Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Supports Links up to 30m using Cat 6a/7 Cable - Compliant with IEEE 802.3az - Compliant with SFF-8431 and SFF-8432 MSA - Low Power Consumption (2.5W MAX @ 30m) - Auto-negotiates with other 10GBase-T PHYs - I2C 2-Wire Interface for Serial ID and PHY Register Access - Auto-sense MDI/MDIX - RoHS Compliant - Operating temperature range: 0 C to 70 C Applications - 10 Gigabit Ethernet
Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability. Features - compliant with ieee802.3z - gigabit ethernet standard - compliant with ieee802.3ae 10gbase - compliant with sonet oc-192 sr-1 sdh stm i64.1 - class 1 laser product complies with en 60825-1 - rohs compliant Applications - telecommunications - datacenter - network interface - test and measurement equipment
Optechs 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * 8 parallel lanes on 850nm center wavelength * Compliant to IEEE 802.3bs Specification * Up to 100m transmission on multi-mode fiber (MMF) OM3 with FEC * Operating case temperature: 0 to 70�°C * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 53.125Gbps (PAM4) per channel. * Maximum power consumption 12W * MPO-16 connector * RoHS compliant Applications * Data Center Interconnect * 400G Ethernet * Infiniband interconnects * Enterprise networking
Definition of 400G QSFP-DD Transceivers QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Multi-mode Transceivers Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver. 400G QSFP-DD SR8 The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA. Single-mode Transceivers Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance. 400G QSFP-DD DR4 The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD DR4+ The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD LR4 The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD Loopback The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
Features: -Support HD video 1080p and PC 1920 x 1080 @ 60Hz resolution. -Based on Gigabit IP Ethernet, all standard -Gigabit or Fiber LAN switches can be used for inter-connection. Easy cabling, easy installation, and easy maintenance. -Support One-to-One (Uni-Cast) and One-to-Many (Multi-Cast) applications. -Support 4 x USB over IP devices for the KVM extension, you can attach keyboard, mouse, storage, speaker, microphone at the Receiver site to control the PC at the Transmitter site. -Built-in USB sound card, you can directly connect speaker and microphone on the Receiver. -Both HDMI and VGA Receivers are available, it is possible to mix HDMI Transmitter with VGA -Receiver in the same network. -Support IR and RS232 options, you can use the IR remote controller at Receiver site to control the set-top box at the Transmitter site. -Support remote ON/OFF option, you can remote switch ON/OFF at the Receiver site to the PC at the Transmitter site. -Pure hardware design, plug-and-play, no additional software installation is required. -Windows based Management Software is available for TX/RX connection management. Material: Metal Weight: 625 g Dimension: 191x122x35 mm.
Deliver Power up to 328ft (100m) Plug and Play installation Max 30W output power Simplified the installation of Ethernet based devices Compliant with IEEE802.3at Auto Detection and protection of non-standard Ethernet terminal . 20pcs/Carton.
Deliver Power up to 328ft (100m) Plug and Play installation 8 ports PoE Simplified the installation of Ethernet based devices Auto Detection and protection of non-standard Ethernet terminal Pass Through Data Rates : 8-Port 10/100 Mbps. 5pcs/Carton.
Deliver Power up to 328ft (100m) IEEE802.3af Standard compliant Plug and Play installation Output Voltage selectable (5/9/12V) Simplified the installation of Ethernet based devices. Enable the non-PoE devices get power from PoE Switch.
Deliver Power up to 328ft High-speed data transfer of up to 200Mbps via electrical wiring Enable data transmission through existing home power grid Smart power saving technology for improved power efficiency Provides a noise-filtered Compliant with the HomePlug Powerline Alliance industry specifications 4 Ports 10/100Mbps Ethernet Switch (PL-204) Utmost slim and light design Ideal for residential users.
Network Investigation Toolkit (NIT) Network Investigation Toolkit (NIT) is designed specially by Decision Group for LEA such as Police, Military, Criminal Investigation Agencies, National Security Agencies, Cyber Security Agencies, Counter Terrorism Department, Forensics Investigator etc. to conduct network based forensics investigation whether it is on a Wired or Wireless LAN networks. NIT is a portable unit (laptop based) with comprehensive network forensics features which can be carried at any location for network based investigation task. NIT can be used to intercept on targeted networks or users to collect the necessary evidences and trace out the source of communication. The unique capability of this system is its combination of various features and functions to conduct LAN real-time interception, WLAN real-time interception, HTTPS/SSL MITM interception on both LAN and WLAN networks as well as offline analysis and reconstruction of pre-captured raw data files. The 3.5G/HSDPA USB Adapter is included in the package for user to remote access and manage the system.
Features The series of the HDMI Amplifier Splitter have many features that enable them to perform in a superior manner. Among those features you will find: Switch easily between any four HDMI sources Distributes any of the four inputs to any or any combination of the two HDMI output displays Maintains high resolution video-beautiful, sharp HDTV resolutions up to 1080p Discrete IR remote (included) HDMI support 1.3b HDCP support 1.0/1.1
Printers, computers , hard drive, printer toners, printer inks.
Cable, computer accessories, networking, telecommunication.
In-vehicle communication gateway High Performance (iMX6 Dual Cortex-A9) processor supports Android, YoctoSupports Android, Yocto ï?? Rich I/O interfaces (USB2.0, GPIO, Ethernet, I2C, GPIO, CAN bus, HDMI, etc.) 3G/LTE module, GPS receiver, WiFi/BT, G-sensor, Isolated GPIO +9V ~ +36V wide DC input and (optional) over-voltage/reverse-voltage protection Typical Applications In-vehicle computer Vehicle black box Fleet Management IOT gateway
Standard Current 3A, support USB Power Delivery up to 5A with 5/12/20V Support up to 10Gbps data rate. Enhanced EMI and RFI.
TypeHybrid ConnectorUSB Type C to C Cable Length125m Cable OD50mm USB30 Bit rate10Gbps USB20 Bit rate480Mbps Power DeliverNA ALT ModeNA
Type C compatible Fit customer end-using mechanism. locking screw design.
HDMI 1.4/2.0/2.1 options. Latest HDMI2.1 support up to 4K/8K/10K. Data rate up to 48Gbps. Enhanced EMI and RFI.
DSUB Connector Compatible Fit customer end-using mechanism. lockable design. Special Pin Define with additional DC Jack. Application: Industrial
Designing and manufacturing a full range of cables for consumer electronics, such as USB 3.0, TYPE C and HDMI 2.1 series.
