Product Introduction In a proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst and provide a channel for the gas participating in the reaction and the water generated. It is one of the key components of the membrane electrode. The porous titanium plate has a good and uniform large number of pores, the porosity can be controlled by adjusting the diameter of the powder, and it is made of sintering, high-temperature resistance, and corrosion resistance. Product Parameters Color: Metallic Shape: Square plate, disc, can be customized Process: Powder sintering Fine filter: 1 m~65m Material: Pure titanium Operating Temperature: 300 Thickness: 0.8mm 2.8mm Performance: Acid resistance, alkali resistance, high-temperature resistance, breathable Features 1. Corrosion resistance 2. Porous air permeability 3. High conductivity 4. High thermal conductivity 5. Good permeability Due to its characteristics, porous titanium plates can also be used in the following industries: (1) Manufacture of sweating material. That is, the pores of ordinary powder metallurgy materials are impregnated with low-melting point substances, and they work at high temperatures At this time, the impregnation melts and seeps out, making the material sweat to dissipate heat. In this way, ordinary materials can be used to replace expensive heat-resistant alloys, and the service temperature of heat-resistant parts can be further increased. (2) Manufacture filter material. Used to filter gas, filtrate and poison, etc. (3) Impregnated with anti-friction agent to manufacture oil-containing and oil-free lubricated bearings; impregnated with spices to manufacture fragrance-containing handicrafts, etc. (4) Manufacture materials such as vibration reduction, noise reduction, and heat insulation.
In a proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst and provide a channel for the gas participating in the reaction and the water generated. It is one of the key components of the membrane electrode. The porous titanium plate has a good and uniform large number of pores, the porosity can be controlled by adjusting the diameter of the powder, and it is made of sintering, high temperature resistance and corrosion resistance. Product Parameters Color: Metallic Shape: Square plate, disc, can be customized Process: Powder sintering Fine filter: 1 m 65 m Material: Pure titanium Operating Temperature: 0 300 Thickness: 0.8mm 2.8mm Performance: Acid resistance, alkali resistance, high temperature resistance, breathable Features 1. Corrosion resistance It exists between the bipolar plate and the catalyst layer. During the electrochemical reaction, the high current density is 2A/cm2, which has high electrical corrosion resistance and must have corrosion resistance; 2. Porous air permeability Serve as a medium for hydrogen/oxygen or methanol/air to diffuse to the catalyst layer, and must be a porous and breathable material; 3. High conductivity To act as a current conductor, it must be a highly conductive material; 4. High thermal conductivity The reaction is an exothermic reaction, and overheating will cause damage to the proton exchange membrane. The gas diffusion layer must be a high thermal conductivity material to conduct heat away to avoid damage to the proton exchange membrane; 5. Good permeability Fuel cell reaction to generate water will cause performance degradation, so the gas diffusion layer must be able to export water and have high hydrophobicity; Due to its characteristics, porous titanium plates can also be used in the following industries: (1) Manufacture of sweating material. That is, the pores of ordinary powder metallurgy materials are impregnated with low-melting point substances, and they work at high temperatures At this time, the impregnation melts and seeps out, making the material "sweat" to dissipate heat. In this way, ordinary materials can be used to replace expensive heat-resistant alloys, and the service temperature of heat-resistant parts can be further increased. (2) Manufacture filter material. Used to filter gas, filtrate, and poison, etc. (3) Impregnated with the anti-friction agent to manufacture oil-containing and oil-free lubricated bearings; impregnated with spices to manufacture fragrance-containing handicrafts, etc. (4) Manufacture materials such as vibration reduction, noise reduction, and heat insulation.
The production of PTL (porous titanium sintered plate) is a key component in the manufacture of hydrogen production electrolyzers. PTL is a type of electrode material that is used to catalyze the reaction that produces hydrogen gas from water. The resulting PTL porous titanium sintered plate is then coated with a catalyst material such as platinum or iridium, which helps to increase the efficiency of the hydrogen production reaction. The parameters of PTL (porous titanium sintered plate) used in hydrogen production electrolyzers can vary depending on the specific application and design of the electrolyzer. However, some common parameters for PTL porous titanium sintered plates used in hydrogen production electrolyzers include: 1.Porosity. 2.Pore size. 3.Thickness. 4.Catalyst loading. The PTL (porous titanium sintered plate) used in hydrogen production electrolyzers has several key features that make it an effective catalyst for the hydrogen production reaction. Some of the features of PTL porous titanium sintered plates include: 1.High surface area. 2.Corrosion resistance. 3.High conductivity. 4.Tailorable porosity. 5.Durable and long-lastinge. 6.Effective catalyst. The PTL (porous titanium sintered plate) used in hydrogen production electrolyzers has several important applications in various industrial processes. Some of the common applications of PTL porous titanium sintered plates include: 1.Hydrogen production: PTL plates serve as the catalyst for the hydrogen production reaction in electrolyzers, splitting water molecules into hydrogen and oxygen using an electric current. 2.Fuel cells: PTL plates are also used in fuel cells as an electrode material, facilitating the chemical reactions that produce electricity from hydrogen and oxygen. 3.Water treatment: PTL plates are used in water treatment applications to generate hydrogen peroxide or ozone for use as a disinfectant or oxidant. 4.Electrochemical synthesis: PTL plates can be used in various electrochemical synthesis processes to facilitate the production of chemicals and materials such as chlorine, caustic soda, and hydrogen peroxide. 5.Environmental remediation: PTL plates are used in environmental remediation applications to degrade contaminants such as chlorinated solvents and pesticides. Overall, the PTL porous titanium sintered plate is a versatile and important component in various industrial processes, providing efficient and reliable catalytic performance in a variety of applications.
Pure titanium ingots and alloy ingots are both found in titanium ingots, which are made by melting and casting mostly titanium sponge. Due to their uniform composition, consistent quality, and availability of large-sized ingots, large-sized pure titanium ingots, which are generated using electron beam melting, in particular, significantly contribute to advances in product quality and productivity. Titanium ingot can be used in consumer goods, medical implants, artificial bones, ship hulls, bridges, chemical equipment parts (reactors, pipelines, heat exchangers, and valves, among other things), aviation engines and parts, and chemical equipment. Product information Titanium and titanium alloy ingot is the product name. Size: 380mm-960mm (15"-37.8") in diameter, 2000mm-3000mm in length (78.7"-118") Material: Grades 1, 2, 4, 5, 7, 9, and 12 Standard: AMS 4928Q, ASME B348, ASTM F136, and ASTM F67 Surface: Purity when polished: 99.95% 99.999% Point of melting: 1660 C Application of a product 1. The aerospace sector Aircraft Motor components Planetary rockets 2. The use of electric power and seawater desalination Nuclear and thermal power plants Plants that desalinate seawater 3. The chemical sector Chemical factories (pipes, heat exchangers, valves, etc.) 4.Fourth-generation engineering Ships, bridges, and equipment used on ocean platforms 5.Construction Roofing Draped walls Monumental places 6.Industry of motorcycles and automobiles Motor components Motorcycles 7. Implants for medical care Synthetic bones Welfare goods 8. Sporting equipment and everyday essentials Golf tees Sporting goods Eyeglasses Cameras Wristwatches
Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries. Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300â?? Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. 4. Has certain metal or alloy properties. Energy absorption, noise reduction, heat resistance, shock resistance, cushioning, heat conduction, electrical conduction, high strength and good toughness. Suitable for high pressure environment. Weldable and simple machining, easy loading and unloading. 5. Stable pore shape and uniform distribution ensure stable filtration performance. The regeneration performance is good, and the filtration performance recovers more than 90% after regeneration. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Such as: seawater desalination, sewage treatment, transformer oil, lubricating oil, fuel oil and other oils, organic solutions, inorganic solutions, medicinal liquids, beverages and other liquids; coarse and fine filtration; various gases, steam dust removal, sterilization, removal of oil mist ; Noise reduction, flame retardant, heat resistance, catalytic reaction, catalyst filtration, gas buffer, sweating and cooling, porous electrode, antifreeze device manufacturing, etc. Package and Shipment 1.� Titanium Plate Sintered Filters� are usually packed in cartons, wrapped in soft film,� fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic� bags no damage during� transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
The production of PTL (porous titanium sintered plate) is a key component in the manufacture of hydrogen production electrolyzers. PTL is a type of electrode material that is used to catalyze the reaction that produces hydrogen gas from water. The parameters of PTL (porous titanium sintered plate) used in hydrogen production electrolyzers can vary depending on the specific application and design of the electrolyzer. However, some common parameters for PTL porous titanium sintered plates used in hydrogen production electrolyzers include: 1.Porosity: The porosity of the PTL porous titanium sintered plate is an important parameter that determines the surface area available for the hydrogen production reaction. Typically, PTL plates have a porosity of around 30-50%, which provides a large surface area for efficient hydrogen production. 2.Pore size: The size of the pores in the PTL plate can also affect the efficiency of the hydrogen production reaction. Generally, PTL plates have pore sizes ranging from 1um to 100um, depending on the specific application. 3.Thickness: The thickness of the PTL plate can vary depending on the design of the hydrogen production electrolyzer. TopTiTech can customized the thickness from 1mm to 3mm. 4.Catalyst loading: The amount and type of catalyst material used to coat the PTL plate can also affect the efficiency of the hydrogen production reaction. Typically, platinum or iridium catalysts are used, with loading levels ranging from a few micrograms per square centimeter to several milligrams per square centimeter.
Product Introduction Pure titanium ingots and alloy ingots are both found in titanium ingots, which are made by melting and casting mostly titanium sponges. Due to their uniform composition, consistent quality, and availability of large-sized ingots, large-sized pure titanium ingots, which are generated using electron beam melting, in particular, significantly contribute to advances in product quality and productivity. Titanium ingot can be used in consumer goods, medical implants, artificial bones, ship hulls, bridges, chemical equipment parts (reactors, pipelines, heat exchangers, and valves, among other things), aviation engines and parts, and chemical equipment. Products information Titanium and titanium alloy ingot is the product name. Size: 380mm-960mm (15"-37.8") in diameter, 2000mm-3000mm in length (78.7"-118") Material: Grades 1, 2, 4, 5, 7, 9, and 12 Standard: AMS 4928Q, ASME B348, ASTM F136, and ASTM F67 Surface: Purity when polished: 99.95%-99.999% Point of melting: 1660 C Products Description 1. Uniform composition; 2. Consistent quality; 3. Availability of large-sized. Package and Shipment 1. Titanium Plate Sintered Filters are usually packed in cartons, wrapped in soft film, fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
Product Introduction Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed, and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300 Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Package and Shipment 1. Titanium Plate Sintered Filters are usually packed in cartons, wrapped in soft film, fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic bags no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
Product name: titanium block, titanium cube, titanium forging Material: Domestic: TA1, TA2, TA3, TA4, TA9, TA10, TC4; American Standard: GR1, GR2, GR3, GR4, GR5, GR7, GR11, GR12, GR23; National standard: GB/T16598-1996 Ti 6Al 4V, Ti-0.2Pd, Ti0.3Mo 0.8Ni, T3AI 2.5V, Ti 6AI 4V ELL American Standard: ASTM B348, ASTM B381, AMS 4928 Specifications Outer diameter 400-700*inner diameter 150-500*height 40-250 Features 1. Anti-pressure; 2. High temperature resistance; 3. Anti-corrosion; 4. Professional customization.
Products Description The microporous titanium powder sintered corrugated plate is made of titanium powder after forming and sintering at high temperature, so the surface particles are not easy to fall off; the service temperature in the air can reach 300C; it is suitable for filtering various corrosive media, such as weak hydrochloric acid , sulfuric acid, hydroxide, seawater, aqua regia and chloride solutions such as iron, copper and sodium. Product parameters Product name: Microporous titanium powder sintered corrugated plate Brand: TOPTITECH Porosity: 35-45% Penetrability: 3-800M/MhKPa Working pressure: 2.5Mpa Operating temperature: 300C Shape: Round disc, sheet, tube, round bar, cap customizable Specifications: 200mm*150mm*1.0mm (customizable) Filtration accuracy: 0.5 m 0.5um-70um Groove depth: 0.4mm Product Usage 1. Used for matching with stainless steel or titanium filterï¼? 2. Orifice plate material for gas distribution fluidized bedï¼? 3. Filtration, washing and drying of materials in the pharmaceutical industryï¼? 4. Precise filtration of various hydraulic oils and lubricating oils in the machinery industry 5. Filtration of high-temperature corrosive wastewater in the petrochemical industry 6. Recovery of catalyst in catalyst filter 7. High temperature protection facilities on textile instruments and equipment 8. The electrolysis electrode on the hydrogen production device. Product advantages Because the microporous titanium powder sintered corrugated plate has overall heating, no heating inertia, and selective heating, the temperature of the material surface, interior and central area is balanced, the crystal particles are evenly heated, the temperature difference between each part is small, the overall internal structure of the material is relatively complete, and the performance is better. excellent. Production Process The microporous titanium powder sintered corrugated plate is made by adding high-purity powder into the rolling mill and rolling under pressure. After being rolled and formed by the rolling mill, it is sintered at high temperature in a vacuum sintering furnace. Note: 1. During the rolling process, the pressure of the rolling mill is very important, which affects the air permeability of the board. Yinggao has the personnel to carry out pressure rolling to ensure the air permeability is qualified. 2. The sintering time in the vacuum sintering process affects the service life of the board, so sufficient and appropriate sintering time is the key process of the sintering process.
The microporous titanium powder sintered corrugated plate is made of titanium powder after forming and sintering at high temperature, so the surface particles are not easy to fall off; the service temperature in the air can reach 300C; it is suitable for filtering various corrosive media, such as weak hydrochloric acid , sulfuric acid, hydroxide, seawater, aqua regia and chloride solutions such as iron, copper and sodium. Product parameters Product name: Microporous titanium powder sintered corrugated plate Brand: TOPTITECH Porosity: 35-45% Penetrability: 3-800M³/M²hKPa Working pressure: 2.5Mpa Operating temperature: 300C Shape: Round disc, sheet, tube, round bar, cap customizable Specifications: 200mm*150mm*1.0mm (customizable) Filtration accuracy: 0.5 m 0.5um-70um Groove depth: 0.4mm Product Usage 1. Used for matching with stainless steel or titanium filter 2. Orifice plate material for gas distribution fluidized bed 3. Filtration, washing and drying of materials in the pharmaceutical industry 4. Precise filtration of various hydraulic oils and lubricating oils in the machinery industry 5. Filtration of high-temperature corrosive wastewater in the petrochemical industry 6. Recovery of catalyst in catalyst filter 7. High temperature protection facilities on textile instruments and equipment 8. The electrolysis electrode on the hydrogen production device. Product advantages Because the microporous titanium powder sintered corrugated plate has overall heating, no heating inertia, and selective heating, the temperature of the material surface, interior and central area is balanced, the crystal particles are evenly heated, the temperature difference between each part is small, the overall internal structure of the material is relatively complete, and the performance is better. excellent. The main features are as follows: 1. Strong plasticity. 2. Uniform pore size distribution. 3. Long service life. 4. Strong corrosion resistance. 5. High-temperature resistance. Production Process The microporous titanium powder sintered corrugated plate is made by adding high-purity powder into the rolling mill and rolling under pressure. After being rolled and formed by the rolling mill, it is sintered at high temperature in a vacuum sintering furnace.
Product name: Titanium wire Grade: TAO, TA1, TA2, TA3, TA4, TA5, TA6, TA7, TA9, TA10, TC4, TC6, TC11, GR1, GR2, GR3, GR5 Ti6AL4V ELI, Ti6AL7Nb, Ti13Nb13Zr, Ti1533 Standard: GB/T3623, ASTM B863, ASTM B348, ASTM F67, ASTM F136 AMS4951-2003 Industrial titanium welding AMS49542003 Ti-6Al-4V alloy wire Specification: A, titanium wire specification: 0.8-6.0mm B. Specifications of titanium wire for glasses: 1.0 6.0mm C. Specifications of titanium wire: 8.0mm (special for hangers) D. Welding wire specification: 2.0mm, 2.5mm, 3.0mm Surface: pickled, bright Features: light weight, corrosion resistance, high strength, good heat resistance, good ductility, non-toxic, non-magnetic, excellent mechanical strength, etc. State: annealed (M), hot-working (R), and cold-working (Y) (annealing, ultrasonic flaw detection) Applications include those for the military, medical, sporting goods, eyewear, jewelry, headwear, electroplating hangers, and other industries.
0A grade sponge titanium is the basic link of titanium industry, it is the raw material of titanium material, titanium powder and other titanium components. Generally, it is light gray particles with clean surface. 0A grade titanium sponge (the spongy metal titanium) produced by metal thermal reduction method generally has a purity % (mass) of 99.1 to 99.7. The total impurity element % (mass) is 0.3-0.9, the impurity element oxygen % (mass) is 0.06-0.20, the hardness (HB) is 100-157. Product grade It is divided into seven grades according to the purity. Production Process Titanium sponge is actually the same substance as titanium, but in a different form. In the smelting process of titanium, the product (titanium) obtained through the process of magnesium reduction-distillation of titanium tetrachloride looks like a sponge, hence the name sponge titanium. Their chemical formulas are represented by Ti. Titanium magnesium reduction method to produce sponge titanium is to reduce titanium tetrachloride to titanium metal titanium with magnesium at high temperature. The reaction process involves multiple systems such as TiC14-Mg-Ti-MgC12-TiC13-TiC12, which is a complex physical process chemical process. The formula is as follows: TiC14+2Mg=Ti+2MgC12 In order to obtain high-quality sponge titanium, Mg and MgCl2 must be separated. Application Sponge titanium is the raw material for the production of all titanium products, whether it is titanium plates, titanium rods, titanium processed parts, and sintered porous titanium filter elements used in the filtration and separation industry, cannot do without sponge titanium.
Product Introduction GR1 Titanium mesh from TopTiTech is produced by weaving pure titanium wire, so it is also called titanium mesh. According to the surface of the raw material, titanium mesh (or titanium wire mesh) can be classified into black and bright varieties. The black titanium mesh is made of pure titanium wire with graphite emulsion coating on the surface, which is suitable for ship filtration and manufacturing seawater filtration titanium mesh. The graphite emulsion coating of GR1 titanium mesh from TopTiTechis removed before weaving pure titanium wire into the net. It is suitable for manufacturing electrode nets, titanium battery current collection nets, and fine chemical liquid filter titanium nets. Product parameters Material: GR1, GR2 Production process: plain weave Filter hole type: square Filtration accuracy: 0.02mm-50mm Width: 5mmâ??3000mm Titanium mesh use: chemical filtration, fuel cell anode titanium current collector, electrolyzer anode mesh Products classification 1. Pure titanium wire Tiâ?¥99.6%, black surface, black titanium mesh is suitable for seawater filtration and other industries where the purity of the solution is not high. 2. High-purity titanium wire: the surface is bright without oxidation layer, and the bright titanium mesh is suitable for manufacturing titanium electrode mesh and chemical titanium filter mesh. What are the advantages about Ti? Titanium has excellent qualities such as light specific gravity, high strength, low temperature resistance and corrosion resistance, and is not easy to oxidize. It has the reputation of strategic metal and the most valuable metal in the 21st century. It is extensively utilized in a variety of industries, including aircraft, shipbuilding, the military, chemical machinery, electric power, seawater desalination, and medical equipment. It has an important position and role in the development of the national economy. It can also be used in high-temperature electric furnace, mining, petroleum, chemical, food, medicine, machinery manufacturing and other industries. Products application Performance and application of titanium mesh: Titanium mesh has good corrosion resistance in acidic and alkaline solutions, and is used to manufacture titanium filter mesh, titanium anode mesh, ion membrane electrolyzer electrode mesh and other products. Titanium mesh has strong corrosion resistance in seawater.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use. The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc. Specification 1. spherical aerator head Bottom diameter: 150mm-200mm 2. Flat aerator head Diameter: 100mm-300mm 3. Tube aerator head Diameter: 14mm-80mm Length: 10mm-1000mm What are the features? 1. The aeration aperture is fine and uniform, and the efficiency is high; 2. The air bubbles diffuse evenly, and there will be no clogging of pores; 3. High temperature resistance and corrosion resistance; 4. Fast oxygenation speed; 5. Washable and reusable; 6. Customizable. How does titanium aeration head work? Aeration is mainly used in sewage biological treatment In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate. Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use. The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc. Specification 1. spherical aerator head Bottom diameter: 150mm-200mm 2. Flat aerator head Diameter: 100mm-300mm 3. Tube aerator head Diameter: 14mm-80mm Length: 10mm-1000mm What are the features? 1. The aeration aperture is fine and uniform, and the efficiency is high; 2. The air bubbles diffuse evenly, and there will be no clogging of pores; 3. High temperature resistance and corrosion resistance; 4. Fast oxygenation speed; 5. Washable and reusable; 6. Customizable. How does titanium aeration head work? Aeration is mainly used in sewage biological treatment In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate. Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
Pure titanium aeration head is a kind of advanced sewage treatment equipment parts made by international advanced technology. The main part of the pure titanium aeration head is made of industrial pure titanium powder as the main raw material, and molds of different styles and sizes are customized according to customer needs. After the titanium powder is pressurized and formed, it is sintered in high temperature vacuum, and finally the connection interface is put into use. The pure titanium aeration head produced by TopTiTech has uniform structure, small aeration bubble diameter, high aeration efficiency, convenient installation, low energy consumption, and corrosion resistance. It is widely used in sewage treatment, industrial organic wastewater treatment, and oxidation pool equipment. and biofilters, etc. Specification 1. spherical aerator head Bottom diameter: 150mm-200mm 2. Flat aerator head Diameter: 100mm-300mm 3. Tube aerator head Diameter: 14mm-80mm Length: 10mm-1000mm What are the features? 1. The aeration aperture is fine and uniform, and the efficiency is high; 2. The air bubbles diffuse evenly, and there will be no clogging of pores; 3. High temperature resistance and corrosion resistance; 4. Fast oxygenation speed; 5. Washable and reusable; 6. Customizable. How does titanium aeration head work? Aeration is mainly used in sewage biological treatment In the sewage treatment tank, the porous pure titanium aeration head can greatly increase the oxygen content in the sewage, thereby satisfying the activity of microorganisms that adsorb sewage impurities and increasing the sewage treatment rate. Whether it is the treatment and purification of urban sewage, industrial sewage, etc., it is inseparable from the use of pure titanium aerators.
1. Name: ASTM F136 Ti-6Al-4V ELI Titanium Bars For Surgical Implants 2. Standard: ASTM F136 3. Material: Ti-6AL-4V ELI 4. Size: Dia2.5 60mm L 5. MOQ: 50kg 6. Shipment: By sea or by air 7. Payment Terms: Usually TT and also LC, DA etc. can be accepted. 8. Package: Standard export packing. 9. Test Report: Third-party test report can be provided. 10. Advantage: our titanium and titanium alloys bar, rod can reach h6 tolerance, more than 1100MPa tensile strength, micro structure can reach A3, and quick delivery within 7 days if have stock and 15 20 days if producing. NOTE: the special specification can be solved according to customers requirements.
China Grade TA1,TA2,TA3,TA4,TC4,TA9,TA18,TA23. America Grade:Gr1,Gr2,Gr3,Gr4,Gr5,Gr7,Gr9,Gr12. China Standard:GB/T 2965 GB/T32185. America Standrd:ASTM B348. Specifications: 2 mm~100 mm. Surface: black, pickling. Product characteristics: small density, high specific strength, acid resistance, alkali, salt, seawater corrosion resistance, superior mechanical performance. Main uses: used for petroleum industry, electric power industry, seawater desalination industry, salt and alkali production industry, coking industry, medical and surgical implants.
China Grade:TA1,TA2,TA3,TA4,TC4,TA9,TA18,TA23. America Grade:Gr1,Gr2,Gr3,Gr4,Gr5,Gr7,Gr9,Gr12. China Standard:GB/T 16598. Americal Standard ASTM B381. size:outdiameter(200-1500mm),indiameter(60-1200mm),higt(20-700mm). Delivery status:annealing stateï¼?Mï¼?,hot processing stateï¼?R ,cold processing state. Apply:Medical, aviation, military, petrochemical, metallurgy, electroplating, shipbuilding, mechanical equipment, petroleum equipment and other industries.
