1/4" Drive Tools 13pcs - 1/4"drive socket ( 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14mm) 8pcs - 1/4"drive deep socket ( 6-7-8-9-10-11-12-13mm) 2pcs - 1/4"drive extension bar 50mm, 100mm 1pc - 1/4"drive universal joint 1pc - 1/4"drive ratchet handle 1pc - Spinner handle 1pc - 1/4"drive flexible extension bar 1pc - 1/4"drive sliding T-bar 17pcs - 1/4"drive bit socket (PZ1,PZ2,PH1,PH2,SL4,SL5.5,SL7,H3,H4,H5,H6,T8,T10,T15,T20,T25,T30) 1/2"Drive Tools 18pcs - 1/2"drive socket (10-11-12-13-14-15-16-17-18-19-20-21-22- 23-24-27-30-32mm) 4pcs - 1/2"drive deep socket (14-15-17-19mm ) 2pcs - 1/2"drive spark plug socket ( 16-21mm ) 1pc - 1/2"drive universal joint 2pcs - 1/2"drive extension bar 125mm, 250mm 1pc - Adapter 1/2"Fx1/4"M 1pc - Couple 1/2"drive x Ã?5/16" 1pc - 1/2"drive ratchet handle 1pc - 1/2"drive speedy sliding T-bar 4pcs - Hex key (1.27,1.5,2,2.5mm) 16pcs- Bit Ã?5/16 x 30mmL (H8,H10,H12,H14 , SL8,SL10,SL12 , PH3,PH4 , PZ3,PZ4 , T30,T40,T45,T50,T55)
Complete range of leather crafting tools.
This is our 17 inch Triple Disc refiner Disc with conventional Ready to Fit design. In this we gave 4 mm rib width. We are using High Quality Raw material which leads to Increases the Strength and Durability of Refining Disc.Our discs are as per our customer needs. Depending upon their raw material, we are providing them best material composition.
All kinds drywall tools for celling install and plasterboard cutting,and As customer requests,we can OEM, all approved CE
We are professional in various powder coating line design, manufacture and installation. Especially for aluminium profiles powder coating line, we have installed many kinds of projects for home and overseas customers. We have rich experience in turnkey project for any kind of powder coating line.
Api vacuum insulated tubing Skype: julia0402zcy wechat: juliazcy Product name: pre-stressed vacuum insulated tubing/casing Product explanation: 1. Reduces the heat loss, ensures the steam quality being injected into the oil formation as well as the depth of steam injection can be increased. 2. Minimizes heat stress on well casing and cement mantle, protect the casing from damage by high temperature. 3. During oil production it will provide superior insulation and greatly reduce the loss of heat energy Product features: 1. The pre-stress will compensate the tubing expansion caused by temperature difference between the inner and the outer tubes so as to ensure reliable operation under high temp. 2. Gas absorbing materials are packed inside the annulus to clean up harmful gases and maintain good insulating property whilst in service.
Standard chiksan joint/chiksan swivel joint Product description 1).Size: 2'', 3'', 4'' 2).Working pressure:6000-20000psi(42mpa-140mpa) 3).Working temperature: -29°c~121°c. 4).Application enrvironment: standard or h2s 5).Standard: api standard 1 our swivel joints, with integral ball bearing, are manufactured on the basis of technologies from fmc, usa. 2 various models of swivel joints and their repair kits are available, suitable for normal or low temperature, or h2s environments, with sizes ranging from 2" to 4" and rated wp ranging from 6000-20000psi(42mpa-140mpa). 3 we can supply long and short radius swivel joints. Long radius swivel joints can minimizefluid shock, and has better performance of resistance for scouring and erosion. We also need to use short radius swivel joints for low pressure operation due to limited installation space. 4 patterns of swivel joint are made in nc machine tools, with even wall thickness and longer service life. Wall thickness difference of inner and outer arcs can meet fmc standard.The three-ball-race design can bear heavy load stably, and ensure less vibration with variable load. 5 all sizes of swivel joints can be interchanged with fmc equivalent products used in cementing and fracturing equipment. 6 sealing parts made of synthetic rubber with release hole are fitted with blowout preventing metal ring. When sealing parts leak, pressure will be automatically relieved. Safety performance is enhanced. 7 usually good lubrication can ensure that swivel joints work normally without much maintenance.
Api oilfield power swivel Power swivel is the device installing on the derrick of servicing rig, to provide rotating power. Except the use for such workover jobs as casing milling, milling, drilling cement plug and bridge plug and fishing, it is also used for sidetracking drilling, drilling open hole and coring. The product is designed and manufactured according to api 8c specifications.
1. Brief description CD1 electric hoist has only normal speed, which can satisfy the general working requirement. MD1 electric hoist has one more hoisting motor and one slow speed actuating device, which make the model have two speeds. When it works slowly, it can satisfy the precise task such as precise working of loading and unloading, sand to break-in. 2. Applications It can travel rotation through the trolley hanging on the I-steel, and install on the single beam crane, gantry crane, jib crane and overhang crane to rise and fall the cargos. So it can be used in factories, mines, wharf, warehouse, freight yards, and shops and so on which need lifting equipment for lifting heavy objects. Such as mining companies and railways, docks, warehouses. It is prohibited to manned. 3. Components Motor: Hoist Motor is an taper type rotor motor with braking,it is made by Nanjing special motor factory,it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently. Trolley: It is assembled and has running wheels. Herein, the runner wheels are mounted on top-class sealed ball bearings. Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings , to ensure smooth, low-friction operation. Wire Rope: Hoisting rope comply with the exporting ISO standards. The leading rope taken by the Drum, does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six. Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running. Electric control system: Model CD1 and MD1 is composed of the contactor box,controlling switch,cut-off limiter.the working voltage of controlling switch is 380V,36V or 24V(safety voltage). Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting . Testing: All our Hoists are tested on 125 % thus assuring safe working load and is issued with a test certificate. If you need other type electric hoist, please tell us, we will be pleased to be of further assistance!
Jm model slow speed electric winch is most commonly used winch in construction site or workshop, etc. And power supply for the electric winch varies from 110v-440v/50&60hz according to different countries’ situation. The electric winch also can divided into: construction winch, marine winch, mine winch, building winch, cable winch, etc. With different models, speeds and structures, electric winch is used widely, such as road construction, bridge construction, factory, mines engineering, harbor, building, etc. 1.Loading capacity:0.5~200 ton or customized design; 2.Wire rope capacity:20~3600m or customzied design; 3.Working speed:5~20 m/min or customized design; 4.Power supply:220~690v, 50/60hz, three phase or customized design.
Specifications: Sturdy, modular construction for easy maintenance. Complete flexibilities and minimum breakdown possibilities. Minimum "faraday cage effect" and "back ionization". Highest transfer efficiency with finger touch trigger. Highest "wrap around" effect with even thickness. Quick clean "stainless steel hopper" Easy to operate user friendly controls. Requires minimum training to operate.
Portable tempering glass breaker device is mainly used in emergency situations like the firefighting , explosive accidents , earthquake as well as other security situations , people in house , office, mall, bus, metro, ship, train or building need to find access , and rapidly break the tempering glass, We have produced a serials of devices meeting the different accidents , these devices can break below 18mm tempering glass . With one automatically controlled button , any people can use it , finding a survive access . This device is supported by build-in power with can maintain 5years using , usually we keep power switch insurance closed , it is safe to using and portable to operate, we have handle mode , bus paste mode , firefighting paste mode , and ladder paste mode .
This saw is for all oscillating tools that accepts bosch saw This is made of bim and ti-coated Very high quality and low price for sale For all orders
Zhuzhou tongda has in tungsten carbide turning tool possession an advanced production line for manufacturing dies and moulds and a production line for post machined cemented carbide products. We can also supply tailor-made products of various specifications based on the requirements of our customers. Because of tungsten carbide turning tool high precision and high reliability, tungsten carbide inserts have been broadly used worldwide for significant productivity improvements. Tungsten carbide has extremely high hardness and wear-resistivity compared with conventional steel materials, and it is expected that the tungsten carbide can be applied widely to dies and molds in the near future. In order to develop an efficient machining method of tungsten carbide for the dies and molds, series of cutting experiments were carried out to turn the sintered tungsten carbide materials with CBN tool. The selected sintered tungsten carbide work pieces are those containing tungsten carbide grains with mean grain size of 5µm, and 15wt%, 20wt% and 22wt% of cobalt binder. The sintered CBN tool selected contains super-fine grains of CBN with mean grain size of 1µm. The cutting speed was varied from 10m/min to 60m/min, and the tool wear and the surface roughness were measured. It is concluded that the tool wears less when cutting the sintered tungsten carbide containing larger amount of cobalt binder. The surface roughness of about 2µm in Rz is obtained. Tungsten Carbide Turning Tool Feature 1. Long life 2. Good toughness and hardness 3. High precision 4. Working efficiency 5. Right hand and left hand available 6. Accessories with pretty good quality The notable and rare combination of physical properties possessed by tungsten carbide makes it useful for a variety of applications. It is extremely strong and wear-resistant. There are only a few materials on earth that can be used to cut or engrave tungsten carbide, with industrial diamond abrasives being one of these. Its tensile strength is very high, but it is brittle under high pressures as a result. The melting point of tungsten carbide is also very high, at 5,200 degrees Fahrenheit.
Specification 1.Hot work tool steel. 2.Very good red-hardness with toughness. 3.Tools may be water-cooled in service. 4.May be cold-hobbed in the annealed condition. Application 1.Casting dies for aluminium, magnesium and zinc. 2.Extrusion dies and adaptor ring. 3.Hot stamping and press forge dies. 4.Shear blades for hot work and hot swaging dies. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / S G S Certification:ISO/mill certificate Payment:L/C at sight or T/T
We specialized in powder coating equipment over a decade year, with good quality and competitive price. We are national high-tech enterprise and got 13 technical patents in this field. Our products have been exported to dozens of countries and regions, such as usa, uk, japan, france, russia, balares, australia, denmark, canada, mexico, saudi, arabia, jordan, armenia, malaysia, singapore, kuwait, morocco, uae, isreal, new zealand, macedonia, etc. Characteristic of powder spray gun: 1. Outstanding performance on the spray of electrostatic shielding parts, such as grooves and intersection angles. 2. Adjust the output of the electrostatic automatically according the shape and distance of work pieces 3. Advanced high-speed automatic tracking control system, suppressing automatically before ignition. 4. Less heat produced and better stability of continuous work .The machine qualified 24 hours of continuous work. 5. Digital display control system, displays the preset voltage and preset current. 6. Set the preset voltage and the preset current quickly by the knob, convenient to operate. 7. Alarm reminder will automatically work if the preset setting value exceeds the reasonable limit 8. More powder output on condition of depression, with the aim of building up the speed. 9. The inner circuit area of the machine is closed, to prevent dust entering. 10. The tubes equipped on the machine have merits of low temperature resistance and none powder stick, it's light and easy to clean. 11. Easy to deal with enamel powder spraying, nylon powder spraying. 12. Accessories can be added for pipeline in wall coating. Any questions, contact me freely. Emily
The company design and manufacture of various types of industry standard, non-standard broaching tools, the main products are: a round broach all kinds of spline broaches, keyway broaches, plug, rolling wheels, luo lala knife, designed (tongue and teeth, tongue and groove) broach, broach rod, sheet scissors, compressors broaches and complex shaped cutting tools.
Spline or form broaches are essentially the same as round broaches. The difference is that they have splines or some other type of form ground parallel to the axis of the tool. These splines can be angular, involute, straight-sided, cam, lobed, square, or hexagonal.
We specialized in powder coating equipment over a decade year, with good quality and competitive price. We are national high-tech enterprise and got 13 technical patents in this field. Our products have been exported to dozens of countries and regions, such as usa, uk, japan, france, russia, balares, australia, denmark, canada, mexico, saudi, arabia, jordan, armenia, malaysia, singapore, kuwait, morocco, uae, isreal, new zealand, macedonia, etc. Characteristic of powder coating gun: 1. Outstanding performance on the spray of electrostatic shielding parts, such as grooves and intersection angles. 2. Adjust the output of the electrostatic automatically according the shape and distance of work pieces 3. Advanced high-speed automatic tracking control system, suppressing automatically before ignition. 4. Less heat produced and better stability of continuous work .The machine qualified 24 hours of continuous work. 5. Digital display control system, displays the preset voltage and preset current. 6. Set the preset voltage and the preset current quickly by the knob, convenient to operate. 7. Alarm reminder will automatically work if the preset setting value exceeds the reasonable limit 8. More powder output on condition of depression, with the aim of building up the speed. 9. The inner circuit area of the machine is closed, to prevent dust entering. 10. The tubes equipped on the machine have merits of low temperature resistance and none powder stick, it's light and easy to clean. 11. Easy to deal with enamel powder spraying, nylon powder spraying. 12. Accessories can be added for pipeline in wall coating.
We specialized in powder coating equipment over a decade year, with good quality and competitive price. We are national high-tech enterprise and got 13 technical patents in this field. Our products have been exported to dozens of countries and regions, such as usa, uk, japan, france, russia, balares, australia, denmark, canada, mexico, saudi, arabia, jordan, armenia, malaysia, singapore, kuwait, morocco, uae, isreal, new zealand, macedonia, etc. Characteristic of powder coating booth: 1, the area of spray booth will be confirmed according to actual working condition. 2, we will continue to improve our products, please consult us to confirm actual size and configuration. 3, single-station coating booth with 1 recovery system, 2 stations coating booth with 2 stagger recovery system.
