FIBERBOARD
Fiberboard is produced using two technologies: dry method by drying and pressing raw materials, as well as wet method, which allows you to achieve maximum environmental friendliness of the product.
The raw material for the production of fiberboard is the waste of sawmilling of coniferous and birch species processed into wood fiber. Due to the use of such raw materials, FIBERBOARD is of high quality.
FIBERBOARD of medium density dry continuous method of production of TSN 35 and TSN 40 grades according to TU 5536 005 93222532 2015 .
The launch of fiberboard production at the Vyatka Plywood Mill took place in 2003. The company is equipped with German BISON equipment, the technological level of which allows to produce high-quality fiberboard.
FIBERBOARD of Vyatka plywood Mill is used for the production of doors and wall panels, in construction, for the production of moldings and furniture.
Fiber Board
Mineral fiber board We are a manufacturer of mineral fiber ceiling board & t-bar in china, and our products are mainly exported, which enjoy good reputation among our customer. Mineral fiber ceiling board Standard size: 595x595mm, 595x1195mm Thickness size : 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 15mm , 18mm, 20mm Further information please visit www.Hbshengxing.Com If you are interested in our products, please do not hesitate to contact us. Be sure you would get high quality at competitive price.
Mineral fiber board contains more than 92% of mineral fiber with no harmful substances. The board has an excellent fire resistant attribute which is tested and conform to BS standards. In carton.
Fiber cement board Sigma boards are autoclaved to become stable product. *properties: 100% non-asbestos Density: 1300 kg/m3 Coefficient of thermal expansion: 0.11 kcal/m.Hroc Bending strength: over 180 kgf/cm2 Linear expansion rate: 0.1% Water absorption rate: 35% Water penetration rate: 0% Water content: 8% Incombustibility according to cns 6532 and bs 476 Two hours of fire rating forfi6mm wall system with w-csp concretefj *advantages: Light weight, only 1/3 of total weight compared to rc brick wall The wall is solid and firm inside, and resistant to impact pressure. Painting, tiling and nailing is possible in the new system Noise reduction can be up to 46 db Good efficiency, workers can work three times faster compared to rc. Working environment can keep it dry and clean for better management. Cost of this system will be almost the same as the brick wall. Certificates with two hours of fire rating. We can produce according to client's requirements, below are the general size, for your reference. 1220 x 2440 x 6mm, 1220 x 2440 x 10mm, 1220 x 2440 x 12mm, 1220 x 2440 x 16mm
Acoustical mineral fiber ceiling board 603mm x 603mm(2ft x 2ft) 595mm x 595mm(2ft x 2ft) 603mm x 1212mm(2ft x 4ft) 595mm x 1195mm(2ft x 4ft) Product name: acoustical mineral fiber ceiling board Model number: mm Come from: china We can supply mineral fiber board, ceiling t grid , and calcium silicate board. We are factory located in jinzhou. Our products enjoy the advantages of good decorative performance, sound isolation, fire-proof and heat and coldness insulation As well as energy saving. They are mainly used in interior decoration of top-grade Buildings such as hotel, restaurant, shopping mall, theater, ballroom, station, Hall, and office building. Mineral fiber ceiling board: 1) to decorate roof; with function of soundproof 2) sizes: 595 x 595mm, 600 x 600mm, 603 x 603mm, 600 x 1, 200mm 3) thickness: 8mm, 9mm, 10mm, 12mm, 14mm, 15mm 4) surface: normal design and special paint, like armstrong 5) edge: square edge and tegular edge 6) accessories: ceiling t bar (32h and 38h model) 7) main tee, cross tee, wall angle different thickness and specification available Please feel free to contact with us for more information. We sincerely wish to co-operate with customers both at home and abroad Box The box adds the wood tray adds to wrap up the plastics
Acoustical mineral fiber ceiling board My factory, produce manufacturing and export: 1)acoustical mineral fiber ceiling board. 2)ceiling board. 3)pvc gypsum board. 4)roast the metals of the paint t l. 5)ceiling t grid. 6)calcium silicate board Physical data: Material:wet---formed mineral fiber. Surface finish:factory---applied vinyl latex paint. Color:white. Size: 600*600*(7.5---20)mm. 600*1200*(10---20)mm. 603*603*(7.5---20)mm. 603*1210*(10---20)mm. Edge : 1)angled tegular. 2)square lay-in. Light reflectance:minimum lr 0.80*. Fire resistance:it is grade a fireless material. Rh70:appropriate for relative humidity up to 70%, temperature up to 30f¦. No-asbestos. The box adds the wood tray adds to wrap up the plastics Box
paper fiber cutting board and RPET tableware.
We Are Indonesia MDF MANUFACTURER ## Made from Mix Hardwood Fiber ## Density 720kg-800kg ## Usage for Furniture components - Decoration ## Housing components ## All sizes available ## MOQ 48 cbm in 40ft ## Price range depend on sizes from usd 190/cbm - usd 230/cbm FOB Indonesia main port ## Market oriented : Middle East ,Western Europe , Australia and South Africa ## Payment term by Bank transfer deposit 3% only , No L/C accepted
Indonesia Origin MDF Manufacturer and Exporter ***** MDF Board Thickness from 2mm t0 25mm x 1220mm x 2440mm 0r 1830mmx3660mm ***** Flatt and Smooth surfaces by well sanded ***** made from Mix hardwood Fiber *** High Density vary from 720kg - 820kg /m3 depend on thickness *** All sizes available by demand *** also available Melamine face MDF ***** usage : Housing components - Furniture components - Carving purposes **** MOQ 48 cbm in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** No L/C accepted due to high Banking fee & Complicated procedures
