LED components, SMD, Lamp, Photcoupler, high/low power LED light.
Printed circuit boards.
LED light.
PCB, PCBA.
Quick turnaround prototype printed circuit boards, including conventional prototype PCBS of 2 to 42 layers, HDI, SBU PCBS, ic substrates, TFE teflon pcbs, thick board pro cards, flexible pcbs, rigid-flex PCBS, metal based PCBS, and heavy copper PCBS.Prototype PCB Fabrication
7.4v 2300mah li ion battery pack with plastic housing; Integrated with protection circuit module; Integrated with gas gauge ic; Output: positive, negative, 10k ntc
12v 10s1p 3.6ah nimh battery pack; Low-self discharge rate type Integrated with ntc, thermal protector, pptc Lead out 3 wires with connector
3.7v 200mah li polymer battery pack Integrated with protection circuit module Lead out 3 wires with connector
Rated voltage:¡k¡k¡k310 vac and 350vac, 50~60hz 1.Provides interference suppression, all safety approval 2.Overvoltage stress withstanding 3.Self-healing properties 4.Active and passive flame retardent Non-inductively wound with a metallized polypropylene film dielectric/electrode, encapsulated in flame retardant (ul94, v-0) plastic case and epoxy resin end seal.
40, 000 times per second of vibration. cut edge smoothly. two action control to correspond different workspace. reduce operation of fatigue. power output adjustable. easy use. handle knife well. 39cm*27cm*21cm weight 3.6kg
Spec:gurrent rating:3a Voltang rating:250v ac / dc Temperature range:-25¡æ to + 105¡æ (including temperature rise) Applicable wires:22~28 Type:terminal(contact) Material:brass 10000/pcs real
FC/PC D Adaptor Fully in compliance with telcordia gr-326 type connector specifications. Precision mechanical dimensions. Zirconia ceramic sleeve. Snap/latch mounting mechanism. 2000pcs in one carton, 56cm*26cm*37cm, 10.0kgs
Cable tie 100pcs/ Polybag
Multilayer ferrite chip beads Excellent in physical properties, such as terminal strength, flexure strengh, soldering resistance and solerability.
Multilayer chip inductors Monolithic structure for highly reliable surface mount applications. Excellent solderability and high resistance for either flow or reflow soldering. Superior q characteristics guaranteed over the wide frquency application.
Ni-Zn Soft Ferrite Cores Emi suppression generated from round cable used in digital equipment. Emi/rfi suppression, plus and matching transferor, choke, input filters
Antenna, pogopin, probe pin, test pin, spring pogo pin, metal connector and components.
Single Side : Maximum shipping Panel Size 470mm*570mm Finished Board Thickness : Minimum Board Thickness : 0.6mm+/-0.1mm , Maximum Board Thickness : 2.0mm+/-10% Dielectric Material : Heat Conductive Glue / FR4 Aluminum Type : 5052 Copper Thickness : 1/2~2oz Trace Width / Spacing : Minimum Line Width / Spacing(Internal&External) 0.1mm ,The tolerance followed by IPC-6012 Surface Finish : Immersion Gold(Ni/Ru) 0.025~0.1um /Lead Free HASL (Min. 2.5um)/OSP (Entek CU106A) 0.2~0.5um Solder Mask : LPI Test : Hi-Pot Test
Layers: FPC 1~4 L Finished Board Thickness with Copper : Min 0.075mm (1L) / Max 0.3mm (2L) Finished Board Thickness Tolerance: �±0.02~0.04mm Impedance Control :+/-10% Base Copper Thickness : Standard : 1/3oz,1/2oz,1oz / Spcial:2oz Base Film Thickness:Standard:0.5mil , 1mil / Special : 2mil Stiffener:PI / FR-4 /SUS Finished Hole Diameter:Min { }0.15mm / Max { }6.30mm Finished Hole Diameter Tolerance PTH�±3mil(�±0.075mm) npth�±2mil(�±0.05mm)
Layers : Sample 1~32 / Mass Production 1~20 Size :Max shipping size is 600mmx550mm , +/-0.15mm Finished Board Thickness: Min 0.4mm(4L)/0.6mm(6L),+/-0.1mm (Max) 3.6mm(2.2~3.6mm depends on material), +/-10% Copper Thickness :1/3~5oz (Depends on material) Impedance Control :+/-10% Via Holes (Min) : Mechanical Drill:0.2mm / Micro Via:0.1mm PTH+/-0.075mm NPTH +/-0.05mm Aspect Ratio : Sample :10:1 / Mass Production :8:1 Min Trace(Width/Spacing) : Internal 0.075mm / External 0.075mm The tolerance followed by IPC-6012 Advance Process : Blind Routing Cavity,Coil Board,Plug Hole With Epoxy,Half Hole Plated Spacing between Pads : Min :8 mil
