A. The orders changed of size fastest in approximately 3-7 seconds to get pre-setting position. And provide 99 memories pre-setting for order change at any time also accommodatingly in the production management system.
B. The machine has installed precision liner slides and ball screw bearing with encoder to get accurate position. The precision allowance within 0.5 mm to adapt of accuracy requirement various processing factories.
C. The upper scoring wheels is single convex type. It can be replaced destruction wheels to used. The upper and lower scoring wheel has equipped 3 types: convex to convex, convex to concave and convex to flat . Selected by switch button. Operate easily.
D. Front scoring units affirmed to rear scoring units, the scoring distance of board to achieve the random size.
E. The round razor type slitting knives. It can slit cardboard orderly and pretty. The minimum slitting edge is 3~5mm.
F. Automatically grind and lubricate without removing slitting knives and extended the life of knives.
G. Lubricant device is fixed by level feeding system which volume control very accurately and no waste even no any pollution to the board and environment
Price, delivery time, moq are negotiable, please contact us for quotation.
* Adopts individual AC servo motor to control to automatically arrange order, the arranging order time is quick and precise, the time is 3-8 seconds.. * Adopt high precise linear guard rail to guide with gear and rack to drive with high precision, The slitter and scorer precision is �±0.5mm. * Adopts thin tungsten steel blade design, the paper after cutting is no collapse, no burr with good appearance and straightness. * With blade auto-cooling and lubricating�it can sharp the knife milled manual or auto, slitting and sharping knife can be at the same time to improve working efficiency. * Press line wheel three types: convex to concave, convex to convex, convex to flat three types, adopt electrically to change, pressing line gap automatic adjustment, with good line shape, it is not easy breaking paper and easy to bend. * The whole machine electric correcting the error to cooperate with the paper excursion effectively. * Slitter and scorer adopt individual motor drive, automatically track the speed of the production line. * With two machine cooperating to realize changing order time 0 second . * Max. speed:200m/min Valid working width1400mm-2200mm
MJBD-2 Thin Blade (Paperboard Slitter and Scorer) Introduction The Thin Blade (Paperboard slitting and pressing line machines) produced by our company is good appearance, good structure, with good design, easy to operation, easy to maintenance, and with competitive price. The paperboard slitting and pressing machine use thin blade to cutting, the edge of the knives are very sharp, this makes the paperboard after cutting are very good edge, this improves the appearance and quality of the paperboard. Make the paperboard easier for entering printer machine, and improves the quality of the carton. The design of this machine use pressing and pulling paperboard with double wheels, can change wheels base. This means the machines can press and slitting, also can pull paper in front and back, can slitting stably. This is perfect machines for manufacturers of cartons. Technological Parameters Model MJBD-2-1800 MJBD-2-2000 MJBD-2-2200 MJBD-2-2400 Max paperboard size (mm) 1700 1900 2100 2300 Max mechanical speed 100pcs/min 100pcs/min 100pcs/min 100pcs/min Blade knives 4 knives 4 knives 4 knives 4 knives Presslines 6 pairs 6 pairs 6 pairs 6 pairs Min slitting width (mm) 130 130 130 130 Min pressing width (mm) 30 30 30 30 Outer diameter of the thin blade 220mm or 200mm 220mm or 200mm 220mm or 200mm 220mm or 200mm Thickness of the thin blade 1.2mm(steel), 1.4mm (alloy) 1.2mm(steel), 1.4mm (alloy) 1.2mm(steel), 1.4mm (alloy) 1.2mm(steel), 1.4mm (alloy) Power 4.0KW 4.0KW 4.0KW 4.0KW Pneumatic pressure
Supplier: High shear mixers, multi-shaft mixers, double planetary mixers, double planetary dispersing mixers, high-speed dispersers, vacuum high-speed disperser with scraper, ribbon blenders, static mixer units, heat exchanger
Services: Manufacture, international trade
The first order is jdl series parallel twin screw.The twin screw speed , high shear, strong hybrid advantage , make the material fully completed plasticizing mixing , because there is no head back, so that we can arrange for screw combination of different materials and flexible, achieve the best mixing. In order for the jdl series single screw extruder.Low speed characteristics of the deep groove screw provides processing environment of low shear, at the same time with the barrel cooling, prevent the plasticized material produce the phenomenon of thermal decomposition at high pressure extrusion ;is conducive to the realization of process different, to maximize the advantage of equipment , improve production efficiency; Suitable for processing all types of heat -sensitive materials , such as pvc, xlpe, low smoke halogen -free flame retardent cables, shielding material.
Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg â??
MJRY-2 Creasing and Die-cutting Machine (With Inverter For adjust the speed) It is a kind of special equipment for all assortments of common card boards, corrugated boards, plastic sheets, leather products. It is suitable for printing, packing, decorating, plastic industries etc. with the features of firm structure, exquisite marking, greet cutting, high precision, ease of operation, safety and reliability etc. This Series Creasing and Die-cutting machine use Inverter to adjust the speed.
MJT model 3-Layer Corrugated Paperboard production Line Introduction Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customer's own line. Equipments List Equipments Name MJT-60-1600 Economical MJT-80-1600 Standard MJT-100-1600 High-speed Mechanical Roll Stand (include the paper roll rail.) 2 2 Hydraulic Roll Stand (include the paper roll rail.) 3 Pre-heater (diameter 400mm)(Up) 1 2 Pre-heater (diameter 600mm)(Ground) 2 Vacuum Single Facer (Roll 280), gimbal drive 1 1 Vacuum Single Facer (Roll 320), gimbal drive 1 Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 1 Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) 1 Double preheater (diameter 400mm) 1 1 Double preheater (diameter 600mm) 1 Double Gluer - A 1 1 Double Gluer - B 1 Double baker (600mm X9heat plates, 4.5meter cooling part.) 1 Double baker (600mm X11heat plates, 5meter cooling part.) 1 Double baker (600mm X14heat plates, 6meter cooling part.) 1 Thin Blade (Simple electrical adjust.) 1 High-Speed Thin Blade(Electrical up and down, electrical adjust the precision.) 1 1 Mechanical Cutter 1 NC Cutter (Servo, straight knife.) 1 1 Conveyor and Stacker 1 Paperboard booking machine 1 Glue system 1 1 1 Steam system (not include the boiler and pipes.) 1 1 1
MJDX-2 Stitcher (Stapler) Introduction: MJDX-2 Stitcher (Stapler), the head of the machine is made with electromagnetic clutch and electromagnetic arrester. The machine has advantages as working reaction speed is high, low noise and so on. The carton stapler is the special equipment for nailing the corrugated paper carton and paper box with double-feed device. It can nail double line oblique according to 45degree at the same time and nail the big and middle size paper case continuously or interruptedly. Sizes available: 600mm, 900mm, 1200mm, 1400mm, 1600mm, 1800mm. Technological parameters: Main technological Parameters: Model MJDX-2 Speed 400 stitcher/min. Working thickness 3-ply, 5-ply paperboard Stitch type 45¡ã double lean-nail Width of stitch feet 13mm Size of stitch wire 17# Operation table height 1.2m Motor power 0.55KW Machine Weight 650kg
MJSGL-2 Single Facer Line (2-layer corrugated paperboard production line) (2-ply corrugated paperboard line) Roll Stand Single Facer Paperboard Cutter Note: For the Single Facer line, we can produce different model roll stand, single facer, and paper cutter as customer's requirements. Introduction: Single facer line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories. Technological Parameter: Working Width 1400mm 1600mm 1800mm 2000mm Heating method Electrical heating/Oil heating / Steam heating Design speed 40-70m/min Economical speed 30-60 m/min Compress-air pressure 0.4-0.9MPa Flute type Standard flute UV Flute Standard spec. A,B,C,E,F
