Best quality Plain MDF Wood or MDF sheet
Best quality Melamine MDF
Best quality HMR MDF
2 - 6 mm MDF board/panel, made of farmed eculptues wood residuaries, non-toxic additives and chemical glues. Per export standard.
The panel is produced by mixing chipped wood with glue. Pressed with high pressure. Standard Size: 4x8 ft (1220 2440 mm.) *Special size is available Thickness: From 9 - 35 mm. Standard Thickness are 9,12,15,16,18,19,20,22,25,28,30,35 mm. Glue: E0, E1, and E2 Advantage: Less expensive, Strong screw holding, Light-Weight, Eco friendly There are Certificate FSC, EN, CARB, JIS A5908 and DIN 68761
Duplex Board It is a recycle paper board which is used for export purposes. Theses boards include:- Eco Board( Natural Back) Chrome Board ( Grey Back) Super Chrome Board (White Back). Size : 80-350gr, weight : MT.
Size.10wx 12lx .5h Plastic bag and paper caton standard
Description: Panel produced by mixing chipped wood with glue. Pressed with high pressure. Standard size: 48 ft (1220 2440 mm.) * Special size is available Thickness: 9 - 35 mm. Glue: E0, E1, and E2 Advantage: Less expensive, Strong screw holding, Light-Weight and Eco friendly Standard: FSC, CARB, EPA, EN, JIS, TIS and Green Lable
Melamine Laminated on Particleboard and Melamine Laminated on MDF baord are made of Melamine impregnated paper laminated on Particleboard & MDF Board and pressed with hot press with high temperature and pressure. Used for furniture, interior decoration or construction. -Available size; 1220x2440 mm and 1840x2450 mm -Availalble Melamine on MDF thickness starts from 6mm -Availalble Melamine on PB thickness starts from 9mm -Very stylish decor. -Made in Thailand Product.
Solid Rubber Wood Butt Joint / Finger Joint Laminated Board Size : 1220 mm x 2440 mm x 18-20 mm (Thickness) Grade : AB Grade (1 Side Clear A Grade / 1 Side B Grade with Black Kont, White Knot) Origin : Thailand Loading Port : Songkhla Port or Laem Chabang Port, Thailand Supply Quantity : 200-300 CBM per Month Loading Type : 40' HC Container / 33-35 CMB per container / Bundle Pack with Plastic Wrapped Payment Term : Negotitation Delivery : Within 30 Days after Contract Signed
FIBERBOARD Fiberboard is produced using two technologies: dry method by drying and pressing raw materials, as well as wet method, which allows you to achieve maximum environmental friendliness of the product. The raw material for the production of fiberboard is the waste of sawmilling of coniferous and birch species processed into wood fiber. Due to the use of such raw materials, FIBERBOARD is of high quality. FIBERBOARD of medium density dry continuous method of production of TSN 35 and TSN 40 grades according to TU 5536 005 93222532 2015 . The launch of fiberboard production at the Vyatka Plywood Mill took place in 2003. The company is equipped with German BISON equipment, the technological level of which allows to produce high-quality fiberboard. FIBERBOARD of Vyatka plywood Mill is used for the production of doors and wall panels, in construction, for the production of moldings and furniture.
Oriented strand board (OSB) is replacing plywood, especially for timber framed houses and in the packaging industry with efficiency and sustainability. OSB is used instead of cement-based building materials reducing carbon emission. To produce oriented strand board, logs are sliced into long chips called strands. These are laid in perpendicular layers and bonded using resin. The result is a strong board that resists moisture, giving it a high load capacity. Thus OSB is strong yet flexible. OSB is produced in huge, continuous mats to form a solid panel product of consistent quality with no laps, gaps, or voids. Finished panels are available in large dimensions, minimizing the number of joints that can "leak" heat and admit airborne noise.
Description: Panel with LPM (Low-pressure melamine) sheet laminated on top. Standard size: 4x8 ft (1220x2440 mm.) *Special size is available Thickness: PB 9 - 35 mm. / MDF 2.5 - 30 mm. Glue: E0, E1, and E2 Advantage: Moisture-proof and heat resistance, Shatter and scratch-resistant, Abrasion resistance Standard: FSC, CARB, EPA, EN, JIS, TIS and Green Lable
Size : 10wx 12lx .5h Easy to carry Plastic bag.And paper caton standard
Product Description 3L quality Sisal fiber UG Quality Sisal Fiber SSUG quality sisal fiber Fiber length 90cm (3ft) up. Fiber color: a mixture of whitish and yellowish free from defective decortications free from tows, and properly brushed. Fiber length 60cm (2 feet) up. Fiber color can be brownish and spotted through damaged leaves or greenish. Fiber length 60cm (2 feet) up. Fiber color can vary from yellowish to darker and stained. Equipment : 100% Natural Sisal Fiber Fiber Strength Package, N / g 300m 780 Impurities rate 5 Humidity regin 13 Use Spinning, making ropes, fabric, cores for steel wire rope, polishing, carpet, pulp, building materials such as gypsum board, doormat, and other types of products Packaging : Bundling by rope or cable (100kgs / pack)
Aluminum Color Coated Coils 1) Alloy: 1050, 1060, 1100, 3003, 3004, 3005, 3105, 5005, 5052, 5083, 5754 2) Temper: Various status 3) Thickness: 1.0-4.0mm 4) Width: 50-2300mm 5) Weight: 2.0-2.5 tons per pallet 6) Length: 1000-6000mm 7) Frontispiece Painting: PVDF & PE (Brand: PPG) 8) Frontispiece guarantee: Coating guarantee for 20 years. 9) The Thickness of the Baffle Paint: The thickness of paint coating is 30u. 10) Face Slab For Film: Adopt PVC film, thickness for standard is 60u (can be negotiated if the client need higher thickness) 11) Color Requirements: Could according to the color board of color number of the client offer. 12) Gloss Requirements: Could do it from 20% to 60% according to the gloss request of the client 13) Dimensions and weight can be produced according to clients' specifications. 14) Applications: construction, decoration, air-conditioner and radiators,package
Fiberboard is produced by mixing fiber (from wood) with glue. Pressed with high pressure. Standard Size: 4 x 8 ft (1220 x 2440 mm.) *Special size is available Thickness: 2.5 - 30 mm. Glue: E0, E1, and E2 Advantage: High-density fiberboards, Moisture Resistant, No Splinters, Smooth surface consistent, Easy to paint and cutting Standard: FSC, CARB, EPA, EN, JIS, TIS and Green Lable
We can supply S4S wooden parts or 4 Sides planing wooden part from 100% solid rubber wood AB Grade. One side perfected clear A grade and another side is B Grade (Black Knot, Sound Knot. No Pith). We can supply 300-500 CMB per month. Customized sizes. This wooden part is suitable for wooden furniture items. Delivery can be made within 30 days after confirmed order or signed contact. 35 CMB for 1 x 40' HC container loading quantity Please contact us for more details. Thanks.
HFC-245fa, or 1,1,1,3,3-pentafluoropropane, is a third-generation alternative blowing agent designed to replace chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) in various applications. It is primarily utilized as a blowing agent for rigid polyurethane (PU) foam, which is extensively used in refrigerators, cold storage, and building boards. Additionally, HFC-245fa serves as a refrigerant, effectively replacing R-123 and R-22 refrigerants in central air conditioning systems (chillers). Quality Index: Purity: 99.8% Moisture (% w/w): 0.0020 Acidity (as HCl, ppm w/w): 0.0001 Evaporation Residue: 0.01 Color: Colorless liquid HFC-245fa's high purity and low moisture content make it suitable for a wide range of industrial applications, ensuring optimal performance and reliability.
Particleboard, mdf furniture.
