Multi Connector Combination IL & RL requirement. Customized specification
Internal and external board connector and cable assemblies 1 x 1, 1 x 2 and 1 x 4 connector/cage assemblies flexibility system speeds increase from 6 G to 12 G Metal cages provides EMI shielding Cable latch design Hybrid external cables (Mini-SAS HD to Mini-SAS) allow for backwards-compatible.
Maximum link rate to up to 20 Gbps/lane and features more efficient 128b/132b channel coding, delivering a maximum payload of 77.37 Gbps First standard to support 8K resolution (7680 x 4320) at 60 Hz refresh rate with full-color 4:4:4 resolution. Enhanced EMI and RFI Application: Consumer Application as PC, TV, Monitor, Tablet.
Cable Length ft 20 Color Black Side A Connector 1 HDMI MALE Side B Connector 1 DVID SINGLE LINK MALE Product Warranty Period Worldwide Lifetime limited warranty Application Consumer Application as PC TV Monitor Tablet
Data rates : 56G-PAM4/ 25G-NRZ Maximum data rate: 400Gb/s (8 x 50Gb/s) Connector Compliant with QSFP 28 SFF 8665 Low Power Consumption
OM3 fiber optic cable is designed to accommodate 10 Gigabit Ethernet up to 300 meters. OM3 Fiber compatible with Gigabit Ethernet 1000Base, or 10GBase, and Fibre Channel. IL & RL requirement. Customized specification
Support USB Type-C Alternate Mode Support 2 lane or 4 lane signal channel Support Plug & Play, no extra drivers needed Built-in Billboard functions Application: Consumer Application as PC, TV, Monitor, Tablet.
Waterproof Sealed (IP67 & IP69K)/Un-Sealed 1. Jack Straight to Jack Straight Cable 2. Jack Straight to USB 2.0 3. Vertical Plug 4. Right Angle Plug
Lost wax casting, casting, parts, valves, pipe, impeller, pressure transmitters, flow meters, coupling, cylinder, magnet, mechanical machining, electronic component, rubber mat, rubber.As a trading and familiar with the market in Taiwan, Japan and China, with creative breakthrough systems over the traditional trade patterns, providing professional services such as data configuration and gathering, market analysis, procurement, product design, and product packaging & marketing to buyers all over the world.
diameter 2~30mm, NBR, EPDM, FPM, Neoprene, packed on spools.
Features - Full-duplex active optical cable - Up to 10.3125Gb/s per channel - Hot-pluggable SFP+ MSA-compliant connectors - 1W maximum power dissipation per end - Built-in digital diagnostic functions - Commercial operating case temperature range: 0 to 70�°C - RoHS-6 compliant (lead free) Applications - High performance computing interconnect - 10G Ethernet interconnect
Features - Transmission data rate up to 25.78Gbps - 850nm VCSEL laser - PIN photo-detector - Internal CDR on both transmitter and receiver channels - Low power consumption < 1W - Hot-pluggable SFP28 form factor - Up to 70m on OM3 MMF and 100m on OM4 MMF - Digital diagnostics functions are available (optional) - Operating case temperature range 0�°C to +70�°C - 3.3V power supply voltage - RoHS-6 compliant Applications - IEEE 802.3by 25GBASE-SR
Features - QSFP28 End: Compliant with QSFP28 MSA specifications - SFP28 End: Compliant with SFP28 MSA specifications - 4 independent duplex channels operating at 25Gbps - AC coupled inputs and outputs - 100 Ohm differential impedance - All-metal housing for superior EMI performance - Single power supply 3.3V, low power consumption - RoHS Compliance - Operating temperature range: 0ï?°C to 70ï?°C. Application - 100Gigabit Ethernet - Infiniband EDR - Serial Data Transmission - Networking - Storage - Fiber Channel
Features - Compliant with SFF-8665/SFF-8679 - Compliant with IEEE 802.3bj - 4 independent full-duplex channels - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Low insertion loss - BER better than 10-15 - Operating temperature: -5~+70â?? - RoHS compliant Applications - 40G/100G Ethernet - Infiniband, QDR/EDR
Features - Compliant with SFP+ MSA - Compliant with SFP MSA (INF-8074i) - Support for multi-gigabit data rates up to 10.5Gbps - Support for 1x, 2x, 4x and 8x Fiber Channel data rates - Hot Pluggable SFP 20PIN footprint - Serial ID module on MOD(0-2) - AC coupling of PECL signals - EMI/EMC performance - Low Power consumption
Features - 4 independent full-duplex channels - Up to 11.2Gb/s data rate per channel - MTP/MPO optical connector - QSFP+ MSA compliant - Digital diagnostic capabilities - Up to 100m transmission on OM3 multimode ribbon fiber - CML compatible electrical I/O - Single +3.3V power supply - Operating case temperature: 0 to 70oC - XLPPI electric interface - Maximum power consumption 1.5W - RoHS-6 compliant Applications - Rack to Rack - Data Center - Infiniband QDR, DDR and SDR - 40G Ethernet
Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-LW/LR - 1310nm DFB transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes
Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-SW/SR - 850nm VCSEL transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes - Inter Rack Connection
The 100G optical transceivers series include different form factors such as QSFP28 and CFP4. Optechâ??s 100G Transceivers includes QSFP28-SR4, QSFP28-LR4, QSFP28-ER4, QSFP28-BIDI, QSFP28-PSM4 and QSFP28-IR4. It offers connecting solution from 100m to 40km for data centers, high speed network and 5G. The name of the 100G QSFP28 comes from the fact that its electrical interface can handle four channels of 25G each, potentially up to 28G. Features - Hot pluggable QSFP28 MSA form factor - Compliant to IEEE 802.3ba 100GBASE-LR4 - Supports 103.1Gb/s aggregate bit rate - Up to 10km reach for G.652 SMF - Single +3.3V power supply - Operating case temperature: 0~70â?? - Transmitter: cooled 4x25Gb/s LAN WDM DFB TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) - Receiver: 4x25Gb/s PIN ROSA - 4x25G electrical interface (OIF CEI-28G-VSR) - Maximum power consumption 4.0W - Duplex LC receptacle - RoHS-6 compliant Applications - 100GBASE-LR4 Ethernet Links - Infiniband QDR and DDR interconnects - Datacenter and Enterprise networking
Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Supports Links up to 30m using Cat 6a/7 Cable - Compliant with IEEE 802.3az - Compliant with SFF-8431 and SFF-8432 MSA - Low Power Consumption (2.5W MAX @ 30m) - Auto-negotiates with other 10GBase-T PHYs - I2C 2-Wire Interface for Serial ID and PHY Register Access - Auto-sense MDI/MDIX - RoHS Compliant - Operating temperature range: 0 C to 70 C Applications - 10 Gigabit Ethernet
