efficiency Tester is suitable for fast, accurate and stable detection of particulate filtering efficiency of various medical and daily protective masks, respirators, etc. Standards: GB 19083, GB 2626, GB/T 32610, 42 CFR Part 84 JIS/T 8151 EN 149, EN 12941, EN 14594, NFPA 1972 Multifunction 1. This machine can be used for different filter material 2. Customized clamp for different sample size is available 3. Both salt solution and oil solution test can run on this machine High Accuracy 1. Support Chinese and English, menu type operating mode and large LCD display, itâ??s easy to switch 2. Two test method available: efficient test and load test 3. Simple, fast and automate operation
Mechanic iT3 Pro intelligent temperature control preheating platform for Phone X-13 PRO Max motherboard layer separating and fitting, Phone Face ID dot projector CPU IC rear camera tin planting BGA desoldering glue removal repair. Mechanic iT3 Pro motherboard layered heating station for Phone X/XS/XS MAX/11/11 PRO/11 PRO MAX/12/12 PRO/12 PRO MAX/12 MINI/13/13 mini/13 Pro/13 Pro Max/Face ID/CPU/IC/Rear camera repair. Features: 1. Suitable for Phone X/XS/XS MAX/11/11PRO/11 PRO MAX/12/12PRO/12 PRO MAX/12 MINI/13/13 mini/13 Pro/13 Pro Max. 2. Used for Phone motherboard layered and fitting, tin planting, BGA desoldering, IC glue removal, dot matrix Face ID repair, rear camera repair. 3. Intelligent adjustable temperature, modular design 4. No air gun and no soldering iron, just plug and use 5. Multiple combination modules, good scalability, easy to expand new modules. 6. Host size: 12*14cm 7. Voltage 110V/220V
Mijing CH5 Intelligent Motherboard Layered Desoldering Platform for Phone X-12 pro max PCB Teardown, MJ CH5 phone Motherboard Preheating Separating Desoldering Tools for Phone X Xs Xs Max 11 11 pro 11 pro max 12 12 pro 12 pro max 12 mini. MJ CH5 Pre-Heating groove for phone X XS XS-MAX MJ CH5-BC Pre-Heating groove for phone 11 11 pro 11 pro max MJ CH5-E Pre-Heating groove for phone 12/12 pro/12 pro max/12 mini Features : Precise positioning, precise temperature, rapid temperature rise, non-slip weight increase, digital display temperature, intelligent 15 minutes sleep, 183 three minutes extreme speed rise, fast stratification, safe disassembly, no damage to the motherboard.
SP-252/M Simplicity Plus 252 Analogue Addressable FACP (Metal Box) 578.00 , MKII-AOP Fyreye MKII Addressable Optical Smoke Detector 28.00 , MKII-AHR Fyreye MKII Addressable Rate of Rise Heat Detector �£28.00, MKII-CB Fyreye MKII Common Base �£ 2.00 , ZT-CP3/AD Zeta Addressable Call Point (New Type) �£ 33.00 , ZTBG-EXD "Explosion Proof Break Glass Unit" �£ 324.00 , MKII-AXTB/R "Addressable Xtratone Sounder Beacon, Red plastic" �£ 55.00 ZTSR/EXD24 Flame Proof Siren (24V DC) �£ 835.00, ZIS-OSD Instrinsically Safe Optical Smoke Detector �£ 216.00, ZIS-PHD Intrinsically Safe Programmable Heat Detector 216.00, ZIS-40 Base for Intrinsically Smoke Detector 11.00, MTL7728 MTL7728 Zener Barrier 345.00,
The GF302D1 three phase portable energy meter test equipment consists of an integrated three phase current source(up to 500V/120A or 500V/20A) and built-in three-phase electronic reference standard of accuracy class 0.05%. Characteristic features of the GF302D1 are its wide measuring range, high accuracy and high tolerance to unwanted external influences. The equipment offers high functionality combined with an excellent menu guided operation via built-in keyboards and colored 7" touch LCD-display. Voltage & current harmonics output from 2 to 63 times. This model portable meter test equipment can be programmable by PC, automatic generation of energy meter error test report.
The GF302D portable meter test equipment is used for grid corporation of measurement and energy test center, management department of power supply bureau, national energy measurement of testing authorities, and also used to test each kind of single/three phase kWh meter of industries and mining enterprises as well as electric meter manufacturers. Meanwhile, the meter test equipment also can be used as one high precision standard power source, voltage source and current source. Portable design, used in the laboratory or on site to auto check energy meter error.
Product Description: We play a key role in providing a broad range of Rapid Chloride Ion Permeability Test Apparatus to our esteemed clients. This collection, which is well regarded for use in a variety of industries and sectors, is produced using only the highest quality raw materials. Additionally, this range is sent to the customer after passing its quality testing in the allotted time frame and is quality tested in accordance with industry standards and regulations. Additionally, our range is available at affordable costs in a variety of customised alternatives based on customer needs. Features: SMART CL1 has the ability to run tests on three samples simultaneously. The power supply unit for this model delivers a constant voltage of 60 V DC while showing the current in milliamperes in each channel on a large, bright digital readout on the front of the unit. The Operator Must Manually Record These Every 30 Meters. This is the model that universities and other institutions choose when simplicity and economy are needed.
Intelligent Polishing Machine for mobile phone screen scratch removing repair. Automatic screen 3D polishing machine with 4 slots for removing scratches on the phone screen, phone back glass and smart watch screen. Intelligent Polishing Machine Mobile Phone Screen Scratch Removal Tool. Features: 1. Wtih Built-in Pump and abrasive Liquid Pipe 2. Water-Mill Injects Water and Polishes 3. Intelligent Air Pressure Steplessly Adjusts Downward Pressure 4. Frequency Conversion Stepless Speed Adjustment 5. Built with Liquid Circulation System 6. Build with the Smartphone-Fixing-Mould (works during polishing). Parameter: 1. Product Name: TBK938 Intelligent Polishing Machine 2. Voltage: AC 220V /110V 3. Power: 1000W 4. Product size: 66 66 83CM 5. Package size : 78 75.5 102CM 6. Net Weight : 117KG 7. packaging 140KG Package list: 1x machine 2x Double mode aluminum plate(total 4 slots) 1x Sanding blanker 1x Waterproof glue 1x Grinding powder 6x Moulds 1x Hexagon wrench
M860 WiFi+Bluetooth Cloud Intelligent Precision Cutting Machine AI Hydrogel Film for Phone Watch iPad Front Glass Back Cover Films Cutting. Features: 1. MORE THAN BEAUTY BETTER QUALITY: 1).AUTOMATIC FILM FEEDING 2).WIFI+BLUETOOTH 3).CLOUD DATA 4).15 LANGUAGES 5).QUIET AND NO NOISE 2. WIDE APPLICATION FILM CUTTING MACHINE: Suitable for front/rear films of mobile phones watches, Airpods, cameras, iPad, etc. 3. 30S FAST CUTTING QUIET AND NO NOISEï¼? Equipped with an automatic sensor no need to worry about filming problems at all, Cutting accuracy to 0.01 mm 4. WIFI+BLUETOOTH DUAL SMART OPERATION: It can connect WiFi,touch screen to operate independently can connect Application with mobile phone Bluetooth to operate. 5. MALL IN SIZE SILENT AND NO NOISE: Intelligent film cutting machine-M860 smaller and lighter than previous one More accurate, and convenient 6.REAR MEMBRANE PICTURE: 1). Machine input, computer IP transmission support printer DIY pictures. 2). Various models of mobile phones/computers watches/ game consoles, etc. Complete real-time data updates. Specification: Working environment temperature: -5~45 Voltage: 110V-240v Cutting accuracy: 0.1mm Speed: 300-600mm/S Maximum material width into the machine: 180mm Maximum material depth into the machine: 120mm Cutting pressure: 30-90 digital gear (corresponding pressure 150-450g) Data transmission method: comes with cloud service output, no registration required Advantages: Large touch screen display, comes with 15 languages.
