Tattoo Removal Machine Suppliers and Manufacturers

ALTUS AL7103 D 7 KG Washing Machine

We are a supplier of used and new Heidelberg printing machine, parts and consumables globally , we acknowledge the demand of offset products and we want to fill that gap by bringing to the world the best affordable quality offset products.

Drum material, European Certificated Stainless Steel AISI 304 Cooling unit supplies automatic cooling down Filtration by front located stainless steel filter Specially designed aluminium fan Specially designed serpentine heaters 600 kg/pes Hydraulically controlled tilting & Pneumatically controlled door opening Control unit with PLC & LCD touch screen panel LG brand PLC, Touch screen Power transmission with special design belt system Power supply is 380 Volt, 3 phase, 50 Hertz Optional Features European Certificated AISI 316 Stainless Steel Rotating door Silicon softening injection system Humidity control unit Natural gas heating Auto cooling for electrical box by air conditioner Dryer mechanices are totally controlled by PLC control unit to command heating, rotating, time and cycle. Tilting hydraulically controlled and door opening pneumatically controlled. Unloading is done by tilting as standard option Steel serpentines, stainless steel drum and cooling unit are standard features as well Dryer machines are totally controlled PLC control unit to command heating, rotating, time and cycle. Tilting hydraulically controlled and door opening pneumatically controlled. Unloading is done by tilting as a standard option. Steel serpentines, stainless steel drum and cooling unit are standard features as well

Plc Controlled System And Touch Screen(99 Pieces, 99 Steps Recipes Can Be Saved Plc Kontrol Sistemi Ve Touch Screen Inner And Outer Drum Is AISI 316L Quality Stainless Steel Adjustable Drum Speed With Inverter Two Paint Preparation Container For Mix Chemicals Circulation Pump System Quality Electronic Equ�±pment Adjustable Amount Of Water Adjustable Temparature Adjustable Dyeing Time Hydraulic Tilting System Working System is Manuel And Automatically

ECO EFFECT * Eco effect machine is produced with 28 years of experience. Ar-ge has been done for 3 years and tested for 2 years. * The echo effect machine is a machine that uses less water. The water it uses is 1 / 2-3 floto. * There is no need to use pumice stone in Eco effect machine. The patented drum design offers you the comfort of pumice stone. * Eco effect machine provides washing in a shorter time compared to the pumice stone processes you normally do. * Eco effect machine provides sustainable washing thanks to its environmental feature. 40% in water, 35% in chemical energy, stone washing is 100% advantageous. * Pumice stone is not used in the eco effect machine, thus eliminating 95% of your waste. * Eco effect machine also eliminates the wear of your drums caused by pumice. It ensures long-term operation of your machines.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

Can supply: PC BOTTLES (LIGHT BLUE COLOR) BALES. Post industrial and post commercial. Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe. Can load in 1x40HC container approx. 22 MT ( 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

We can supply: PET BOTTLES (aprox. 95% CLEAR - 5% COLORS) BALES. Post consumer from sorting line. Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe. Can load in 1x40HC container aprox. 26 - 28 MT. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials.

1 x Used Hitachi ZX130LCN-6 Excavator. Year of Manufacture: 2018. Specification: 14,400kg, Hydraulic Quick Coupler, Auxiliary Line, Boom & Dipper Check Valves, A/C, Heated Seat, Good Undercarriage Approximately 70% good. EPA & CE Machine. Working Hours: 5,900. Price: Euro 38,500 GBP ex works United Kingdom. Machine Location: West Yorkshire, United Kingdom Origin: The Netherlands, European Union. Minimum Order: 1 Unit Available. Shipping Terms: Ex Works United Kingdom. Price is Ex Works United Kingdom. We are happy to provide transportation & Shipping Prices should you require this. Payment Terms: 100% TT Before Shipping

1 x Used Hitachi ZX135US-6 Excavator. Year of Manufacture: 2018. Specification: 14,700kg, Hydraulic Quick Coupler, Auxiliary Line, Boom & Dipper Check Valves, A/C, Good Undercarriage of Approximately 70% good. EPA & CE Machine. Working Hours: 7,150. Price: �£39,500 GBP ex works, United Kingdom. Machine Location: West Yorkshire, United Kingdom. Origin: The Netherlands, European Union. HS Code: 8429 5210 Minimum Order: 1 Unit Available Shipping Terms: Ex Works United Kingdom. Price is Ex Works United Kingdom. We are happy to provide transportation & Shipping Prices should you require this. Payment Terms: 100% TT Before Shipping.