Product Name MMO titanium anode
Material Titanium
Size customized
Type titanium anode
Colors black
shape Customer
Application industry
Package wooden case
Description Titanium block/ingot/billet
Material Gr1 Gr2 Gr3 Gr4 Gr5 Gr6 Gr7 Gr9 Gr11 Gr12 Gr23 Ti15333 BT1-00 BT1-0 BT1-2
Standard ASTM B381,ASTM F67,ASTW F136
Size customed
MOQ 1kg
Property high strength fine corrosion resistance low density and low weight
Tehnique Forging ,Machining
Application 1. Low Density and High Specification Strength
2. Excellent Corrosion Resistance
3. Good Resistance to Effect of Heat
4. Excellent Bearing to Cryogenics Property
5. Nonmagnetic and Non-toxic
6. Good Thermal Properties
7. Low Modulus of Elasticity
Our company produces titanium sponge, we are the largest producer in and one of the largest producers worldwide. Currently, we are increasing our capacity of production from 15,000MT to 80,000MT per month.
Anodes in a water heater are divided into sacrificial anode rods and titanium anode rods. A sacrificial anode rod is an exposed metal rod that is inserted into the water heater. It is designed to corrode slowly over time. The sacrificial anode is made from either magnesium, aluminum, or zinc. The lifespan of sacrificial anodes varies greatly based on local water conditions and quality. Annual inspection and replacement for sacrificial anode rods are recommended. In areas with sulfides in the water, there is a reaction with magnesium anodes which creates hydrogen sulfide gas that creates a rotten egg smell in the water. In areas with high conductivity water, aluminum anodes are depleted too quickly, leaving the tank unprotected.
Titanium anode rod, also known as powered anode rod, introduces an electrical current into the water heater to prevent corrosion. They don't corrode and require replacement regularly as sacrificial anode rods do. It provides consistent protection that extends the life of your water heater tank. Since no chemicals are added to the water as with sacrificial anodes, powered anodes will not create smelly water or aluminum hydroxide. In fact, some titanium anode rods can last for decades.
UTron manufacture mixed metal oxide coated titanium anode rod for water heater, which is a long-term solution to preventing sulfide smells (that rotten egg smell) produced by well water. With over 20 years of lifespan, you don't need to replace the anode rod at all.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis.
Parameters:
Material: Titanium
Size:1500*1200mm
Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm.
Porosity:60% - 75%
â?» Porosity and Size can be customized.
Technological Process
Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL
Features:
1. Three-dimensional grid porous structureï¼?
2. Strong corrosion resistanceï¼?
3. Optimal electrolysis performanceï¼?
4. High porosity and current densityï¼?
5. Uniform pore size distribution.
Applicantion
1. Liquid/gas diffusion layer;
2. Hydrogen absorber;
3. Hydrogen-rich water dispenser;
4. Diffusion layer of hydrogen cell stack;
5. PEM hydrogen production by water electrolysis.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis.
Parameters:
Material: Titanium
Size:1500*1200mm
Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm.
Porosity:60% - 75%
â?» Porosity and Size can be customized.
Technological Process
Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL
Features:
1. Three-dimensional grid porous structureï¼?
2. Strong corrosion resistanceï¼?
3. Optimal electrolysis performanceï¼?
4. High porosity and current densityï¼?
5. Uniform pore size distribution.
Applicantion
1. Liquid/gas diffusion layer;
2. Hydrogen absorber;
3. Hydrogen-rich water dispenser;
4. Diffusion layer of hydrogen cell stack;
5. PEM hydrogen production by water electrolysis.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis.
Parameters:
Material: Titanium
Size:1500*1200mm
Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm.
Porosity:60% - 75%
â?» Porosity and Size can be customized.
Technological Process
Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL
Features:
1. Three-dimensional grid porous structureï¼?
2. Strong corrosion resistanceï¼?
3. Optimal electrolysis performanceï¼?
4. High porosity and current densityï¼?
5. Uniform pore size distribution.
Applicantion
1. Liquid/gas diffusion layer;
2. Hydrogen absorber;
3. Hydrogen-rich water dispenser;
4. Diffusion layer of hydrogen cell stack;
5. PEM hydrogen production by water electrolysis.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis.
Parameters:
Material: Titanium
Size:1500*1200mm
Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm.
Porosity:60% - 75%
Porosity and Size can be customized.
Technological Process
Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL
Features:
1. Three-dimensional grid porous structure
2. Strong corrosion resistance
3. Optimal electrolysis performance
4. High porosity and current density
5. Uniform pore size distribution.
Application
1. Liquid/gas diffusion layer;
2. Hydrogen absorber;
3. Hydrogen-rich water dispenser;
4. Diffusion layer of hydrogen cell stack;
5. PEM hydrogen production by water electrolysis.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis.
Parameters:
Material: Titanium
Size:1500*1200mm
Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm.
Porosity:60% - 75%
â?» Porosity and Size can be customized.
Technological Process
Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL
Features:
1. Three-dimensional grid porous structureï¼?
2. Strong corrosion resistanceï¼?
3. Optimal electrolysis performanceï¼?
4. High porosity and current densityï¼?
5. Uniform pore size distribution.
Applicantion
1. Liquid/gas diffusion layer;
2. Hydrogen absorber;
3. Hydrogen-rich water dispenser;
4. Diffusion layer of hydrogen cell stack;
5. PEM hydrogen production by water electrolysis.
Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis.
Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL
Features:
1. Three-dimensional grid porous structureï¼?
2. Strong corrosion resistanceï¼?
3. Optimal electrolysis performanceï¼?
4. High porosity and current densityï¼?
5. Uniform pore size distribution.
Applicantion
1. Liquid/gas diffusion layer;
2. Hydrogen absorber;
3. Hydrogen-rich water dispenser;
4. Diffusion layer of hydrogen cell stack;
5. PEM hydrogen production by water electrolysis.
Origin: baoji, Shaanxi, China
Brand: Tianbang
Model: TB-NT-306
Application: Industry, Paraglider
Grade: Nitinol
Processing Services: Bending, Welding, Cutting
Nickel content: more than 50.4%
Standard: ASTM
Color: Natural, Amber or Blue
Shape: Round
Features: Hyperelasticity or Shape Memory
Surface Treatment: Polished
Sample: 1kg
Nitinol is a shape memory alloy, which is a special alloy that can automatically restore its own plastic deformation to its original shape at a certain temperature. Its expansion ratio is above 20%, the 7th power of 1*10, the damping characteristic is 10 times higher than that of ordinary springs, and its corrosion resistance is better than the current good medical stainless steel, so it can meet the application needs of various engineering and medicine , is an excellent functional material.
In addition to the shape memory function, memory alloys also have excellent characteristics such as wear resistance, corrosion resistance, high damping and high elasticity.
Grade: TiNi-01 transformation temperature: 20â??-40â??; TiNi-02 transformation temperature: 45â??-90â??; TiNi-SS transformation temperature: 5â??-15â??; TiNi-03 transformation temperature:
titanium wire offers high strength, long lasting durability and high corrosion and wear and tear resistance. In automotive, medial and aerospace industries, titanium is used for applications requiring stable and non-reactive materials.
Title: ASTM B861 Titanium pipe
Product brief introduction:
ASTM B861 titanium pipe is the titanium/titanium alloy pipe which means American standard ASTM B861. It is widely used for heat exchangers, condensers, evaporators and delivery pipes, etc. Many nuclear power industries use titanium pipes as standard pipes for their units.
Material:
pure titanium TC4 titanium molybdenum nickel titanium palladium alloy half TC4
Size:
DN15-DN800 *(2-10) mm
Classification:
Titanium rod, titanium plate, titanium wire, titanium pipe, titanium pipe fittings, titanium flange, titanium welding ring Processing according to drawings and materials.
Minimum order quantity: 50kg of material, 5 pieces of processing parts, customized. Ã?Â
Packing: As required or neutral packing.
Requirement:
1. The chemical composition of titanium and titanium alloy pipes shall comply with the provisions of GB/T3620.1. When the buyer re-inspects, the allowable deviation of the chemical composition of Jufuti Titanium Industry shall comply with the provisions of GB/T3620.2.
2. The allowable deviation of the outer diameter of the pipe should meet the requirements in Table 1.
3. The allowable deviation of the wall thickness of the pipe should not exceed �±12.5% of its nominal wall thickness, and the allowable deviation of the wall thickness of the pipe is not applicable to the weld of the titanium welded pipe.
4. The length of the pipe should meet the requirements in Table 2.
5. The fixed-length or double-length length of the pipe should be within the range of its indefinite length. The allowable deviation of the fixed-length length is +10mm. The double-length length should also be included in the incision amount when the pipe is cut, and the amount of each incision should be 5mm.
