This is the vertical closed-loop geothermal system and this method makes depth of ground heat exchanger installation up to 300m or more compared to existing technology. Thus, this can improve economic feasibility as increasing heat efficiency. There are 4 characteristics of this product, 1) Install weigh band and weight added device on the exterior and lower part of the geothermal coil pipe to increase the weight per unit and this can solve buoyancy problems. 2) It has various types of geothermal coil pipe (i.e. 2,4) and expand the diameter of geothermal coil pipe to improve heat exchange rate. 3) The manhole and leakage sensor are installed for maintenance and inspection on the ground burial area 4) Install the smart tag on geothermal boreholes and ground pipe by using internet of things (loT) technology to know accurate location of geothermal boreholes.
This is the subsidence prevention geothermal system and the water distribution pipe is installed in the geothermal boreholes to enable the normal looping of the cyclic water at the time of geothermal boreholes subsidence for the stable geothermal system operation. There are 3 characteristics of this product, 1) Install the recycling water pipe to prevent geothermal boreholes subsidence. 2) Install the filler in between the inside casing and excavation hole to increase heat conductivity rate 3) Create the geothermal boreholes on the lowest part by securing the grouting zone to have no interval even when the inside casing joint part is deviated.
Our scrubber systems utilizes carbonated water instead of the existing H2SO4 method which can be hazardous. The CO2 gas is made into nano-micro sized bubbles using a CO2 bubble nozzle and a pressurized tank, and the bubble-form CO2 acts as a neutralizer for the NH3. Also our FM qualified (FM 4910, 4922) scubbers are made out of high-corrosion resistant, nonflammable material. Also, a smart AI based fault detection system is acquired to the fans, enabling prediction of the fan's lifespan.
It contains a dial adjuster for adjusting the blade pressure based on the thickness of the insulation/wire. Buy online Unitstrippers, Auto Cable Strippers Range: 0.25-6.0mm² in UK that contains a self-adjusting mechanism that allows for effective wire stripping without injuring the conductor or inner core. Kafton UK offers best Cable Cutters.
Buy Cable Cutter order online in UK that are used by everyone from construction workers and contractors to amateurs to cut through various types of cables. These are lightweight instruments that are essential for network installers and maintenance workers. Cable cutters are used to make clean cuts in cables without damaging the conductors or insulation. These cutting tools are built of high-quality materials and provide a precise and accurate outcome. These tools are ideal for use in the field or on the production line. Kafton UK offers best quality Cable Cutters in the UK.
TWIN Cord End Crimper is suitable for use with Uninsulated Spade Terminals. It is a professional Crimping Tool Built to be effecient and long-lasting. It is specially designed for durability, comfort and optimum performance. Handles are designed ergonomically so as to improve the Leverage. Buy TWIN Cord End Crimper Range: 0.5 - 16.0mm2 in UK that has slip resistant grips for ease of operartion. Order best Cord End Terminals from Kafton UK.
Ratchet Crimper for Uninsulated Spades is suitable for use with Uninsulated Spade Terminals. It is a professional Crimping Tool Built to be effecient and long-lasting. It is specially designed for durability, comfort and optimum performance. Handles are designed ergonomically so as to improve the Leverage. Buy online Ratchet Crimper For Uninsulated Spades in UK that has slip resistant grips for ease of operartion. Order best Crimping Tools Online from Kafton UK.
Features: The thick knotted cup brush is with a CUP design which is ideal for heavy-duty, aggressive surface conditioning on expansive surface area and also provide more flexibility and avoid scratches on metal surface. Application This knotted wire cup brush is used to remove rust, corrosion, paint, spatter, scale as well as clean weld edges, deburring metal and condition the metal surface. Heavy duty, cleaning of large metal surface, weld scale and corrosion removal. Ideal for cleaning welds and fabricated steelworks. Product advantage: COMPATIBILITY: The wire brush is compatible with all 4-1/2 angle grinders with 5/8 arbor or 11 UNC standard thread. SAFTY AND RELIABILITY: The wheel brush is made of strengthen steel and large hexagonal threaded arbor to prevent the wire breaking and falling during the process of the heavy work. The ideal design of the wire, diameter, density, length will also provide a superior work life and safety. Super better balance 2.5g. Used in semi professional fields
The vane anemometer is a classic wind speed measuring device which is now very commonly used, not only outdoors, but also indoors. Easy handling makes it possible to measure airspeed quickly using the impeller anemometer. In addition to this, many of the instruments also have features enabling volume flow and temperatures to be recorded. This enables an even easier analysis of the data and their comparison. When buying a vane anemometer, it is helpful to consider some important features: measurement of airspeed, volume flow, and temperature direct recording of the measuring values possible combination with smartphone App hold function may be helpful Rs 11,506.00
SGW-810 Light Transmittance and Haze Tester to measure the light transmittance and haze degree Application To test the light transmittance and haze degree of all transparent and semi-transparent parallel plane samples (plastic plate, sheets etc), and turbidity or clarity of liquid samples (water, drinks etc), used in the industries of plastics, membrane, coatings and paints, printing ink, research institute and so on.
The testo 512 differential pressure meter is available as four different models. This model has a measuring range from 0-200 hPa and is ideal for measuring pressure differences at filters and for carrying out pitot static tube measurements in air ducts at air flow speeds between 10 and 100 m/s. 8 measurement units to choose from: psi, kPa, hPa, Pa, mm H2O, mmHg, inch H2O, inch Hg 2 air flow units to select from: m/s, fpm Integrated density compensation Backlit display, min/max values, hold function Rs 51,950.00
FTT-01 Thickness tester employs mechanical scanning method to measure the thickness of plastic films, sheets, board, fabrics, textile, membranes, paper, foil, wafers and other materials. Thickness tester complies with below standards: ASTM D374, ASTM D1777, ISO 4593, ISO 534-2011, ISO 3034, TAPPI T411, JIS K6250, JIS K6783, JIS Z1702, BS 3983, BS 4817
Heat Seal Tester is applied in measuring heat sealability of a surface, or sealant layer of films, laminates, composites and polymers etc. How well the material heat seals is expressed quantitatively as seal strength as a function of the sealing conditions of temperature, time and pressure. Standard: ASTM F2029
Coefficient of Friction Tester measures the static and kinetic friction coefficient of plastic films, sheets, rubber, paper and paper board, medical device, thread, wires etc. The COF tester can also be customized for many types of materials as well. COF Test Standards ASTM D1894, ISO 8295, TAPPI T816, GB10006
MULTIFUNCTIONAL CUTTING DISC: The highest quality cutting wheels. These discs are extremely versatile and can be used in applications ranging from general metal cutting to slicing rebar to cutting angle grinder. GRASSLAND 4 1/2 cut off wheel is made of aluminum oxide grains that are durable and safe. It also provides aggressive cutting action and longer service life. Perfectly compatible with all 4-1/2 inch angle grinders with 7/8 inch(22.2mm) arbor, and thickness 0.047 inch. THIN WHEEL DESIGN: GRASSLAND cut off wheel has a thin design for fast burr free and precise cutting performance with minimal material loss. The thin technology ensures accuracy and reduces the workload. The tough abrasive cut-off wheels are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper, and all other ferrous metals. The cutoff wheels perform much more aggressive cutting longer, faster, and reliably than other wheels that may shatter or prematurely wear. SAFE & DURABLE: Our thin grinder wheels offer a premium level of performance and extended wheel life. This GRASSLAND cutting wheel is bonded with aluminum oxide grain, to perform much more aggressive cutting in ferrous metals and stainless with safety and longer service life. During cutting metal applications, safety precautions are necessary to increase efficiency. Our metal cutting disc with solid steel wheel body 100% avoids the risk of shatter and injury for added safety. VERSATILE APPLICATIONS: GRASSLAND 4.5 cut off wheel for metal is suitable for all kinds of angle grinders. This thin cutting wheel 4 1/2 for angle grinder are designed for hard and continuous use on all metal, fiberglass, iron, plastic, steel, and stainless steel parts. The cutoff wheel 4-1/2 is made to be attached to an angle grinder and can be used to cut steel, stainless steel, fiberglass, plastic irons, and all other ferrous metals for aggressive cutting action. YOUR SATISFACTION IS GUARANTEED: At Double goats, we understand that you are placing your trust in us to provide you with the highest quality cutting disc products available. Regardless of your finishing application, GRASSLAND Abrasive products can help you get the job done with its full line of high-quality aluminum oxide cut off wheels from a name you can trust. We have 100% confidence in the quality of our products. Not only are our cutting discs made with love, but we go above & beyond with our customer care.
Agasthya 2017 Series Portable Flue Gas Analyzer BI 100 (O2) Sensor Technology Electrochemical (EC) Measurement Gas O2 0-30% scalable Response Time (T-90) 30 seconds Display Keypad LCD Display Power 80-230 VAC, 50 Hz, Adaptor Battery Lithium-ion rechargeable batteries Communication USB Data Storage Up to 150 set of data Enclosure Handheld Operating Temperature 4 to 50C Dimension 215 (L) x 120 (B) x 40 (H) mm Area Classification General Purpose Sampling Probe available as per temp max upto 1400 degC Probe length : Customised 32-Bit Cortex-M3 ARM Processor Automatic zeroing when the analyzer is switched ON Robust/Rugged design that is easy to operate and maintain Fast warm-up and response Rechargeable battery operation Built in sample pump, filter and flowmeter Condensate removal Stainless steel probe with sample hose Battery lifetime up to 8 hours 150 set of data storage USB for Charging & Data communication Powerful windows software for Analyzer data communication
Leak Tester is used for the seal integrity checking of packages, containers, bags, pipes that are used in food, beverage, pharmaceutical, daily chemical, cosmetic and electronic industries, etc Leak Tester complies with ASTM D3078 and GB/T 15171 standards and could be modified to ASTM F 2054 Bubble Test.
1. clean oil stains on fabric without leaving any traces; 2. safely used on wool, knitted fabric, cotton fabric, silk and synthetic fiber 3. Improve work efficency and productivity 4. no harm to environment and workers
Specifications PRF 10 Hz to 2000 Hz in 10 Hz increments Pulse Width Adjustable from 25 ns to 5,000 ns (0.1 MHz) with PerfectSquare technology Gain 0 to 110 dB Receiver Bandwidth 0.2 MHz to 26.5 MHz at â??3 dB System Linearity Horizontal: �± 0.5% FSW Resolution 0.25% FSH, amplifier accuracy �± 1dB Reject 0 to 80% FSH with Visual Warning Amplitude Measurement 0 to 110% full screen height with 0.25% resolution Automated Calibration Velocity, Zero Offset Straight Beam (First Backwall or Echo-to-Echo) Angle Beam (Soundpath or Depth) Test Modes Pulse Echo, Dual, or Through Transmission Range 3.36 mm to 13,388 mm (0.132 in. to 527.10 in.) at 5,900 m/s (0.2320 in./�µs) Velocity 635 m/s to 15240 m/s (0.0250 in./�µs to 0.6000 in./�µs) Zero Offset 0 to 750 �µs Refracted Angle 0�° to 90�° in 0.1�° increments Measurement Gates 2 fully independent gates for amplitude and TOF measurements Measurements Gate (1, 2) Thickness, Soundpath, Projection, Depth, Amplitude, Time-Of-Flight, Min./Max. Depth, Min./Max. Amplitude Echo-to-Echo Standard Gate 2-Gate 1, Optional IF Gate Tracking Other measurements Overshoot (dB) value for DGS/AVG, ERS (equivalent reflector size) for DGS/AVG, AWS D1.1/D1.5 A, B, C and D values, Reject Value, Echo to RefdB values DAC/TCG Standard DAC points Up to 50 points, 110 dB dynamic range Special DAC modes Custom DAC (up to 6 curves), 20-80% View Curved surface correction Standard OD or Bar correction for Angle Beam measurements
Includes: - Olympus NORTEC 600D Dual Frequency - Calibration certificate - Charger/adaptor - AC power cord - Getting Started leaflet - NORTEC 600D Users Manual and PC interface program on CD-ROM - Universal PowerLink eddy current probe cable - MicroSD memory card, 2 GB (1 internal, 1 external) - USB 2.0 (mini-AB) to PC cable - 67 watt-hour battery for 600 Series products, 10.8 V, 6.2 Ah, 67 Wh - AA battery holder for emergency use - Factory-installed hand strap on left side of NORTEC 600D instrument - Instrument transport case - Olympus NEC-8196L Weld Inspection Kit
