titanium wire offers high strength, long lasting durability and high corrosion and wear and tear resistance. In automotive, medial and aerospace industries, titanium is used for applications requiring stable and non-reactive materials.
1.Product description: The difference from chemically pure titanium is that industrial pure titanium contains a large amount of oxygen, nitrogen, carbon and various other impurity elements (such as iron, silicon, etc.), which is essentially a titanium alloy with low alloy content. Compared with chemically pure titanium, its strength is greatly improved due to the inclusion of more impurity elements, and its mechanical and chemical properties are similar to those of stainless steel (but still lower in strength compared to titanium alloys). 2.The characteristics of industrial pure titanium bars are: low strength, but good plasticity, easy processing, stamping, welding, and good machinability; in the atmosphere, seawater, wet chlorine and oxidizing, neutral, weakly reducing media Good corrosion resistance and oxidation resistance are better than most austenitic stainless steels; but the heat resistance is poor, and the operating temperature should not be too high. 3.Industrial pure titanium bar is mainly used for working temperature below 350 â??, with little stress, but requires good plastic stamping parts and corrosion-resistant structural parts, such as: aircraft skeleton, skin, engine accessories; seawater corrosion-resistant pipes for ships, Valves, pumps and hydrofoils, parts of seawater desalination systems; chemical heat exchangers, pump bodies, distillation towers, coolers, agitators, tees, impellers, fasteners, ion pumps, compressor valves and diesel Engine pistons, connecting rods, leaf springs, etc.
Product Name: ASTM F136 Titanium Plate Brief product introdution:Medical titanium plate is a kind of plate that provides medical titanium raw materials for domestic and foreign orthopedic implant companies, such as bone plates, bone nail rods, intramedullary nails Pipes, Kirschner wire and prosthetic accessories and other materials. Executive standard: ASTM B265 ASTM F136 ASTM F67 Product material: GR1, GR2, GR5, GR7, GR9, GR12, GR16, Ti15333, etc. Product Specifications: T0.5-1.0mm x W1m x L2-4m T1.0-5.0mm x W1-1.5m x L2-3.5m T5.0-30mm x W1-2.5m x L3m T30-80mm x W1m x L2m Product surface: Black leather surface, bright surface, pickling surface Delivery status: Hot rolled, cold rolled, annealed Product use: Electroplating industry, glasses industry, titanium equipment industry, watches, accessories, electronics, chemical industry and other industries Product features: acid and alkali resistance, corrosion resistance, wear resistance, high temperature resistance, low temperature resistance, light weight and high strength, non-magnetic, non-toxic The characteristics of medical titanium plates produce medical titanium rods, plates, pipes, wires and other products, and provide medical titanium raw materials for domestic and foreign orthopaedic implant companies, namely bone plates, bone nail rods, intramedullary nails Pipes, Kirschner wire and prosthetic accessories and other materials. The products strictly follow the national standards for medical implanted devices. The characteristics of medical titanium plates are several hundred degrees higher than that of aluminum alloys. They can still maintain the required strength at moderate temperatures, and can work for a long time at a temperature of 450 to 500 �°C. These two types of titanium alloys are at 150 �°C to 500 �°C. There is still a high specific strength in the range of â??, while the specific strength of aluminum alloy decreases significantly at 150 â??. The working temperature of titanium alloy can reach 500 â??, and the working temperature of aluminum alloy is below 200 â??. Titanium alloy has good corrosion resistance The characteristics of medical titanium plate titanium alloy works in humid atmosphere and seawater medium, and its corrosion resistance is much better than that of stainless steel; its resistance to pitting corrosion, acid corrosion and stress corrosion is particularly strong; it is resistant to alkali, chloride, Chlorine organic substances, nitric acid, sulfuric acid, etc. It has excellent corrosion resistance. However, titanium has poor corrosion resistance to media with reducing oxygen and chromium salts.
Product brief introduction: 1.GR2 titanium block is one of titanium forging, which has low-weight, high specific strength, widely used in aorespace, chemistry,etc. 2.Payment terms: T/T, L/C. 3.Delivery time: 3-5 days. Features of titanium blocks: 1.High specific strength. The density of titanium is 4.51g/cm�³, which is higher than that of aluminum but lower than that of steel, copper and nickel, but its strength is much higher than that of other metals. The screws made of titanium alloy are light and strong. 2. Good corrosion resistance. Titanium and titanium alloys are stable in many media, and titanium alloy screws can be used in various corrosive environments. 3. Good heat resistance and low temperature resistance. Titanium alloy screws can work normally in a high temperature environment of 600 �° C and a low temperature of minus 250 �° C, and can maintain their own shape without changing. 4. Non-magnetic and non-toxic. Titanium is a non-magnetic metal and will not be magnetized in a large magnetic field; it is not only non-toxic, but also has good compatibility with the human body.
1.Introdution Titanium Alloy Blocks are blocks crafted from Titanium Alloy Ingots. Crafted with 9 titanium alloy ingots, the material is similar to the original diamond block, but there are still some differences, he will emit a fire particle effect, and has 6 points of brightness. It is used to save storage space or decoration, and can also be used as a base for beacon towers (beacons). 2.Material: TA0, TA1, TA2, TA3, TA9, TC4, Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9 3.Specifications: Thickness �´5.0ï½?�´50 4.Other requirements: The board surface is flat, straight, and the surface is free of defects. Features: low density (4.51KG/m3), high melting point (1660â??), strong corrosion resistance, high specific strength and good plasticity. 5.Common materials: Titanium alloy block: Grade4 Poor punchability and good thermoplasticity. Various forms of welding can be carried out, and the strength of the welded joint can reach 90% of the strength of the base metal. Machining performance is still good, it is necessary to use cemented carbide, large amount of cutting, slow speed, and sufficient cooling. Good corrosion resistance and thermal stability. It is one of the most widely used titanium alloys, and it is used for long-term work parts below 400 C.
Title: ASTM B861 Titanium pipe Product brief introduction: ASTM B861 titanium pipe is the titanium/titanium alloy pipe which means American standard ASTM B861. It is widely used for heat exchangers, condensers, evaporators and delivery pipes, etc. Many nuclear power industries use titanium pipes as standard pipes for their units. Material: pure titanium TC4 titanium molybdenum nickel titanium palladium alloy half TC4 Size: DN15-DN800 *(2-10) mm Classification: Titanium rod, titanium plate, titanium wire, titanium pipe, titanium pipe fittings, titanium flange, titanium welding ring Processing according to drawings and materials. Minimum order quantity: 50kg of material, 5 pieces of processing parts, customized. � Packing: As required or neutral packing. Requirement: 1. The chemical composition of titanium and titanium alloy pipes shall comply with the provisions of GB/T3620.1. When the buyer re-inspects, the allowable deviation of the chemical composition of Jufuti Titanium Industry shall comply with the provisions of GB/T3620.2. 2. The allowable deviation of the outer diameter of the pipe should meet the requirements in Table 1. 3. The allowable deviation of the wall thickness of the pipe should not exceed �±12.5% of its nominal wall thickness, and the allowable deviation of the wall thickness of the pipe is not applicable to the weld of the titanium welded pipe. 4. The length of the pipe should meet the requirements in Table 2. 5. The fixed-length or double-length length of the pipe should be within the range of its indefinite length. The allowable deviation of the fixed-length length is +10mm. The double-length length should also be included in the incision amount when the pipe is cut, and the amount of each incision should be 5mm.
1.Introduction GR5 titanium sheet has high strength and low density, good mechanical properties, good toughness and corrosion resistance. In addition, the process performance of GR5 titanium sheet is poor, cutting is difficult, and it is very easy to absorb impurities such as hydrogen, oxygen, nitrogen and carbon during hot processing. There is also poor wear resistance and complex production process. Titanium alloy sheets are mainly used in the processing of various tools, and the diaphragms of acoustic sootblowers for dust removal in power plants.. GR5 Titanium sheets are mainly used to make aircraft engine compressor parts, followed by rockets, and structural parts of high-speed aircraft. In the mid-1960s, titanium and its alloys have been used in general industry, for making electricity in the electrolysis industry, condensers in power stations, heaters in petroleum refining and seawater desalination, and environmental pollution control devices. Titanium and its alloys have become a corrosion-resistant structural material. In addition, it is also used in the production of hydrogen storage materials and shape memory alloys. 2. Product Specifications Thickness range: 0.5mm-200mm Titanium Coil/Titanium Tape: 0.1mm-0.5mm thick*1m/1.2m/1.5m wide. Standard version: 0.5mm-20mm thick*1m*2m. Cold rolled sheet: 1mm-4mm*1m*2m Hot-rolled sheet: more than 4mm thick Wide and thick plate: more than 5mm*2m*6m The above are common specifications, and specific specifications can also be customized according to customer requirements.
Product : Titanium Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 21 reviews price : Start from 20 USD RFP India is Indias wellknown manufacturer supplier and exporter of Titanium which is a metallic element and is being recognized for its high strengthtoweight ratio It is a strong metal with low density that is quite ductile lustrous and metallicwhite in colour The relatively high melting point probably over 1650 C or 3000 F makes it useful as a refractory metal Titanium is used in steel as an alloying element ferrotitanium to reduce grain size and as a deoxidizer and in stainless steel to reduce carbon content Applications for titanium mill products sheet plate bar wire forgings castings can be found in industrial aerospace recreational and emerging markets Powdered titanium is used in pyrotechnics as a source of brightburning particles Titanium pipes tubes
We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc
