Description Self-adhesive membrane is high-strength PE based,combined with bitumen layers, forming rigid copolymer waterproofing sheets with high endurance. Use 1.Foundation and basement waterproofing 2.Flooring,roof deck waterproofing 3.Interior and exterior walls 4.Tunnels,reservoirs,sewage treatment tanks Feature 1.Easy apply, no torch equipment required 2.Self-adhesive,fast and easy application 3.Can combine with the structure as a whole, therefore prevent vapor transmission and expansion Series Product CP-107/Gravel,PE/Thickness : 2/3/4/5mm CP-108/Sandstone/Thickness : 2/3/4/5mm OP2100/PE/Thickness : 1.5mm XOP2101/Aluminum foil Layin plastic mesh/Thickness : 1/2/3/4mm XOP2102/MuLTILAYER PE& Aluminum/Thickness : 1/2/3/4mm
Code 83200: Non-woven adhesive bandage and retention sheet. Features 1. Non-woven fabric, and laminated with released paper. 2. Hypoallergenic adhesive leaves little or no residue. 3. Provides a strong adhesion, yet us easy to remove. 4. Porous and breathe Color: White Size: 5 cm x 9.14 m(2x10 yds) 10 cm x 9.14 m(4x10 yds) 15 cm x 9.14 m(6x10 yds) 20 cm x 9.14 m(8x10 yds) 30 cm x 9.14 m(12x10 yds)
Code 82200: Non-woven adhesive dressing with absorbent pad Features 1. Non-woven fabric laminated with released paper. 2. Hypoallergenic adhesive for sensitive skin. 3. Non-adherent film prevents absorbent pad from sticking to wound. 4. Porous and breathe Color: White Size: 4 x 6 cm (1.6''x2.5'') 10 x 15 cm (4''x6'') 6 x 7 cm (2.5''x2.8'') 8 x 10 cm (3''x4'') 10 x 20 cm (4''x8'') 10 x 25 cm (4''x10'') 10 x 30 cm (4''x12'')
Code 82220: Non-woven adhesive dressing with absorbent pad Features 1. Non-woven fabric laminated with released paper. 2. Designed for thumbs,toes, finertips and finger joints where bandages do not hold well. 3. Individually wrapped and gamma sterilized. Color: White Size: 4.5 x 5 cm (1.8''x2'') 3.8 x 7.6 cm (1.5''x3'')
Code 82240: Eyepad for non-woven adhesive dressing with absorbent pad Features 1. Non-woven fabric laminated with released paper. 2. An additional layer of non-woven and black film specifically designed for amblyopic vision treatment. 3. Hypoallergenic adhesive leave Color: White, flesh Size: 5 x 6 cm (kid) 5.8 x 8.3 cm (Adult) Pad type: black/nonwoven pad cotton pad
Code 82230: Non-woven adhesive dressing with absorbent pad Features 1. Non-woven fabric laminated with released paper. 2. Designed for elbows and knees where bandages do not hold well. 3. Individually wrapped and gamma sterilized. Color: White Size: 8.5 x 12.5 cm (3.3''x5'') 10 x 16 cm (4''x6.3'')
Code 82600: Non-woven adhesive dressing with absorbent pad Features: 1. Non-woven fabric laminated with released paper. 2. Hypoallergenic adhesive for sensitive skin. 3. Non-adherent film prevents absorbent pad from sticking to wound. 4. Porous and breathable. 5. Individually wrapped and gamma sterilized. Color: White Size: 6 x 7 cm (2.5''x2.8'') 10 x 10 cm (4''x4'') 10 x 15cm (4''x6'') 10 x 20 cm (4''x8'') 10 x 25 cm (4''x10'')
Code 85200: Made of non-woven fabric. Hypoallergenic adhesive, leaves little or no residue Features: Made by non-woven fabric. Hypoallergenic adhesive, leaves little or no residue. Porous and breathable. Strong adhesion, yet easy to remove. Color: White or flesh Size: 1.25 cm x 9.14 M (1/2x10yds) 2.50 cm x 9.14 M (1x10yds) 5.00 cm x 9.14 M (2x10yds) 7.50 cm x 9.14 M (3x10yds)
Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water Material: PU Shape: Round-cut or angle-cut Size: 4 x 4 cm (1.6''x1.6'') 6 x 7 cm (2.4''x2.8'') 10 x 12 cm (4''x4.8'')
Code 89300: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water Material: PU Shape: Round-cut or angle-cut Size: 4 x 4 cm (1.6''x1.6'') 6 x 7 cm (2.4''x2.8'') 10 x 12 cm (4''x4.8'')
Code 89600: Adhesive transparent PU film for wound protection from water, dirt & germs Features: 1. Transparent PU film, coated with hypoallergenic adhesive. 2. Strong adhesion yet easy to remove that leaves little or no residue. 3. Waterproof but air permeable, it shields out water, Materialï¼? PU film Size: 6 x 7 cm (2.4''x2.8'') 10 x 13 cm (4''x5.1'')
Code 85300: Made of polyethylene with acrylic coating. Features Made of polyethylene with acrylic coating. Hypoallergenic adhesive, leaves little or no residue. Porous and breathable. Perforated for easy tearing by hand. Thin, flexible and strong adhesive Material: Polyethylene Size: 1.25 cm x 9.14 M (1/2''x10yds) 2.50 cm x 9.14 M (1''x10yds) 5.00 cm x 9.14 M (2''x10yds) 7.50 cm x 9.14 M (3''x10yds)
Code 86310: Cannula fixation and injection plaster. Non-woven adhesive dressing with absorbent pad Features 1. Sterile and adhesive as required for firmly securing cannulas used for hypodermic injections. 2. Laid on a non-woven hypoallergenic backing to be fitted with a central pad which facilitates the introduction of the hypodermic needle. 3. Waterproof but air permeable-shielding out water, dirt and germs. Color: White Size: 6x8 cm
Code 82700: Moisturizes, lightens the scar, hypoallergenic Features 1. Flesh color silicone sheeting with hypoallergenic adhesive. 2. Snug-fitting, washable and reusable for more than 15 times. 3. Pain-free and easy removal. Size: 1 cm x 10 cm x 1 sheet Material: PU, silicone gel
PS-SAFE23 has unique feature as it can stick the styrofoam material. It does not contain toluene and formaldehyde that contribute to smog in cities and industrial area. This is the only contact adhesives with 36.5% solid. It's cost effective with the highest active ingredients. PS-SAFE23 is made of tough elastomeric rubber, tackifying resins and solvent with least odor without toluene . Unique feature as it can adhere the styrofoam material Strong grab on contact with higher green strength Excellent water resistance as it immersed in water for 3 months without adhesion failure. Very Low odor without toluene and MEK
Description CS-264 is the latest innovative Contact adhesive using our home-grown technology. This is the only Contact adhesives with 50% solid. It's cost effective with the highest active ingredients. Less solvent less health hazard. CS-264 is made of tough elastomeric rubber, tackifying resins and solvent with least odour without toluene. Features Faster sticking Contact Adhesive within 5 minute. Strong grab on contact with higher green strength. Paintable when dried. Easy to extrude even at -15 C , most suitable for all season. Very Low odour without toluene.
Description CS-261 is a acrylic sensitive adhesives. It has good initial tack, suitable for the adhesion of PVC tile. It is easy to use. Application CS-261 can be used in decoration, PP to paper,PVC to non-woven fabrics industry.
APPLICATIONS & CHARACTERISTICS 1. High bonding strength and easy to brush. 2. It can be applied for many materials, such as wood, PU leather, sponge and cloth etc. 3. Water based, green product. PHYSICAL PROPERTIES : 1. AppearanceBeige liquid 2. Main ComponentWater-based neoprene. 3. Solid Content 52± 2% 4. Viscosity 4500 5500 cps (25, LVT) 5. Shelf Life 6 months
Description Wallpaper adhesive is a high quality, easy to mix adhesive. It is easily spread with excellent slip properties for accurate positioning and longlasting results. Suitable for hanging all wallpaper types. Features â?? This product is made of natural cassava flour after gelatinization and modification, and added with water resistance additives. It has high adhesiveness and is not easy to hydrolyze after film formation. â?? It can be used in cold water. Its characteristic of dispersing first and then dissolving makes it difficult to form fish eye colloid under a large amount of powder. â?? Non-toxic, tasteless, easy to clean. â?? During use, the amount of water can be increased or decreased according to the characteristics of the material to control the adhesion. Application 1. Wallpaper adhesive. 2. Poster. Stamp adhesive. Precautions 1. If bubbles are generated during the mixing process, they must wait for the bubbles to disappear before they can be used on the material 2. The mixed colloid cannot be stored for too long, it is recommended to use it up within 3 days 3.If the colloid that has been stored for too long has a peculiar smell, there will be black hair and yellow on the side of the barrel or the surface of the colloid. It cannot be used and needs to be re-modulated Package 5kg/barrel (20L barrel. Plastic bag inside) 35kg/barrel (big blue barrel, lined with plastic bag)
DESCRIPTION CC-301(54) is 1 K aromatic moisture curing PU adhesives, it can be used as a waterproof primer for cement. CC-301(54) has excellent bonding strength, weather resistance, hydrolysis resistance after fully curing. (about 3 days. ) TECHNICAL DATA Appearance : light yellow transparent liquid Component PU : pre-polymer Viscosity : 700-900 cps Solid Content : 100% Shelf Time : 6 months OPERATION 1. Put CC 301(54) onto the cement, then used a roller to coat on the cement. 2. After first coating has already tack free (about 1 hour), the second coating can be applied immediately. 3. After fully curing ( a bout 8 24 hours), the top coating can be applied.
