Max. Torque: 30 ft-lb (40 Nm) Free speed: 240 rpm. Weight: 1.14 lb (0.52 kg) Length: 6-1/2" (165 mm) Front Exhaust
GBJ-Series Steel Bottle Jacks. Low handle effort. Automatic bypass port to prevent over-extension. Wiper seal for extended life. Chrome plating on both plungers. Safety relief valve to prevent overload. Fully servicable. Cast pump linkage. Cast beam. Handle included on all models.
Compact and ergonomic design, easy to use. Unique angled head design. Single-acting, spring return cylinder. Heavy duty chisels can be reground. Maximum allowable Hardness of Split 44 HRC. Tool suitable for SAE grade 2H Nuts.
Compact and ergonomic design, easy to use. Unique angled head design. No thread damage to bolts or studs. Single-acting, spring return cylinder. Chisels have been designed with three cutting edges for maximum life. Maximum allowable Hardness of Split 44 HRC. Tool suitable for SAE grade 2H nuts. Maximum tool operating pressure 1500 bar.
For maintenance, commissioning, shutdowns, testing and valve change outs. No need for hammers, chisels, slings or chain blocks. Requires very small access gap of only 6 mm. Both mechanical and hydraulic are available.
Compact and ergonomic design, easy to use. Adjustable jaw widths from 70 mm to 216 mm for a wide range of applications. Single-acting, spring return cylinders for fast trouble-free operation.
Compact and reliable. Reduce the damage of the seals result from mishandling. One specification can suit various specifications of bolts. A groove is visible as the maximum piston extension is reached. Ability to link number of tensioners together. Detachable and interchangeable bridge components. Maximum tool operating pressure 1500 bar. Can match hand pump, electric pump.
Convertible model of 3 Arm / 2 Arm on 5 & 10 ton model. Claws are forged of high-strength alloy steel. One set pullers include hand pump, hydraulic hose, pressure gauge, gauge adaptor.
Precise hydraulic control allows fast, efficient and safe pulling. High quality, forged steel components provide superior reliability and service. Available with and without full hydraulic set.
Max. torque: 1,100 ft-lb (1496 Nm) Free Speed: 5,500 rpm. Weight: 12.27 lb (5.6 kg) Length: 8-43/64" (220 mm) Handle Exhaust Twin Hammer mechanism.
Max. Torque: 1,800 ft-lb (2,439 Nm) Free speed: 3,500 rpm. Weight: 18.2 lb (8.25 kg) Length: 11" (278 mm) Handle Exhaust Twin Hammer mechanism.
Max. Torque: 1,800 ft-lb (2,439 Nm) Free speed: 4,000 rpm. Weight: 23.6 lb (10.61 kg) Length: 21-1/8" (536 mm) Side Exhaust Twin Hammer mechanism.
Max. Torque: 74 ft-lb (100 Nm) Free speed: 160 rpm. Weight: 2.64 lb (1.2 kg) Length: 9" (230 mm) Rear Exhaust
Max Torque: 220 ft-lb(298 Nm) Free speed: 10,000 rpm. Weight: 3.3 lb (1.5 Kg) Length 6-1/8" (155 mm) Handle Exhaust Pin clutch mechanism
Max Torque: 450 ft-lb (612 Nm) Free Speed: 7,000 rpm. Weight: 6 lb (2.7 Kg). Length: 7-1/4 (184 mm) Handle Exhaust Twin hammer mechanism.
GRIPHOLD® make, Heavy Duty, Crow Foot Wrench, in 3/4 sq. drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Crow Foot Wrench, in 1/2 sq. drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
-> Forged Steel Jaws and Handle for maximum strength. -> Good quality flat link chain for good grip of pipe.
These special spanners have been developed for tightening and opening of Gear Case Bolts of the Electric Locomotives. These special spanners have the following salient features: 1. The Spanners are with Ratchet Pawl Mechanisms. 2. The Spanners can be used to open and tighten the bolt with the help of Reverse and Forward Mechanism of the Ratchet System by changing the position of the pawl. 3. The Spanners are bi-hexagonal for easy gripping of the bolt head and both side open to facilitate working from both sides. 4. The body has been designed to suit the easy operationof the tool at the specified location. 5. Components of the tool have been hardened and tempered to ensure wear resistance and long life. 6. All components are made from chrome vanadium steel. 7. The spanners have been tested satisfactorily at a load of 200 Kgf. M.
-> GRIPHOLD heavy-duty tool box is made from compressed steel sheet of 18/20 gauges, painted in red, auto enamelled and oven baked. -> It has small compartments and a tote tray. -> The tool box has welded construction with a spot welded sturdy single handle across its length, for easy handling. -> The lid is fitted with full piano type hinges, which are closely spot-welded. -> The tool box is supplied with a sturdy padlock.
