MDC-K400 Square and Round Billet Taper Measuring Instrument The product description The square, rectangular and round billet taper measuring instrument adopts high-precision displacement sensor as the measuring element, which has high precision and good repeatability. The measuring trolley ensures that the measuring sensor is in the correct position. The round copper tube taper measuring instrument ensures that the sensor is located at the diameter of the measuring section circle. Due to the characteristics of the round copper tube, one measurement action can measure multiple physical quantities on the copper tube section. The square billet taper measuring instrument can arrange measuring points in four directions and can measure straight or curved surfaces respectively, while the rectangular billet taper measuring instrument needs to install six measuring points to measure the taper of multiple faces at the same time. The product features 1. Use a high-precision vector displacement sensor 2. Battery powered, compact and flexible, easy to carry and use, strong anti-interference ability 3. Use wireless communication function and CRC check technology to ensure no error code and accurate signal transmission 4. SPI all-digital interface, programmable 16-bit A/D converter, with program-controlled digital filtering and program-controlled lossless amplifier inside, fully meeting the measurement requirements 5. High-power rechargeable battery, long standby time, suitable for on-site use of mobile operations 6. The measuring body and the display instrument are connected by wireless WIFI communication, which is easy to use The performance and index 1. Measurable copper pipe length is more than or equal to 1200mm, the measurement range of straight surface and arc surface displacement is 0-10mm, and the measurement cavity size can be customized according to user needs 2. The measuring range of straight face and arc face displacement is 0-10mm, and the measuring accuracy is less than or equal to 0.01mm 3. It can measure single taper, multi-taper, parabolic taper, continuous data acquisition, and continuous working time not less than 72 hours 4. Use wireless WIFI communication technology and CRC verification technology to ensure no error code and accurate signal transmission 5. Operating temperature of the product: 25 85 6. Power supply: 12V rechargeable battery, continuous measurement time is no less than 16 hours, standard USB interface The components of the product 1. A set of measuring trolley 2. Dedicated charger 3. Portable computers and wireless transceivers 4. Data processor discriminating software 5. Calibrator 6. Integrated transceiver system
MDC-K120 Slab Mold Taper Measuring Instrument Overview The taper of the narrow face of the mold has an important influence on the quality of the casting billet. Excessive taper will cause the mold to squeeze the billet shell, and a small taper will increase the air gap. With the continuous increase of the requirements of the casting billets quality and the continuous introduction of high-precision molds, the current taper measuring instrument in the domestic market generally have low measurement accuracy and complex measurement methods, which restrict the development of production. The new-generation taper measuring instrument developed high-precision inclination sensor, combined with ultra-low power consumption processor, which can quickly and accurately measure the actual taper value of the narrow copper plate of the mold. The instrument is fully functional, easy to use and suitable for slab molds of various lengths. Most of the current slab molds are single-taper, a narrow flat copper plate. The taper value required for production can be achieved by adjusting the angle between the narrow copper plate and the direction of gravity. The taper measuring instrument directly measures the angle between the narrow copper plate and the direction of gravity. According to habits and production needs, the angle is converted into the value of one-sided shrinkage of the upper and lower ports. The main features 1. Easy to calibrate, stable performance, easy to operate 2. Self-supporting, self-aligning, self-balancing 3. High measurement accuracy 4. LCD data reading 5. Fast response, real-time display reading 6. Adjustment of dynamic intelligent system 7. Lithium battery power supply, suitable for on-site use of mobile operations 8. The continuous measurement time is more than 36 hours 9. The sensor adopts multiple protections to meet the needs of on-site harsh environment measurement 10. The weight of the whole system is less than 3.8 kg, and it is equipped with a set of zero-point calibration table, which is convenient for on-site installation and measurement 11. Applicable to various arc, parabolic and straight molds The performance and index 1. Measuring range: 3 3 (measurement length can be customized according to users needs) 2. Measurement accuracy: 0.01mm 3. Temperature range: -25 85 4. Linearity deviation: -0.03mm 0.03 mm 5. The longest usage time after fully charged: 36 hours 6. The longest storage time after fully charged: 2 months The main components 1. Measuring instrument: central measurement and control unit, measuring sensor 2. Measuring stand 3. Standard table: standard surface, support frame, spirit level
SUPERSHINE ROBOT, a professional intelligent machinery manufacturer, focus on the research & development of remote control and auto pilot intelligent machinery, such as remote control lawn mower, auto pilot weed cutter, wireless remote controlled robot chassis kits, autonomous running tracked robot platform, etc. The products adopt the worldâ??s most advanced wireless remote control technology, intelligent autonomous control technology, and Italian mowing technology. We can produce approximately 1000 units of remote control slope mower per month. The machines undergo 100% indoor and field tests to ensure they are qualified and ready to use before delivery. We offer professional technicians who can provide online and on-site training for free. Our current products include: Remote Control Lawn Mower, Crawler Remote Controlled Brush Mower, Rubber Track Remote Operated Slope Mower, Wireless Radio Control Mowing Robot and Wheel Radio Controlled Grass Cutter. Model SSC550-75 SSC550-90 SSC800-150 SSW550-70 SSW800-150 Driving Method Crawler Crawler Crawler Wheeled Wheeled Engine / Power Yamaha 7.5Hp Loncin 9Hp Loncin 15Hp Loncin 7Hp Loncin 15Hp Cutting Width 550mm 550mm 800mm 550mm 800mm Adjustable Cutting Height Yes, by remote Yes, by remote Yes, by remote Yes, by hand Yes, by remote Self Charging Yes Yes Yes No Yes Dimension 1060 x 960 x 810mm 1060 x 960 x 810mm 1170 x 1270 x 910mm 1120 x 920 x 650mm 1170 x 1270 x 930mm Weight 135kg 150kg 240kg 100kg 230kg remote operated weed cutter China manufacturer factory supplier wholesaler radio controlled brush cutter China manufacturer factory supplier wholesaler remote controlled grass cutter China manufacturer factory supplier wholesaler https://wecanie.com/1735.html RC mowing robot China manufacturer factory supplier wholesaler https://wecanie.com/1737.html FAQ Q: Are You Manufacturer Or Trader? A: We are a China manufacturer of garden machinery and construction machinery. Actually, we produce most of the parts in our own factory for better cost and quality control. Q: How About Your Delivery Time? A: Generally, it will take 15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. Sometimes we have some in stock. Q: Is Lawn Mower Ready To Use? A: Yes. Before dispatch, Supershine assemble all the parts and set all the parameters. Every mower is 100% tested and strict quality control. Compared with similar products in the European and American markets, we have a huge price advantage and guaranteed product quality, allowing you to spend less money and enjoy the same or even better lawn mowers. We are looking for agents, distributors and dealers of remote control slope mower all over the world, welcome to contact us for more details.
Handheld Thermocouple Calibrator Model: LGK-JS02-064 Overview LGK-JS02-064 handheld thermocouple calibrator is a product . The calibrator can measure the temperature detected by two thermocouples. We fully consider the customer's needs. In order to be used conveniently, our calibrator pursues accuracy, stability, durability and beauty in research and development and design. At the same time, it is also committed to the characteristics of small size, flexibility, simple operation, and long standby time. Working principle The LGK-JS02-064 handheld thermocouple calibrator reads the temperature data of the thermocouple sensor at a single point through a special chip, and then displays it on the screen through a nixie light. Front view of LGK-JS02-064 handheld thermocouple calibrator Figure 4.1.1 Front view of thermocouple calibrator The above picture shows the front view of the LGK-JS02-064 handheld thermocouple calibrator. As can be seen from the above figure, the instrument has one switch button, two operation buttons, one interface to be calibrated and LCD display. Technical parameters Test temperature range: 0-1000 Operating temperature: 0 C-50 C Common working section 25 C-800 C Power supply: 2 AA dry batteries
1. Built-in static electricity elimination device, it can blow the particulate pollutant when eliminiate the static electricty. 2. ABS plastic casing, ergonomic handle, lightweight design to improve efficiency. 3. Automatic ion balance system, decay time less than 1 second, ion balance less than 15 V ( The distance is 15CM, the pressure 0.5 Mpa ) 4. Built-in miniature transformer, no need of external high voltage wiring safety design, no electromagnetic interference, no danger of electric shock. 5. The emitter needle can be replaced, and it can prolong the using life of the whole machine, optional throttle valve, control air flow. 6. A variety of connectors can be selected to meet the requirements of a variety of occasions. 7. It meets the safety standard requirements of CE FCC.
1. The grounding system is the most common and effective way to ensure the ESD safety of a process. Equipment Ground Monitor 001-9035SC is a comprehendive real time groud monitor that check the connection of equipment to grounds. It provides independent ground monitoring of up to four tools. It solved the problem of the damage which caused by the ground wire corroded, loose etc. And also saved the time and labor costs for regular inspections of ground connection. 2. Equipment Ground Monitor can continuously monitor the grounding status of equipment, ESD grounding system and resistance of equipment casing. 3. It provides independent ground monitoring of up to four tools. 4. 24 hours real-time monitor 5. Audible Alarm will enable when the resistance is over the limited resistance, and the audible alarm also could be disabled. 6. Specific limits of resistance can be set according to customer requirements to accurately control the grounding system. If no requirements are specified, default ground impedance is set at the factory. 7. The monitoring resistance group can be set in the range of 0 - 25 , accuracy 1% 8. Optional monitoring software platform to realize remote monitoring and data processing. 9. Wireless transmission or RS485 communication mode, suitable for different working conditions. 10. With alarm indicator, which can add external red and green LED alarm indicator. 11. Built-in LCD display which can display the resistance of setting value, testing value and monitoring status.
1. Monitor the real time connection and disconnection of ESD table mat to ground. 2. Monitor the real time connection and disconnection of wrist strap to ground, under the guarantee of double to ground, the path integrity of ESD to ground is more ensured. 3. Monitor has the fool-proofing function, red LED will flash and comes with audible alarm after power monitor on, plug wrist strap and connect proper ground, green LED will illuminate. 4. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally 5. Monitor will alarm when wrist strap is in open circuit or poor contact 6. Monitor 1 single wrist strap and 1 table mat simultaneously 7. Accuracy: + / - 10% 8. When monitor alarm, red LED light flashes and also comes with buzzer sounds 9. Suitable for any kind of single wrist strap 10. Beautiful appearance, strong anti-interference ability
1. Real time monitor single wrist strap grounding function 2. Monitor has OFF function, dial switch to ON, red light illuminate and monitor will turn green while connect wrist strap 3. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally 4. Monitor will alarm when wrist strap is in open circuit or poor contact. 5. Monitor will alarm when grounding cord is in open circuit accidentally 6. Monitor 1 single wrist strap and itself grounding cord 7. Wrist strap alarm limit: 1.2 M ( factory preset ) 8. Accuracy: 10% 9. When monitor alarm, red LED light flashes and also comes with buzzer sounds. 10. Suitable for any kind of single wrist strap 11. Beautiful appearance, strong anti-interference ability
001-0385 surface resistivity meter is designed according to ANSI / ESD S20.20, IEC61340-5-1, JESD 625-B, CECC AST & UL test rules. It is used to measure all conductive, anti-static and dissipative material s resistivity and ground resistance. This meter uses ASTM D-257 parallel bar induction method, and automatically calibrates the range through high speed op-amp. It is easy to use and has high reliability. Applications include engineering, maintenance, quality control, incoming inspection, manufacturing and training.
1. 001-9802 surface resistance / resistivity meter is designed according to ANSI / ESD S20.20, IEC61340-5-1, JESD 625-B, CECC, ASTM & UL test rules. It is used to measure all conductive, anti-static and dissipative material s resistivity and ground resistance. It is easy to use and has high reliability. Applications include engineering, maintenance, quality control, incoming inspection, manufacturing and training. 2. Measuring resistance: 10e3 -10e12 3. Surface resistivity: 10e3 -10e12 4. Measuring temperature range: 32 F-100nF ( 0C-37.8 C ) 5. Measuring humidity range: 10% -90% RH ( above 65% RH will affect the instrument measuring accuracy ) 6. Display mode: LCD display 7. Two-stage test voltage: 10V ( the measured resistance is less than 10e6 ) / 100V ( the measured resistance is 10e6 ) 8. AC adapter: input voltage -120V/AC or 220V/AC, output voltage -9V/DC 9. Power supply: DC or battery power supply, both are common used in US and overseas countries ( Note: External power supply and battery power supply cannot be used at the same time ) 10. 2.27 kg0.06 kg ( 5 lbs 2 ounces ) cylindrical electrodes with two conductive contact surfaces with a diameter of 63.5 mm 25 mm ( 2.5 inches 1 inches ). 11. The Shore A ( IRHD) hardness of the conductive material of each electrode is between 50 and 70 12. Dimension: 191mmx102mmx39mm 13. Automatic power-off function to extend battery using life. 14. The function of automatic return to zero which is convenient for continuous and quick testing.
1.All our Products have been  API7-1,ISO 9001, ISO9001:2008, ISO14001:2004. 2.Products are exported to various countries We have partners in the United States. 3.We have our own strong design team,wide range of products and many kinds .Cutters import from USA If you have any questions,please feel free to contact me .
Product introduction The multi-functional single-column electronic tensile testing machine GBH-2 is a mechanical property testing machine developed and manufactured by GBPI R&D team based on GB, JIS, ASTM, DIN and other standard requirements and market demands. The instrument uses high-precision sensors, and the force measurement accuracy is within ±0.5 %FS; high-precision ball screws are used for loading, stable loading, and long life of the testing machine; professional software support, fully automatic operation, equipped with color touch screen, real-time display of test curves Data and test reports can be queried, and the test is convenient and fast; the control measurement unit can be built-in or external, with perfect limit protection, overload protection, emergency stop and other safety protection functions. It is suitable for tensile, peeling, heat sealing, tearing, puncturing, compression, bending, shearing and other tests of various metal and non-metallic materials, and then calculates parameters such as breaking strength and elastic modulus of materials, and can also be used in the medical industry It is an indispensable testing equipment for physical property testing, teaching research, quality control, etc. Standards ASTM D828 ASTM E4 ASTM D882 ASTM D1938 ASTM D3330 ASTM F88 ASTM F90 ISO 37 JIS P 8113 QB/T 2358 etc.
- Product Name: Hygrometer - Temperature & Humidity meter - Brand: Digital Series - Quantity: 1 - Calibration certificate included - Specification: i) Large LCD Display ii) Multifunction iii) High Stability & Accuracy iv) Low Power Consumption
Circular Saw Blades Cold Saw Blade Hot Saw Blade TCT Circular Saw Blade HSS Circular Saw Blade Segmental Saw Blade Band Saw Blade Carbide Tipped Band Saw Bimetal Band Saw Shear Blades Shear Knives Peeling Knives
JBC Soldering iron stand Soldering sleeper base for JBC T245 T210 DDE soldering iron,Tool Stand with Cable Collector for JBC Soldering Irons,JBC Soldering Sleeper Base Quick Cartridges Change Sleep Mode, Soldering Iron Stand; for JBC T245 T210 DDE Soldering Iron. Features: 1. JBC's stands feature a line-up covering Advanced Series tools range. 2. The sleep mode automatically reduces the tip temperature when the tool is in the stand. As a result, a tip's life lasts up to 5 times longer. 3. The quick cartridge changer allows to switch between cartridges without interrupting your work. 4. The tool holder & the cable collector are easily adjustable to suit your work position & to keep the working area free of cable. Tools & Cartridges are not included. Packaging Includes: 1 x JBC Soldering Sleeper Base (Handle Not Included).
Description JAKEMY JM-8185 69-in-1 Multi-function Magnetic Screwdriver Set Slotted Y-type Phillips Tox Pentalobe Screw Bits Tournevis Parafusadeira Precision Screw Driver Repair Hand Tools Building Block Toy. Features: 1. Building block-like design, uncompressed building block splicing 2. The screwdriver handle built-in N35 industrial-grade strong magnet. Enhanced suction capacity for the screwdriver bits. 3. The three-dimensional twill anti-slip handle increases friction while the top screw cap flexibly fits the palm and rotates, improving efficiency 4. The internal structure of the box is combined with flexible building block elements, presenting you with a unique industrial aesthetic. 5. Scope of application: alarm clock/ mobile phone/ game controller/ camera/ glasses/ electronic products/ precision instruments, etc. Package Included: 22 x CR-V nickel plated bits 22 x middle shelf 22 x small shelves 2 x magnetizers 1 x handle
JM-8190 Precision Aluminum Alloy Screwdriver Set S2 Steel Hex Magnetic Handle Screw Driver Bits Cross Plum Y-shaped Star Disassembly Repair DIY Hand Tools. Features: 1. Extra long deep hole 26mm S-2 screwdriver bits 2. Precision 2D screwdriver bit head design fits seamlessly with screws 3. Screwdriver bits have built-in strong magnetism. External magnetic ring strengthened the magnetism of the bit. Prevent the loss of screws effectively as it can magnetize accessories. 4. A single screwdriver can remove more than 2500 screws. Save costs while improving work efficiency. 5. Light weight aluminum alloy handle with anti-slip texture. The screwdriver head is made of CSC S-2 high quality steel. 6. The screwdriver handle cap uses a high-precision bearing as the top pulley. The bearings are not stuck but smooth, so that you can work with less effort and use it with ease. Optional screwdriver bits model: Stand off (Motherboard philips): 1.5 Pentagon (Pentalobe): 0.8 Tri-wing: Y0.8 Phillips: 1.5 Torx: T1 External magnetic ring*1 Screwdriver*1
Dimension of sliding table saw 3200*400mm Gross cut capacity 3200mm Width of cut between saw blade and ripe fence 1250mm Saw blade 300mm(250-350) Height of cut 300mm 70mm Speed of main saw blade 6000r.p.m Tilling saw blade 45-90 degree Main motor 5.5kw(7.5HP) Scoring saw blade diameter 120mm Speed of scoring saw blade diameter 8000r/min Scoring motor 1.1kw Net weight 760kg Overall dimensions 3200*2550*900mm Loading 20GP/40HQ 8SETS/22SETS
Dimension of sliding table saw 3200*375mm Gross cut capacity 3200mm Width of cut between saw blade and ripe fence 1250mm Saw blade 300mm(250-300) Height of cut 300mm 70mm Speed of main saw blade 6000r.p.m Tilling saw blade 45-90 degree Main motor 5.5kw(7.5HP) Scoring saw blade diameter 120mm Speed of scoring saw blade diameter 8000r/min Scoring motor 1.1kw Net weight 750kg Overall dimensions 3200*2550*900mm Loading 20GP/40HQ 10SETS/22SETS
Dimension of sliding table 3200*415mm Gross cut capacity 3200mm Width of cut between saw blade and ripe fence 1250mm Saw blade 300mm Height of cut 300mm 70mm Speed of main saw blade 6000r.p.m Tiling saw blade 45 Degree Main motor 5.5kw Scoring saw blade diameter 120mm Speed of scoring saw blade diameter 8000r/min Scoring motor 1.1kw Weight 780kg Overall dimensions 3355*3175*1415mm
