Products Parameter
Type:DTC-F1212
Max. Product Size: 2500í-1200í-1000(mm)
Cutting Line:1.0~1.5¬L
Control System:Industrial Computer
Cutting Speed:0~6m/min
Precision:í+1¬L
Power:<5.5kw
Weight:1200kg
Products Introduce
The D&T Fast wire Contour Cutter is a versatile machine, which uses an abrasive wire moving at high-speed to enable it to cut complex 2D shapes from a wide range of rigid and flexible foams. These include flexible and rigid PU, EPS, PE, PVC, EVA, Rock wool and phenol foams. All the machines are driven by the remarkable D&T Profiler software, which speeds up the design process and enables the operator to obtain the best yield from the foam block. Fast Wire Contour Cutter has perfect safe system to provide the accident. It include: All Motor will stop when the safety door be opened; Exigency button on both machine and control box for accident; brake system when cutting line broken.
The machine can be produced by customerí»s requirement.
Products introduce
Suit for: polystyrene cutting line: how wire d&t series hot wire contour cuter is a special cutting machine which for complex shape product of eps. This kind of cutter has one or several cutting lines for different production request. All the machines are driven by the remarkable d&t profiler software, which speeds up the design process and enables the operator to obtain the best yield from the foam block. Hot wire contour cutter has perfect safe system to provide the accident. It include: all motor will stop when the safety door be opened; exigency button on both machine and control box for accident.
Products introduce
This cutter adopts the advanced frequency conversion system. Automatic number controlled. It is operation is handy and cutting is exact.This machine is suitable to cut horizontal sheet for several sponge once. It control by digital system, and frequency conversion system
The machine can be produced by customerí»s requirement.
Products introduce
Suit for: sponge, flexible pu cutting line: high speed, toothed blade. The d&t oscillating blade contour cutter is a kind of complex shape cutter which suitable flexible foam. The blade cut with high speed vibrating, resulting it will work faster and the product will be smoother. Specially, no dust when you use oscillating blade contour cutter to cut flexible pu. All the machines are driven by the remarkable d&t profiler software, which speeds up the design process and enables the operator to obtain the best yield from the foam block. Oscillating blade contour cutter has perfect safe system to provide the accident. It include: all motor will stop when the safety door be opened; exigency button on both machine and control box for accident; brake system when cutting line broken.
.
14875 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
1. Vx153 tacker is heavy duty and can be fired out with recoilless.
2. Actually itf¬s 3 in 1 tacker, professional used with staples, brad nails and pin in various lengths from 6 to 16mm.
3. Have normal-max (-, +) impact feature with staple depth control knob.
3. The unique inside mechanism is we have f¦three leaf of spring platesf+ so it can powerfully discharge the staples even too 16mm.
4. It equipped with the quick-load staple chamber f¦drawer magazinef+, you can simply operate from previous usage place staples to remove the jammed staples by pull backward the staple pusher. The difference from the traditional staple pusher is vx153 own the drawer staple chamber and parts wonf¬t isolate from chamber.
5. Vx153 applied the patents for outline shape design and safety locking device of handle. Easily unlock/lock operation without lock ring.
6. In view of the usage of lifetime is much longer, it professionalizes on maximize performance with staples, brad nails and pin.
Features
l For flat wire staples 6-14mm, 7.6mm cable staples
10-14mm, brad nails 10-14mm and pin 14mm.
l Durable all-steel construction
l Heavy duty for multi-purpose use
Quick jam release button
Impact power adjustment
Big caliber grip for comfort operation and easy squeeze
wire roller ú¦The wire roller (DL series) is the commonly used component for the wire passing, and it is used in the wire passing position of the coil winding machine and the textile machinery as well.
The porcelain ring is trapped out of the bearing, it will rotate by the thread and wire passing on the surface of the ring. Thus the sliding friction has been converted to the static friction. But at the start and stop, in order to overcome the inertia, there will be a partial sliding friction.
The difference between the usage of wire roller and ceramic ring is: there is a sliding friction between thread, wire and the surface of the ceramic ring, so it is applied for the smaller angle of the wire, lower pressure and other such kind of less demanding occasions. The wire roller is mainly used of static friction (part sliding friction); it is applied for the bigger angle of the wire, a certain pressure and other such kind of higher occasions. Recently, as improved processing technology, ceramic rings can also be used for important occasions, further illustration will be provided when orders.
The surface polish degree of the porcelain ring reaches Ra0.2; the beating during rotation is under 0.15. We select the 99% AL2O3 as the material with the hardness of HRa88 and the density of 3.85.
There are three types of the wire roller---wire roller (DL series), ceramic roller (NT-2 series) and the wire jump preventer (NT series). Two nylon sidewalls have been put to the both side of the ceramic ring and the bearing, it combines one wire roller. Two ceramic sidewalls have been put to the both side of the ceramic ring and bearing, there is a reverse hook or a ball to prevent the thread jumping out above the ring. The roller which is without the ceramic sidewalls is called ceramic roller.
wire roller ú¦The wire roller (DL series) is the commonly used component for the wire passing, and it is used in the wire passing position of the coil winding machine and the textile machinery as well.
The porcelain ring is trapped out of the bearing, it will rotate by the thread and wire passing on the surface of the ring. Thus the sliding friction has been converted to the static friction. But at the start and stop, in order to overcome the inertia, there will be a partial sliding friction.
The difference between the usage of wire roller and ceramic ring is: there is a sliding friction between thread, wire and the surface of the ceramic ring, so it is applied for the smaller angle of the wire, lower pressure and other such kind of less demanding occasions. The wire roller is mainly used of static friction (part sliding friction); it is applied for the bigger angle of the wire, a certain pressure and other such kind of higher occasions. Recently, as improved processing technology, ceramic rings can also be used for important occasions, further illustration will be provided when orders.
The surface polish degree of the porcelain ring reaches Ra0.2; the beating during rotation is under 0.15. We select the 99% AL2O3 as the material with the hardness of HRa88 and the density of 3.85.
There are three types of the wire roller---wire roller (DL series), ceramic roller (NT-2 series) and the wire jump preventer (NT series). Two nylon sidewalls have been put to the both side of the ceramic ring and the bearing, it combines one wire roller. Two ceramic sidewalls have been put to the both side of the ceramic ring and bearing, there is a reverse hook or a ball to prevent the thread jumping out above the ring. The roller which is without the ceramic sidewalls is called ceramic roller.
ruby nozzle ú¦This product is assembled by the stainless steel main part and the processed stones. It has been widely used in various types of CNC automatic winding machine.The nozzle is installed at the end of the mechanical hand of the winding machine, the enameled wire will go through it and do the winding job under the guidance of its processing. It is not only the indispensable component of the winding machine, but also the key components which are used for ensure the quality of processed products. The main function of the nozzle is the protection of the enameled wire insulation layer.
The ruby material has the characteristics of extremely hard and wear-resistant, we do the precision grinding and polishing by using sophisticated equipment under these characteristics, coupled with advanced technology, the roughness of bore, surface and R place will be reached over Ra0.025, therefore the rate of damage will be extremely low. We do the fine mosaic with the good toughness characteristics of the stainless steel.
Advantages: good toughness, low friction coefficient of the ruby head, long life.
Apply: applicable to fine coil and coil processing of thread .
Processing Limit: d1 í¦ 0.2 mm
D1 í¦ 0.7 mm
ruby nozzle ú¦This product is assembled by the stainless steel main part and the processed stones. It has been widely used in various types of CNC automatic winding machine.The nozzle is installed at the end of the mechanical hand of the winding machine, the enameled wire will go through it and do the winding job under the guidance of its processing. It is not only the indispensable component of the winding machine, but also the key components which are used for ensure the quality of processed products. The main function of the nozzle is the protection of the enameled wire insulation layer.
The ruby material has the characteristics of extremely hard and wear-resistant, we do the precision grinding and polishing by using sophisticated equipment under these characteristics, coupled with advanced technology, the roughness of bore, surface and R place will be reached over Ra0.025, therefore the rate of damage will be extremely low. We do the fine mosaic with the good toughness characteristics of the stainless steel.
Advantages: good toughness, low friction coefficient of the ruby head, long life.
Apply: applicable to fine coil and coil processing of thread .
Processing Limit: d1 í¦ 0.2 mm
D1 í¦ 0.7 mm
Tungsten carbide nozzle ú¦this product is made by the precision machining with the tungsten carbide materials (superhard alloy). The hardness reached over hra90 degree while the anti-bending degree reached over 2300n/mm. We do the precision grinding and surface treatment to achieve ra0.1 of the bore roughness and the ra0.025 of the r place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Advantages: high hardness, rigid and impact resistance.
Tungsten carbide nozzle ú¦this product is made by the precision machining with the tungsten carbide materials (superhard alloy). The hardness reached over hra90 degree while the anti-bending degree reached over 2300n/mm. We do the precision grinding and surface treatment to achieve ra0.1 of the bore roughness and the ra0.025 of the r place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle.
Advantages: high hardness, rigid and impact resistance.
Dia. 4.0-30.0mm, total length: 110-1000mm
Fits hammer drills with sds-plus chucking and 2-slot chucking system. It can be used with electric hammer of bosch co., aeg. Co., black & decker co., hilti co., phillips co., hitachi co., and makita co., the shank is round with dual-arc and dual-key way.
Material application chart
Finish range of applications details
Black oxidethin sheet metal
135¡ãsplit-point is for quick penetration and reducedwalking
Popular for pop rivet drilling applications
Use for drilling any thin sheet metal
The wire jump preventer (wire roller-nt series) is used for a radical change of direction and adequate guidance and prevent the wire jumping during the winding process. The precision ceramics circle inside has an ultra-fine polishing degree ra0.2. There is a high-speed bearing in this porcelain circle which can control the sliding distance between enameled wire and the circle under 0.2mm, protect the film and assure the beating of the enameled wire in a very small scope to stabilized the tension.
