Find Verified Tools Instruments Suppliers, Manufacturers and Wholesalers

T12-D Constant Temperature Electric Soldering Station with LED digital display, 110V-230V 72W 951 Soldering Iron Welding Tool with 3pcs iron tip, Improvement T12-D Constant Temperature Lead-free Soldering Station for mobile phone PCB Welding Repair.

Auto sleep, Auto standby, 5 seconds for heating, Immersion tin in 6 seconds, Fast back temperature
Enhance temperature in One-button, Adjustable sleep time, Adjustable standby time

Five advantages on SFD T12-D soldering iron heat core
1. Compared with ordinary iron tip plating for 10 hours , our soldering iron is electroplated for more than 30 hours
2. Ordinary soldering iron head adopt domestic heating core, while our soldering iron head use imported heating core
3. Ordinary soldering iron tip without any code, but our soldering iron tip uses a unique code, you can trace to the source
4. When ordinary tip heated above 350 degrees, of which the temperature will jump for at least five minutes, and it will continue to jump when the temperature reaches 500 degrees or more. While our soldering iron tip won't jump and can be used directly!
5. The heat transfer of soldering iron head is high, and temperature of the iron tip is accurate. Difference of actual display temperature is not more than 2 degrees

YIHUA 1000B / 1000A 3-IN-1 Infrared BGA Rework Station: SMD Hot Air Gun 540W Preheating Station 75W Soldering Irons, YIHUA 1000B personal BGA rework station 3 in 1 SMD Hot Air Gun 75W Soldering Irons 540W Preheating Station. YIHUA 1000B Soldering rework station: powerful electronics repairing machine for all kinds motherboard / repair, YIHUA 1000B 3-IN-1 Infrared BGA Rework Station Feature:
1. Using the new microcomputer processor PID programmable temperature control technology and uses an infrared source and optics to target heat to individual components without dislodging other SMT parts by way of eddies air currents.
2. Adopt infrared weld technology which independent exploration , infrared penetration strength , components uniform heating , beyond the traditional hot air heating vowed to prevent blow off the IC surrounding small components.
3. Technician focused infrared heat is easy to target most component removal/replacement and re-work.
4. Infrared heat source bulbs are long-lived , un-expensive and easily replaced.
5. Has bright delicate , low voltage LED lighting , safety and energy conservation.
6. It has External Sensor Temperature control mode , that is detected by the sensor IC surface temperature control temperature , this function is good for freshman operation , itâ??s safe way protect components .
7. MountTechnology (SMT) components 15-35cm in size.
8. This machine has 540W heating system , widely to 120mm 120mm.
9. Preheating plate color is black , from the photics point of view , black color easy to absorb heating , shorten the warm-up time.
10. Powerful human function design , with the following functions
A. Temperature correction function Correction of temperature range 50 C 50 C ( Infrared lamp analog value 580 ).
B. Celsius / Fahrenheit temperature display function
11. This machine also has soldering iron function , if you have the device , you can used for all of the components solder , desoldering , preheating , repair all components , especially Micro BGA components.

YIHUA 8509 Micro Hot Air Gun Soldering Station with 3.5/3/2.5/2 mm Nozzle Temperature Adjustable SMD Rework Station Welding Tools.

Feature:
1: Unique micro nozzles: 4 mm nozzles ,3.5 mm nozzle, 3 mm nozzle, 2.5 mm nozzle, 2 mm nozzle, 1.5 mm nozzle
2: Low noise design: When in max air volume, the noise from detector is less than 60 DB, similar to normal indoor conversation sound.
3: Automatically cool-down function:
In automatic mode, temperature will cool down to 100 when hot air handle is put in the holder because holder is equipped with an automatic sensor. When in manual mode,this automatic function will be stopped.
4: Rotatable display screen.It is convenient to adjust the display screen position via slight press
5. and conversion function.
6. Temperature correction function.
7.Air gun auto. And manual conversion function


Please remove the screw at the bottom before use

Qianli RD-02 6 in 1 mainboard welding & desoldering repair holder fixture for Phone X-11 Pro Max repair, Qianli 6 in 1 repair fixture for Phone X-11 Pro Max motherboard / IC chip fixing repair and disassembly CPU / NAND fixed degumming and tinning.

Product Features :
Groove design for easy access.
Double-sided non-slip silicone feet.
Professional material selection is stable and durable.
High-temperature resistant chute fixed claw, the two-way limit is more stable.
Motherboard / chip fixation, maintenance, disassembly.
Fixed removal of glue and tin for CPU/hard disk.
Support models : For Phone X/XS/XS Max/11/11 Pro /11 Pro Max motherboard positioning clamp.
Function : mainboard / chip fixation, maintenance and disassembly, CPU / hard disk fixation, glue removal and tin removal Phone 11/11 Pro/11 Pro Max, Phone X/XS/XS Max

MECHANIC ET-10 Intelligent Constant Temperature Double Digital Display Heating Table For Middle Frame Removing BGA Reballing PCB Preheating Platform, for Repairing LED Lamp of Mobile Phone PCB.

It is suitable for any occasions that require stable control of heating, such as special materials, special field mold core heating, chip welding, LED lamp bead welding, PCB preheating, maintenance of electronic circuit boards, mobile phone screen removal preheating, chemical experiments, heating curing, etc.

Features:
1. 260W High Temperature Resistance Heating Table
2. Fast heat dissipation, digital display panel, there stage temperature control
3. It adopts Aviation aluminum material, anti-Scald design, and all edge has been protected prevent scald.
4. Voltage:110V/220V
5. Job dimensions: 100*100MM
6. Product size: 100*105*135MM
7. Temperature range : 20-320 Celsius

Widely usage:
1. Electronic Circuit Board Repairing
2. Phone Touch Screen & Middle frame Removing
3. LCD Beads Welding
4. Preheating in special Material ETC.
5. Liquid heating & Germiculture

These hammers including hammer tips are used on the metal, cane and wood shredders to crush metal scraps, sugarcanes and wood products.

Sugarcane Shredder Hammer
Metal Shredder Hammer
Wood Hog/Shredder Hammer

The hammer crusher is used to crush low to medium hard materials, such as limestone, gypsum, slag, coke, coal, etc. It is widely used in cement manufacturing, chemical, electric power, metallurgy, and other industries. In Cement plant, hammer crushers are often used for raw material preparation and clinker grinding.
Hammers are the main wear parts on hammer crusher.

Crusher Hammers
Hammer Heads

Mechanic M880 Cloud intelligent hydrogel film cutting machine with unlimited cutting times for cutting hydraulic sheets to protect Mobile Phone Watch iPad Tablets Front screen and rear glass. Mechanic M880 precision infinite film cutter for cutting the front screen back cover glass hydrogel film of mobile phone, watches, Airpods, cameras, iPads, etc.

Features:
Smart WIFI Bluetooth
Cloud intelligent film cutting machine
Precise cut. Automatic film feeding, small size, quiet and no noise
30 seconds fast cutting, quiet and no noise
Equipped with an automatic sensor
no need to worry about filming problems at all Cutting accuracyto 0.01mm
WIFI+Bluetooth dual smart operation
can connect WiFi,touch screen to operate independantly
can connect Application with mobile phone Bluetooth to operate

Package includes:
1 x M880 Main unit
1 x knife holder
1 x Blade
1 x Power Adapter
1 x Power Cord
1 x Scrapers
1 x Clean cloth
1 x Touch Pen
1 x Anti-Slip Pad

Uyue 946-1010 400W Constant Temperature Heating Preheating Platform for Mobile Phone LCD Screen Repair Screen Removal Heating Table, GBA Ball Planting Heating Plate 110V/220V.

Features:
1. It adopts Aviation aluminum material, anti-scald design, and all edge has been protected to prevent scald.
2. There stage temperature control,high-temperature resistance, fast heat dissipation, and digital display panel.
3. It can be used for repair cell phone screen, LED display, component heating work, SMD re-engineering work, PCB removing,soldering work.
4. The machine is a high-temperature electric products, remember to cut off the power if not using the machine to avoid danger and accidents.

Widely used to:
Phone Touch Screen & Middle frame Removing
LCD Beads Welding
Electronic Circuit Board Repairing
Liquid heating & Germiculture
Preheating in special material ETC

Relife RL-601M CPU Positioning Tin Planting Kit for Phone A8 - A14.

Features:
Suitable for Phone 6G/6 Plus/6S/6S plus/7G/7 Plus/8G/8 Plus/X/XS/XS Max/XR/11/11 Pro/11 Pro Max/12/12 Pro/12 Pro Max/12 Mini
Precision hole pitch design
Imported steel, round and square precise holes, make the tin balls more rounded and prevent the stencil from getting stuck in the tin balls
Built-in high-temperature magnet, strong magnetic adsorption, precise positioning, no deviation, high-temperature magnetism unchanged

UYUE 946C preheating station for Mobile Phone repair. UYUE 946C PCB heating platform intelligent digital display heater for PCB SMD heating phone LCD touch screen separating.

Warning:
1. The table should be in tidy and the material must be heatproof.
2. When it's working, should be careful to keep away from getting burned.
3. Pay attention to the heating element, high temperature will damage it.
4. Do not use heating plate near the combustible and flammable objects.
5. Do not move the machine until it's power off and cooling down .
6. This machine is high temperature electronic product. In case of any accident happen, remember to cut off the power while not use it.
7. Do not use the machine in high temperature (up to 300 degree) for a long time. Usually, no more than 8h.

Notes:
1. Manual measuring, please allow 1 ~ 3mm error,thank you.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the picture.

Sunshine 6 in 1 phone motherboard layered heating platform for Phone X-11 Pro Max CPU, SS-T12A M6 desoldering heating station for Phone X mainboard CPU, Phone logic board frame separate repair tools for Phone X XS XS MAX 11 Pro Max

Product Features :
Silicone non-slip foot pads and cooling holes : Hollow vents and silicone non-slip foot pads are used at the bottom to effectively isolate the temperature, anti-skid and efficient heat dissipation.
High hardness thick synthetic stone : The main body is made of special synthetic stone material, high temperature resistance, strong and durable.
High purity copper film : Ensure uniform and stable heat transfer and heating, and accurate card positioning.
Remove glue from CPU and Other components : Support a variety of chips/universal hard disk/fingerprint cable/CPU degumming and tin removal, accurate card position, non-destructive repair.

Mechanic Heat Kit Intelligent Reflow Soldering Heating Platform with 3.4inch Screen Display for Phone 11 to 13Pro Max Motherboard Repair, Intelligent Desoldering Reflow Degumming Layering Lamination Tin Planting Welding Mobile Phone Curve Heating Tool.

Features:
1. Intelligent Desoldering, Reflow, Degumming, Layering, Lamination, Tin Planting, Welding Mobile Phone Curve Heating Tool.
1. 3.4inch Screen Display Monitor temperature changes and realize reflow soldering temperature curve data monitoring.
2. Turbofan blades for heat dissipation, built-in strong wind cooling system.
3. Adopted new MCH ceramic double heating element is adopted, the platform has faster heating, more uniform temperature, and stable performance.
4. 5 professional mode selection, 3 common mode operation.

Description:
1. Reflow Soldering Preheating Platform is designed for the original solder of mobile phone motherboard, curve heating, intelligent and safe desoldering and reflow.
2. 5 application scene modes: degumming, layering, lamination, tin planting, and welding.
3. 3 commonly used memory temperatures, automatic recording of the current temperature and manual recording of the current temperature mode.
4. Suits for: Phone X/XS/XS Max/11/11 Pro/11Pro Max/12 Mini/12/12 Pro/12Pro Max/13 Mini/13/13 Pro/13Pro Max

Professional Digital Auto Glue Dispenser LY 983A Glue Dropper Solder Paste Liquid Controller Fluid Dispenser Tools Machine.

Features:
Manual or timer operation modes
Foot pedal controlled
Suck-back feature ensure no dripping
Designed for wide range of application as EFD, I&J Fisnar
Complete with an accessory dispensing kit
Timer mode dispensing time 0.01-99.99 seconds
Timer mode cycle time 0.1-9.9 seconds
Manual mode, materials could be dispensed continuously until operator release the foot pedal
This unit need to be connected to air compressor (1.5HP or above)

EN 143 Automated Filtration Efficiency PFE Tester Mask Testing Machine G506 is used to test the inhalation resistance and exhalation resistance of respirators and masks under certain condition.

Usage:
Mask Particulate Filtration Efficiency Tester is suitable for fast, accurate and stable detection of particulate filtering efficiency of various medical and daily protective masks, respirators, etc.

Standards:
GB 19083,
GB 2626,
GB/T 32610,
42 CFR Part 84
JIS/T 8151
EN 149,
EN 12941,
EN 14594,
NFPA 1972

Multifunction

1. This machine can be used for different filter material

2. Customized clamp for different sample size is available

3. Both salt solution and oil solution test can run on this machine

High Accuracy
1. Support Chinese and English, menu type operating mode and large LCD display, itâ??s easy to switch

2. Two test method available: efficient test and load test

3. Simple, fast and automate operation

Mijing CH5 Intelligent Motherboard Layered Desoldering Platform for Phone X-12 pro max PCB Teardown, MJ CH5 phone Motherboard Preheating Separating Desoldering Tools for Phone X Xs Xs Max 11 11 pro 11 pro max 12 12 pro 12 pro max 12 mini.

MJ CH5 Pre-Heating groove for phone X XS XS-MAX
MJ CH5-BC Pre-Heating groove for phone 11 11 pro 11 pro max
MJ CH5-E Pre-Heating groove for phone 12/12 pro/12 pro max/12 mini

Features :
Precise positioning, precise temperature, rapid temperature rise, non-slip weight increase, digital display temperature, intelligent 15 minutes sleep, 183 three minutes extreme speed rise, fast stratification, safe disassembly, no damage to the motherboard.

M860 WiFi+Bluetooth Cloud Intelligent Precision Cutting Machine AI Hydrogel Film for Phone Watch iPad Front Glass Back Cover Films Cutting.

Features:
1. MORE THAN BEAUTY BETTER QUALITY:
1).AUTOMATIC FILM FEEDING
2).WIFI+BLUETOOTH
3).CLOUD DATA
4).15 LANGUAGES
5).QUIET AND NO NOISE

2. WIDE APPLICATION FILM CUTTING MACHINE:
Suitable for front/rear films of mobile phones watches, Airpods, cameras, iPad, etc.

3. 30S FAST CUTTING QUIET AND NO NOISEï¼?
Equipped with an automatic sensor no need to worry about filming problems at all, Cutting accuracy to 0.01 mm

4. WIFI+BLUETOOTH DUAL SMART OPERATION:
It can connect WiFi,touch screen to operate independently can connect Application with mobile phone Bluetooth to operate.

5. MALL IN SIZE SILENT AND NO NOISE:
Intelligent film cutting machine-M860 smaller and lighter than previous one
More accurate, and convenient

6.REAR MEMBRANE PICTURE:
1). Machine input, computer IP transmission support printer DIY pictures.
2). Various models of mobile phones/computers watches/ game consoles, etc.
Complete real-time data updates.

Specification:
Working environment temperature: -5~45
Voltage: 110V-240v
Cutting accuracy: 0.1mm
Speed: 300-600mm/S
Maximum material width into the machine: 180mm
Maximum material depth into the machine: 120mm
Cutting pressure: 30-90 digital gear (corresponding pressure 150-450g)
Data transmission method: comes with cloud service output, no registration required
Advantages: Large touch screen display, comes with 15 languages.

New Design TBK-605 Mini UV Ultraviolet Curing LED Box Oven 48 Pcs LED Lights 100W 110V 220V Common Use for Mobiles LCD Repairs


Specification:
1 Power: 100W
2 48 LED lights
3 Net Weight: 3.5 kg
4 Gross weight:5KG
5 Wavelength: 365NM
6 Lamp Life: 8000-10000 hours
7 External dimensions: 36 450 195mm
8 Internal dimensions: 250 150MM

TBK-705A Dust Showcase Mobile Phone Dust Removal LED Scratch Crack Detection Cleaning Bench


Main Features:
Green light is good for eyes-protection, makes dusts show; it can also make OCA filming dustless.
White light illuminates & Green light makes dust show.
Lights and illuminates, Makes dusts show, Removes dusts & Wireless Charging.
High quality activated carbon filter.
Adsorption of water, dust and other particle matters.
Carefully handling every point, Inventiveness everywhere.
Adjust the wind as you like, the wind force can be adjusted according to user's preference.
Adjust the brightness as you want, the brightness can be adjusted according to user's preference.
Directly connects with 12V power supply, simple operation.


Function:

Remove dusts, White light iluminates Green light makes dusts show, Wireless charging.


Application Scope:

Wireless charging, Lamination OCA filming, Dustless working in small area.

LEISTO T12-11 soldering station for mobile phone welding repair. LEISTO T12-11 digital intelligent lead-free soldering station with 3pcs Soldering Iron Tip AC 220V 110V input, English language display, professional phone PCB soldering repair tool.

Features:
Just need 3 seconds, you can do welding work
Sleep function, Energy saving 30%-70%, don't need add tin to protect solder
Independent intelligent temperature control system and heating system, heat transfer efficiency increased by 30%.
Continuous welding of five solder joints, the maximum loss of temperature less than 25
High efficiency anti-static function, electromagnetic shielding function, can be free to deal with all the electronic components of the special requirements
The welding speed is improved, and the production efficiency is improved 30%-50%
Lower temperature welding, below 50-100 than other welding tools, it is not easy to burn the bad components and circuit boards.
Low temperature welding plus sleep technology, the integration of welding nozzle long life
The working life is 1-2 times of others tool

Installment Steps:
Plug the iron tip into handle
Connect the handle to iron handpiece stands
Connect the iron handpiece stands to the main control station
Connect the main control station to the electricity supply outlet
Adjust the operating temperature you need

Operation Steps:
Connect handle to the outlet behind main control station
Connect power cord to the outlet behind main control station
Select operating temperature that you require on LCD display
Choose one cartridge you want on the cartridge stand
Align the selected cartridge to the corresponding hole on handle and connect both, slightly press it down to join them together and pick it up. Then push it hard into the iron tip extractor to fasten the cartridge and handle together

Now the equipment can work after several seconds