PCB, FPC, MCPCB, HDI PCB, PCBA.
Computer and PC monitor and TV form 15"-42, electronic IC.
7.4v 2300mah li ion battery pack with plastic housing; Integrated with protection circuit module; Integrated with gas gauge ic; Output: positive, negative, 10k ntc
3.7v 200mah li polymer battery pack Integrated with protection circuit module Lead out 3 wires with connector
It is not just an individual working unit to turn On/Off Switch to DC12-48V LED Light 0-100% dimmer, but also a great media to join a smart system via RS485 Modbus-RTU comm. port. It means, no matter for simple group LED lights dimming/control or for complicated smart system control, LC-01 is the best choice in market. *4-channel designed led light dimmer and controller is using pwm dimming technology to direct drive led lights, 1~5% dimming no flash concern *each channel max load current 4a (4 channels total output power 768w@48v), with Protection design against overload, short circuit and surges *independent working unit, able to extend working units in series for more channels dimming and control demand *isolate rs 485 and modbus-rtu communication protocal able to connect with hmi tft Touch panel or smart control system like system chart 4 to dim lighting range from fully off "0" to full-on "1000" for different lighting mode and environment change setting *4-channel isolate multi-function digital input able to work with existing or general power On/off switch for light on/off and 0-100% brightness dimming and to connect sensor for On-off, detain or group dimming setting *wide working voltage 12-48v dc, to ensure stable and continued electricity supply for led lights to extend the working life of led lights, industrial power supply working source is recommended *extend ports for remote control or sensor for smart control system *watchdog function supported *easy installation and set up, cost-effective, low maintenance cost, long working life of led and environment protection
Place of origin: taiwan Copper thickness: 0.45 mils - 14 mils Board thickness: 280 mils (max finished board) Inner line width:
Place of origin: taiwan Brand name: fr4, rogers, isola, etc. Copper thickness: 0.45 mils - 14 mils Board thickness: 280 mils (max finished board) Min. Hole size:
Place of origin: taiwan other gold, immersion tin & silver, & osp Maximum layer count, prototype: 40 or more layers Max. Board size: 18 x 24 inches Bow and twist: max 0.1% Drilled via size: 2 mils Annular ring: 1.5 mils Inner line width:
Place of origin: taiwan Base material: varied Copper thickness: 0.45 mils - 14 mils Annular ring: 1.5 mils Inner line width:
Place of origin: taiwan Laminate: fr4, rogers, isola, etc. old, immersion tin & silver, & osp Maximum layer count, prototype: 40 or more layers Max. Board size: 18 x 24 inches Bow and twist: max 0.1% Drilled via size: 2 mils Annular ring: 1.5 mils Inner line width:
Quick turnaround prototype printed circuit boards, including conventional prototype PCBS of 2 to 42 layers, HDI, SBU PCBS, ic substrates, TFE teflon pcbs, thick board pro cards, flexible pcbs, rigid-flex PCBS, metal based PCBS, and heavy copper PCBS.Prototype PCB Fabrication
Printed circuit boards.
Respiratory product such as anesthesia & breathing circuit, respiratory humidifier, nebulizer and oxygen mask..
Computer security products, printed circuit boards, UPS systems, pcb connectors, computers.E-business solutions
12v 10s1p 3.6ah nimh battery pack; Low-self discharge rate type Integrated with ntc, thermal protector, pptc Lead out 3 wires with connector
1CH video input, 6CH output Circuitry with individual and isolated complementary transistor pairs provides power for several 75 Ohm loads. Channels will not interfere with each other when short circuit occurs. 1pc/box, 10pc/2.3'
Sudden light should consistently light up for 45 seconds to shut off Infrared Color at daytime. Under low illumination or at nighttime, infrared activated immediately and system automatically switched to B/W Burst signal is switched off while shifting to B/W at nighttime Auto electronic shutter Y/C separated circuit designed, color signal is off at night Project distance 15M 17 Pills of high efficient LED 1pc/box, 20pc/2.72'
Allow a single monitor to display the output for one to eight cameras in automatic or manual sequence Each camera can be positioned in areas where user wants to surveillance The scene from each camera is displayed on the monitor for an operator-selected dwell time from 1 to 35 seconds. Green led lamps indicate the position number of the camera output bring viewed. Unused camera positions may be bypassed without changing the order of sequence or dwell time Designed to meet the needs of the small, basic closed-circuit video system user Housed in a heavy-gauge steel chassis and cover protected by an off-white textured baked enamel finish CV-123-8A is with Audio 1pc/box, 10pc/2.3'
LED mini downlight applies 6PCS high flux 5050 TOPLED. With great heat management and constant current circuit design, the downlight provides the LEDs in a reliable 120o lighting output suitable for either a vehicle usage or a spotlight device. Operating voltage from 10V to 15VDC.
LED channel light applies 18/36/54/72 high flux 3528 TOPLED. With great heat management and constant current circuit design, the aluminum channel provides the LEDs in a 120o emitting lighting profile suitable for either a vehicle usage or an illumination device. With 15mm width and 10mm height, it can be installed to where the space is low and limited. A slide switch is equipped to the edge to easily switch ON/OFF the light. Operating voltage from 10V to 15VDC. One serial link is set at 0.9A.