Technical Specifications: Model OBRK-10 OBRK-30 Max load 10KN 30KN Sample dimension D39.180 mm D39.180 mm, D61.8125 mm Strain rate 0.016-1.6mm/min. six-speed mechanical transmission 0.0024-4.5mm/min. 16-speed mechanical transmission Table stroke Max. 50mm Max. 90mm Confining pressure 0-2Mpa 0-2Mpa Back pressure 0-1.0Mpa 0-1.0Mpa Volume change 0-50ml/0.1ml 0-50ml/0.1ml Hole pressure 0-2Mpa 0-2Mpa Axial displacement 0-30mm 0-30mm Power 220V�±10% 220V�±10% Machine dimension 350x300x1100mm (LxWxH) 500x430x1200mm (LxWxH) Controller Dimension 500x500x925mm (LxWxH) 500x500x925mm (LxWxH) Weight 170KG 180KG
STANDARD: ASTM D3080, BS 1377:7, AASHTO T236 NF P094071-1/2 To determine the shearing strength of the soil using the direct shear apparatus. In many engineering problems such as design of foundation, retaining walls, slab bridges, pipes, sheet piling, the value of the angle of internal friction and cohesion of the soil involved are required for the design. Direct shear test is used to predict these parameters quickly. The laboratory report cover the laboratory procedures for determining these values for cohesionless soils. Strain controlled direct shear machine consists of shear box, soil container, loading unit, proving ring, dial gauge to measure shear deformation and volume changes. A two piece square shear box is one type of soil container used.A proving ring is used to indicate the shear load taken by the soil initiated in the shearing plane.
Standard: ASTM D 6951-03 This portable hand operated equipment is designed to obtain a direct and rapid in-situ evaluation of the structural strength of road pavement layers constructed with unbound materials. The test is performed with continuous penetrations at approx. 800 mm depth with max. depth of 2 m by using extension rods.
Standard :EN 13036-4, EN 1097-8, BS 7976, ASTM E303 The apparatus is suitable for both site and laboratory applications to perform two types of tests. - For measuring pavement (road asphalt) surface frictional and skid resistance properties - For polished stone value tests on aggregates (curved specimens) from accelerated polishing tests. The skid tester is also suitable to perform tests on : - Natural stones conforming to EN 1341, 1342 - Concrete block pavers conforming to EN 1338
Standard: BS 410 1. Material: stainless steel /brass 2. Sieves Diameter: 200mm/300mm/Customize 3. High: 50mm 4. Standard: ISO,EN ,BS,and ASTM sieves
Adjustable vibration intensity, reliable and long lasting, simple sturdy construction, can hold up to 9PCS diameter 300mm sieves. Sieves need extra order.
The vicat frame consists essentially of a metal stand with a sliding rod. An adjustable indicator moves over a graduated scale. The needle or plunger is attached to the bottom end of the rod to make up the test weight of 300 g. The frame is supplied with basic accessories.
It is use for cement mortar mixture fluid test. A specimen contained in a cone mould is placed on a metal surface which is then raised and dropped from a known height after releasing the specimen from the mould. Technical parameter for Standard: EN 459-2, EN 1015-3
Digital Display Anchor Pull out Tester Test Machine is used in all kinds of bolt, steel, expansion bolt anchorage of anchoring force test, the test range, fully meet the latest standard of 6 ~ 12 reinforced drawing requirements, can be used for Rachel reinforcement anchoring force testing. Standard:ASTM C900, BS 1881-207, EN 1542
Used to measure the air content in fresh mix concretetechnical parameters. Configuration: Measuring cylinder, injector, darby, u-shaped tube, tamper, aluminum tube Standard:EN 12350-7, ASTM C231, AASHTO T152
Mini printer can order Separately. Standard: ASTM D1559, D5581, AASTHO T245 Technical Specifications: Model NO. LWD-5 Max. Capacity 50KN Test Rate 50.80mm / min Cross Head Travel 70mm Power 40V/220V,50Hz,400W Net weight 100Kg Packing size 690x420x790mm
It is suitable to make needle penetration determination for highway asphalt, modified asphalt, as well as residue of liquid petroleum asphalt or emulsified asphalt after evaporation. Standard : EN 1426, ASTM D5, AASHTO T49
The standard C0055-M1 unit can measure Static COF (peak) from a resting position and continue to move testing surfaces in a relative motion to give an accurate kinetic COF (dynamic) result. This model features a stationary sled with a moving plane and also comes with the option of a computer software to record data.
Features Capable 212cc Loncin Engine Provides reliable performance under heavy load Emits reduced emissions and is EPA/CARB approved Designed to provide effortless starting in the harshest temperatures Compact 21-Inch Clearing Width Great choice for those with small-mid sized driveways Smaller storage footprint compared to most snowblowers 8" all-steel augers with a 10" 3-blade impeller capable of clearing snowfalls 20" tall Manual 190�° Quick-Turn Chute Allows snow to be thrown up to 36 feet in any direction Whether it's over the fence or on your neighbor's car, you are in complete control Forward & Reverse Speeds Exercise (4) forward speeds depending on your preference Convenient reverse speed allows you to let the machine do the work Heavy treaded tires enhance traction for better maneuverability Reversible Skid Shoes Protects your concrete surfaces from scratches and/or skid marks Double the product life by simply flipping them when worn down Rugged Build The exterior of the snow blower is completely rust-resistant With proper maintenance, this snow thrower will go the distance Clog Removal Tool Included Specifications Engine Engine BrandLoncinEngine Type4-Cycle OHVCC212 CCsStarting SystemRecoilFuel Tank0.95 GallonsTorque9 lbs Auger Housing / Chute Control Auger Diameter8 InchesImpeller Diameter10 InchesProfileSteel 3-BladeAuger MaterialSerrated SteelChute MaterialSteelChute RotationManualTurning Radius190 degreesMax Throwing Distance36 FeetClearing Width21 InchesIntake Height20 Inches Drive System DriveFriction DiscReverse Speeds1 ReverseTire TypeDirectional Snow TreadTire Size13" x 4"Forward Speeds4 Forward Options Interlocking ControlsNoSkid ShoesIncluded - Reversible Overview Weight139 PoundsConsumer Warranty2 YearsProduct Length50 InchesProduct Width22 InchesProduct Height39 InchesPower TypeGasUPC856206004515
Introduction AC transformer ratio tester is an innovative product are mainly applied to change than group test transformer, PT and CT polarity test, test speed, high accuracy. Technical Indicators Working power supply AC220 ±10% 50/60 HZ Instrument weight 3.8 kg Instrument dimension 325 mm L 225 mm W 125 mm H Use of temperature -10-50 Relative humidity 90% No dew Functional Characteristics It has the function of blind measurement, that is, to perform variable ratio and group test when there is no connection between high and low voltage. Based on the test of conventional transformer, Z-type transformer and PT sample, the polarity test function of CT variable ratio is added, and the application field is wider Wide range and high accuracy, the variable ratio measurement range can reach 10,000, and the test accuracy can be guaranteed 0.3% when the maximum value is 10,000. It has perfect protection functions such as reverse connection protection and output short circuit protection.
JX-270MT Specifications: Adaptor Input AC 100V ~ 240 V (50 ~60 ) Hz Output DC 12 V, 2A Power DC12V, 15W Applicable Fiber Diameter 125�µm Applicable Cable Diameter 250�µm , 900 �µm Fiber quantity Single core to 12 fibers Stripped Length 32.0mm Heating Time 2s.4s .6s.8s. Temp. Setting Step 4 Steps Stripping Temperature (HEATING TYPE) 80�°C~110�°C (Adjustable every10�°C ) Stripped Tensile Strength 4 Kg Dimension 165(L) X 58(D) X 71(H) mm Weight 750g Environmental requirements Humidity below 65% %
Cable Slitter for Armored& Heavy-Duty Cable~KJ-01 Overview Professional-grade tool ideal for slitting the armor layer on fiber feeder, central tube & stranded loose tube fiber optic cables, as well as various other non-fiber armored cables Versatile design features a guide wheel for stability to accurately slit the outer polyethylene jacket & armor in one step Performs longitudinal slitting & circumferential (ringing) stripping on cable ends Optional red guide wheel allows the ACS model to accommodate smaller cable diameters Compatibility Cable Access: End Min. Cable Outer Diameter: 0.315 (8 mm) Max. Cable Outer Diameter: 1.125 (28.6 mm) Adjustable Blade Depth: Up to 0.22 (5.5 mm) Cable Material: Armored Corrugated Copper, Armored Steel, Armored Aluminum Specifications: Guide Wheel: 37879 Guide Wheel Color Gold Length: 5 (127 mm) Weight: 10 oz(284g) Replacement Blade Part#: 37884
As a manufacturer and a supplier we produce cementing tools since 1997, and now we have almost 400 workers, the products cover cementing head/plug, stage collar, float equipment, centralizer and so on. Please contact me if you have need, and
Drag chain is suitable for the CNC machine tools, machining centers, automated machinery and production lines and other kinds of machine tools, robots, transport machinery, measuring instruments, handling device and other liquid drive controlas a wire, cable, gas hose protection device, can take on machine tools, machinery and equipment moving parts run harmoniously, can play a safety protection and the ability to guide, can prolong protected wire, cable, liquid, hydraulic hose service life and reduce consumption, can greatly improve the machine tools, machinery and equipment of wire, cable, liquid, gas hose to confirm the unorderly situation existing in distribution, make it tidy and rules is arranged together, can enhance the overall artistic effect of machine tools. Product diversification for your choice Factory sale directly with professional sale team For Best price High quality and favorable service Express service for some urgent delivery orders to meet customer request
Product Introduction: The handheld SF6 gas leak detector is a stable and sensitive leak detector. We have fully considered the actual needs of the majority of users, and at the same time apply our rich technology and experience to this product, allowing users to enjoy an excellent price-performance ratio. The high-tech central microprocessor unit is the core of the qualitative leak detector for sulfur hexafluoride gas. Its digital signal processing capabilities can better manage circuits and process detection signals. Due to the use of a large number of integrated circuits, the number of components in the circuit is reduced by 40%, which greatly improves reliability and efficiency. The microprocessor can monitor the probe and battery voltage at a rate of 4000 times per second. Even the smallest signal can be captured. It can work stably and reliably in any environment. The SF6 gas qualitative leak detector has added some convenient functions. Seven-level sensitivity, the sensitivity is increased by 64 times. The three-color LED gradually indicates the degree of leakage in a large range, and is also used to display the sensitivity level and battery power. Touch the keyboard to perform all operations. The avant-garde slender shape design greatly facilitates the user's use and maintenance. It is very convenient to use the indicator light in the direct range.
