Cnc lathe sl12 Capacity: Swing over bed phi 330 Swing over slide --slide gang type phi 136 / turret phi 135 Max. Machining diameter x length: slide gang type phi 135x150/ turret phi128x130 Machine body: Slant angle of bed 45x X-axis--- slide gang type 230 / turret107 Y-axis---slide gang type 230 / turret 203 Servo motor x-axis1.4 kw / z-axis 1.4kw Rapid traverse rate each axis-- x-axis30m/min / z-axis m/min Spindle Diameter of spindle front bearing bore phi80 Diameter of spindle bore/bar capacity phi 45/phi 35 Spindle nose type asa a2-5 Taper of spindle bore 1/20 Spindle motor 5.5/7.5kw Drive motor Coolant motor 1/4hp Hydraulic motor 1hp Chip conveyor motor 1/4hp
Fe32 heavy duty precision lathe: High tensile ribs structure lathe bed, high precision and wide bed surface. Fe series is equipted with one-piece integrated structure and lathe bed enhances the machine life working performance. Features: 1. Large bore spindle--supported by 3-point precision bearings. Suitable for heavy-duty cutting. 2. Universal gear box design--able to cut metric thread, imperial thread, module thread without change gears. 3. Headstock--all gears and mandrel are made of alloy steel with heat treament and precision ground. Rotating type speed change system is easy to operate. 4. Apron and saddle--easy-operated overload protectsafety device. Central lubrication system can be operated manually or automatically. 5. Tailstock--with speed reduced quill suitable for heavy duty drilling, hand wheel is with dual dial. 6. Emergency brake system--more safe emergency brake system can shut off power supply simultaneously. 7. Fast feed and auto skip-off--apron has designed with cross and transversal fast feed and auto skip-off device. 8. Auto longitudinal stop--auto longitudinal travel device will control the feed of tool post.
Precision high speed lathe cl400: Swing over bed phi-400, Swing over cross slide phi 245, Swing over gap phi 585 Width of gap from face plate a1-5:203,d1-5:188 Spindle bore phi 45, Spindle nose asa a1-5(asa d1-5 option) Taper of spindle bore: 1/30 taper Taper of center: m.T. No.3 Numbers of spindle speed 6 Spindle motor 3.75kw(5hp)4p Tool slide--compound rest 125 Cross slide travel 215 Tailstock--diameter of quill phi 52 Quill travel 140 Please visit our website at www(dot)fenghsing(dot)tw for product details. Welcome distributors and re-sellers.
Precision High Speed Lathe--CL480/560: Spindle bore Phi 58 Taper of spindle bore M.T. No.6 Taper of center M.T. No.4 Stage of spindle speed 12 TOOL SLIDE: Compound rest travel 150, Cross slide travel 265 TALSTOCK: Diameter of quill Phi 65 Quill travel 150 Taper of center M.T No.4
A. As for the fluting type which can be connected with e-b-c-a-f-g flute, we also can make any type of the flute and cut-off size for the machine that customer required. B. Upper and lower corrugated roller, pressure roller, pre-heater roller are through by air cylinder. Set up steam recovery system. C. Oil immersed type gear box driven directs the lower fluting roller, pressure roller, glue roller and doctor roller performed by steam. Single drive mechanism to avoid glue sticking to roll surface when stopping. D. The motion of the upper corrugated roller, pressure roller and glue roller are operated by the hydraulic cylinder. Set up a hydraulic unit control. E.Designed by fingerless with a vacuum blower by positive pressure to keep fluting profile then glue. F. The single facer to use cassette quick change flute profile and change cassette within 20 minutes, the steam joints and drive clutch also adopted quick change device in order to saving the time to change flute and machine stop. Price, delivery time, moq are negotiable, please contact us for quotation.
A. The orders changed of size fastest in approximately 3-7 seconds to get pre-setting position. And provide 99 memories pre-setting for order change at any time also accommodatingly in the production management system. B. The machine has installed precision liner slides and ball screw bearing with encoder to get accurate position. The precision allowance within 0.5 mm to adapt of accuracy requirement various processing factories. C. The upper scoring wheels is single convex type. It can be replaced destruction wheels to used. The upper and lower scoring wheel has equipped 3 types: convex to convex, convex to concave and convex to flat . Selected by switch button. Operate easily. D. Front scoring units affirmed to rear scoring units, the scoring distance of board to achieve the random size. E. The round razor type slitting knives. It can slit cardboard orderly and pretty. The minimum slitting edge is 3~5mm. F. Automatically grind and lubricate without removing slitting knives and extended the life of knives. G. Lubricant device is fixed by level feeding system which volume control very accurately and no waste even no any pollution to the board and environment Price, delivery time, moq are negotiable, please contact us for quotation.
Automatic horizontal baling press tb-070840 has 35 or 50 tons pressing force and 3.5~4.5 tons per hour capacity with 40hp(30kw)motor and 150(or 180)mm ram cylinder. It's suitable for scrap materials like smaller paperboards, trimmed papers or plastic films. There is a door opening in the middle of the machine to be fed the waste materials. It can be customized according to the user's requirement. Customers can choose the convenient way of feeding from air cyclone, conveyor or manual.Tb-070840 is very functional and useful for recycling collectors and paper manufacturers especially with lower capacity demand and small scale. We had designed a hopper in the middle of the machine to be fed the waste materials. It can be customized with different demand. So users can choose the way of feeding from air cyclone, conveyor or manual. Furthermore, all of the tb-0708 series have the initiative twin-cylinder and trouble-free isolated twisters which can tie the bale automatically.
Automatic horizontal baling press tb-050510 series can compress shredded paper or plastic films. It's constituted by 10hp(7.5kw) motor, 125mm ram, 25 tons press force, and the capacity is 1.5 tons per hour. It's designed for various paper makers with small plant and low capacity demand. Tb-050510 was fabricated with rigid body which can make it very durable. Also, it has strong power including hydraulic unit, cylinder and 3 ways neck tension to compress loosely waste papers into tightly bales.
Automatic horizontal baling press tb-1011 sereis is constituted by dual motors(from 40~75hp), 100 tons press force(140 tons also available). It has a capacity from 10~18 tons per hour and makes the bale weight up to 1 ton. This paper baler can be used for baling a wide range of objects such as carton boxes, corrugated papers, magazines, cardboards....Etc. Suit for general recycler who need great capacity.
The feature of the automatic horizontal baling press tb-0911 series are initiative twin cylinder and trouble-free isolated twisters that can tie the bale automatically and make the user to operate it easily. Tb-0911 series is constituted from 30 to 80 motor, 200mm or 225mm ram cylinder, 63 or 80 tons press force, and with 4~12 tons per hour capacity. There are sereval kinds of waste materials can be fed including carton boxes, corrugated papers, magazines, cardboards....Etc. It is a good choice for paper mill who need large feeding aperture or greater capacity, and for the recycler who had smaller capacity.
Vertical waste baling press Compact in small floor area 1.High speed cycle time with strong pressing force 2.With retaining claws 3.With auto bale ejecter 4.Safe and easy operation
Single facer
Mini milling machine Chiung yang has strived to produce powerful milling machines for over 20 years and won praises due to the stable quality and rapidly product delivery in taiwan . Our milling machineis applied to proces household hardware, such as bicycle parts, small accesories and so on. We have several models available for different working duties and customizing current products to fulfill customer special needs. Cy-mm-1/3 Suitable for procesing small hardware item . Type cy-mm-1/3 Machine height 850mm Working surface of table 415 x110mm Max.Transversal travel 120mm Max. Longitudinal travel 160mm Max. Vertical travel 150mm Max. Cutter outside diam 130á· Max. Cuttetr length 100mm Max. Cutter thicknes 2 Drive motor 1/2hp Mandrill Number of spindle speeds 550 340rpm Machine weight 110kg Measurement-0.1 500x600x900mm Measurement-0.1 500x600x900mm
Vturn-36 Swing over bed : 650 mm Std. Turning dia. 445 mm Max. turning dia. 550 mm Swing over carriage: 500 mm Center distance: 890 mm
China origin high speed vertical CNC Machining Center
Year: March 18, 2003 Made in Taiwan Quantity: 3 Unit Price: FOB Taiwan port USD 28,500 Model: EV-10 Controller: Fanuc 0-MD S.N.: E03050, E03051, E03052 (M7, M8, M9) Travel: X: 1000 mm Y: 500 mm Z: 500mm Speed: 8,000 rpm Weight: 5545 kg ATC #: 24 Precision: 3·g Remarks: Swing arms, linear glides
Year: 9 years old Still running, estimated date of being replaced in the end of february 2005. Model: MCV - 900 made in Taiwan, hard track, suitable for making moulds. Travel: X-axis 900mm Y-axis 500mm Z-axis 500mm Controller: Mitsubishi 520 Precision: 0.03mm Quantity: 1
Model_345-EDM-ZNC Function: 50A/ 60A/ 90A/120A Sparking Axis: Z Eroding direction: Z + - Language: English/ Chinese Resolution: 0.005 mm Display Axis: 3 Axis Linear Scales Position Unit: mm or inch Programming: Max. code 999, self program editing, 12 fVlevel automatic processing Max. Machining Speed: 2230 mm3/ min Finest Roughness: 0.2 ·gmRa Power Comsumption: 15 KVA Min. Electrode Wear: < 0.2% Cabinet Dimension: 500x500/ 600x800/ 800x 1200 mm Net Weight: 100/120/150/200kg X Axis Travel: mm 450, inch 13.78 Y Axis Travel:mm 350, inch Z Axis Travel: mm 200 + 200 8 + 8 Work Head Travel: mm 250, inch 9.8 Work Table Dimension:(LxW) mm 700 x 420, inch 27.56 x 16.54 Work Tank Dimension: (LxWxH) mm 1300 x 660 x 400 inch 51.18 x 25.98 x 15.75 Distance between Electrode and work table: mm 690-220, inch 27.17- 8.66 Max Electrode Weight: kgs 80 lbs 176 Max Workpiece Weight: kgs 800 lbs 1760 Machine Weight: kgs 1500lbs 3300 Machine Dimension: (LxWxH) mm 2100 x 1600 x 2200, inch 82.68 x 63 x 86.61 Specification of Dielectric Fluid Tank Capacity: L 300, Gallon 82.5 Weight: kgs 200, lbs 440 Dimension: (LxWxH) mm 1450 x 850 x 400, inch 57.09 x 33.46 x 15.75
Specification: FMV-1700 (y axis : 1700mm) Controller: Mitsubishi 520 (M 520) Year: 1996 machine quality good
Stainless pipe / tube making machine Yts1 114.3mm - 216.3mm Yts2 76.2mm - 114.3mm Yts7 4.3mm - 12.7mm
