Hvlp turbine spray gun, suitable for both hvlp spray turbine system and hvlp spray tan system. Both non-bleed and bleed are available Professional spray gun features rear pattern control knob to adjust size of fan pattern from small to large Insulated stay-cool handle Stainless steel needle and nozzle
L.V.L.P. Gravity-feed spray gun achieves superior atomization and performance, great for painters who want all the benefits of hvlp but with less air requirements Automotive or wood painters who do not have a large air compressor, l.V.L.P. Spray gun may help achieve a professional finish and paint an entire car or very large surfaces Transfer efficiency over 75% (3%-5% higher than hvlps) of putting the paint onto the surface being coated. Very little overspray will be produced, saving on paint cost and environmental hazards. Nozzle set is 100% strictly hand- checked to ensure the finest atomization , fluid nozzle and needle are made of stainless steel, air cap is made of brass for ensuring a long lifetime. Water-borne paint materials qualified
!e Conventional gravity- feed spray gun, suitable for automotive refinishing painting and industrial applications !e Nozzle set is 100% strictly hand- checked to ensure the finest atomization , fluid nozzle and needle are made of stainless steel with hardened treatment , air cap is made of brass for ensuring a long lifetime. !e Water-borne paint materials qualified
H.V.L.P. Gravity-feed spray gun, suitable for industrial applications and automotive refinishing Nozzle set is 100% strictly hand- checked to ensure the finest atomization, fluid nozzle and needle are made of stainless steel with hardened treatment , air cap is made of brass for ensuring a long lifetime Transfer efficiency above 70% to save significant paint material ( about 25% saved comparing to conventional spray guns ) Less than 10 psi air pressure exhausting from the air cap to meet the requirement by environmental protection legislation. Water-borne paint materials qualified
Reduced pressure gravity-feed spray gun, it perfectly combines speed of working with large spray pattern sizes and fine atomization for the clear coats, single layer top coats and primers, fillers and surfacers. One of the newest technology on the market, it is also called trans-tech ( transfer-efficiency technology ). Suitable for those professional painters who want the best balance of fast working speed, superior atomization for clears and flat colors and super low overspray levels Nozzle set is 100% strictly hand- checked to ensure the finest atomization , fluid nozzle and needle are made of stainless steel, air cap is made of brass for ensuring a long lifetime. Water-borne paint materials qualified
Used combine harvester, Kubota, Yanmar Quality and after-service for -made Kubota harvesters
Power sprayer, pressure washer, sprayer parts.
Air spray gun.
Seeds and new innovations.
*max. Working width(cm): 100 *max. Outer diameter(cm): 80 *with cutting device *with t-leg *dia.(cm): 137 x 83 x 125 1pcs/ctns
Mini tube cutter For 1/8" to 5/8" o.D.Tubing. 200 pcs/ctn.
1.) 36cc Powerful Quiet Running Engine. 2.) 2-Cycle Engine - with Dual Piston Rings and Chrome-Plated Cylinder for Longer Engine Life. 3.) 17" Cutting Swath. 4.) 12" 2-tooth Steel Reversible Cutter Blade, Nylon Cord Head & String Included. 5.) Pro-Style Straight Shaft for Easy Trimming Under Shrubs and Low Branches. 6.) Limited Two Year Factory Warranty. 7.) Safe Drive Clutch Plus Fast Start primer for Faster Cold Starting. 8.) Adjustable Bike-handle. Light Weight Design for Easy Use and Handling. 9.) Rugged 2-Cycle Trimmer is Built for Endurance. 10.) Fast and Efficient Tirmming Around any Garden. 11.) Heavy Duty Bearings for Improved Power Transfer Packing (Standard seaworthy): 1pc 2 carton 1.) Packing Size: (4 pcs) Engine Carton: 50 x 33 x 70 cm Shaft Carton:157 x 19 x 26 cm 2.) Net Weight/ Gross Weight (4 pcs): Engine Carton: 15/ 15.7kg Shaft Carton: 13/ 13.7kg 2.) Packing Quantity: 510pcs/20" FCL Container 1020pcs/40" FCL Container
Water pump, high pressure pump, triplex industrial pump, agricultural power sprayer, mist blower, fogging machine, cultivator, brush cutter.
Specification: Model: WN-3010H - WN-4510H - WN-6010H Voltage: 110V/220V - 110V/220V - 110V/220V Power (watt.): 1540W 14A - 2400W - 2900 W Max. sealing: 300 *10mm - 450 *10mm - 600 *10mm Heating Time: 0-1.5 sec - 0-1.5 sec. - 0-1.5 sec. Max. Temp.: 250°C - 250°C - 250°C Dimension: 58*13*27cm - 73*13*27cm - 88*13*27cm Weight: 9.6KG - 12KGS - 14KGS Features: Hand operation. Impulse sealing with electronic control. Easy to operate. Sealing width: 10mm Suitable : PE, PP, OPP, PVC, POF …plastic materials. Sliding Cutter optional. Easy to carry with a handle.
Agriculture items.
*Brand: INOVYN-Ineos *K-VALUE 65-68 *Near Prime *Packaging: original packing and cardboard boxes
EVA *Prime *Brand: Versalis ML50 *Packing: Original bag
GP-1 twist drill sharpener Drill Diameter: 2-13mm Point Angle: 90 - 140 degree Power Supply: AC110V/AC220V. Weight: N.W. 7KG/ G.W.:8KG Machine Size: L280*W133*H155mm Packing Size: L330*w205*H225mm.
Reinforced Frame: Strong structure for outdoor movement. Water Tank: Work without constant water supply. Rotational Fan: Horn-shape fan concentrates the air flow. Adjustable wind velocity and height enlarge the working area for different environments. Float Valve: Automatic water supply controller inside the water tank. Drought Switch: Automatic shutdown and alarm to protect the pump when water tank is dried out. Overload Protector: Automatic shutdown to prevent damage of motor when current is overloaded. TEFC Pump Motor: Totally enclosed motor ensures electric safety from moisture. TEFC Fan Motor: Totally enclosed motor prevents danger caused by moisture. Model: Air-16L Output: 5 nozzles Pressure: 1000 PSI (70 BAR) Horsepower: 1/3 HP 18' rotating fan (3 speed) Dual filtration system Voltage: 110V/60Hz; 220V-50Hz/60Hz RPM: 1450 / 1750 Dimension: 78 x 63 x 157~208 CM Weight: 58 KG
Reinforced Frame: Strong structure for outdoor movement. Water Tank: Work without constant water supply. Rotational Fan: Horn-shape fan concentrates the air flow. Adjustable wind velocity and height enlarge the working area for different environments. Float Valve: Automatic water supply controller inside the water tank. Drought Switch: Automatic shutdown and alarm to protect the pump when water tank is dried out. Overload Protector: Automatic shutdown to prevent damage of motor when current is overloaded. TEFC Pump Motor: Totally enclosed motor ensures electric safety from moisture. TEFC Fan Motor: Totally enclosed motor prevents danger caused by moisture. Model: Air-16L Output: 5 nozzles Pressure: 1000 PSI (70 BAR) Horsepower: 1/3 HP 18' rotating fan (3 speed) Dual filtration system Voltage: 110V/60Hz; 220V-50Hz/60Hz RPM: 1450 / 1750 Dimension: 78 x 63 x 157~208 CM Weight: 58 KG
