Cold white 5700k Warm white 3000k 8w 810ml Ac 110-220v H 113 60mm E27 Also available in dimmable
Item Name: THERMOSTAT 3H6-01030-0 / 3H6010300M OEM NO.: 3H6-01030-0 / 0H6010300M TOHATSU / NISSAN No.: 309-069321-0 / 309069210M FOR TOHATSU / NISSAN OUTBOARD 2.5, 2.5, 3, 4, 5, 6 HP FITS: NISSAN 2014 NSF2.5B 4 STROKE NISSAN CYLINDER AND CRANK CASE TOHATSU 2014 MFS3.5B 4 STROKE TOHATSU CYLINDER AND CRANK CASE Etc.
Solar/poe charge controller + gigabit poe injector Model : bc-4024-g56d 1. Input : 1.1 input voltage: poe : 36vdc ~ 57vdc Solar : 30v ~ 45v Battery : 24v 2. Output : 2.1 output voltage & current: Output : 56v poe(front) / 24v load(rear) Max. Current : 0.63a poe(front) / 10a load(rear) 3. Charger : 3.1 poe charge current : 0.85a (max) For load first, only the balance used to charging. Only work with battery connected. 3.2 poe input watts : 30w(min) 3.3 poe input compliant to 802.3at, all 4 pairs available, giga. 3.4 solar charge current : 40a(max) 28.4, 0.3v vin.
Compliant with IEEE802.3by (25 Ethernet) Backward compatible EMI shielding Data rates : up to 25 Gbps Data rates : up to 25 Gbps Operating for High Temperature as 0â??~ 70â?? Low power consumption EMI shielding Higher Length for customized option
jb Capacitors manufactures Subminiature Size Metallized Polyester Film Capacitors JFH. JFH's size is very small and has High performance and efficiency. Following are Subminiature size Metallized Polyester Film Capacitors features, specifications and drawing. We supply high quality Subminiature size Metallized Polyester Film Capacitors. Operating Temperature -55�°C~ +85�°C Climatic Category 55/85/21 Rated Voltage 100VDC Capacitance Range 0.001F to 2.2 F Capacitance Tolerance ±5%
Features: Designed for industrial application. Resistant to high temperature and high pressure. Sensor type: Capacitive Humidity Sensor & Pt 100 A class Measuring range: 0 . +180C Output: 0 . 20 mA / 4 . 20 mA / 0 ... 10 V Accuracy: Temperature 0.15 C / Humidity 2%RH IP rating: IP65
CS1 Process Indicator: View File Measuring linear signal 0 10V and 0(4) 20mA in one indicator(input code: AV) Option available 1 of 1 relay, 1 analogue output or RS485(Modbus RTU mode) 1 relay can be programmed individual to be a Hi / Lo / Hi Latch / Lo Latch energized with Start Delay / Hysteresis / Energized & De-energized Delay functions. Analogue output or RS 485 communication port in option CE Approved & RoHS
O ring.
Features: Suitable for HVAC application. Simple appearance. Multi-measurement. Sensor type: CO2 NDIR sensor / Temp. & humidity MEMS sensor Measuring range: 0 ... 2000 PPM / 0 ... 50 C / 0 ... 100%RH(Non-condensing) Output: 0 ... 10 V / 4 ... 20 mA Accuracy: 40 PPM 3% of reading / 0.5 C / 5 RH IP rating: IP20
JFMA - Box Type Metallized Polypropylene Film Capacitor For Capacitive Divider Specifications Operating Temperature -40 C +105 C JFMA-Box-Type -Metallized-Polypropylene-Film-Capacitor-For-Capacitive-Divider Rated Voltage 400V(230VAC) 630V(275VAC/305VAC/310VAC) Capacitance Range 0.0047 3.9F Capacitance Tolerance 5%, 10% Insulation Resistance C0.33 f ; IR 50000MOhm C 0.33 F ; IR 15000MOhm Dissipation Factor 0.1% max. at 1KHz, 20C Dielectric Strength 160% of rated voltage for 60 sec.
MR16 Cylinder Mini Track Lighting DIMENSIONS (D)DIAMETER:1-5/8 (L)LENGTH:1-3/4 (M)MAX EXTENSION:: 4-1/4
No-load speed:13000r/min. Two-step Lock button; Handle Use Panasonic 3AH BATTERY Body diameter: 90*20*14cm(Short type)ã??126*20*14cm(Long type) Weight: 0.9kgs Blade material: S45C Blade Operating time:30~40 minutes
diameter 2~30mm, NBR, EPDM, FPM, Neoprene, packed on spools.
1. Varied battery management styles 2. 24 hours automatically monitoring 3. Wi-fi and hotspot connect method 4. High extensibility of hardware allows user to manage big amount of battery 5. B-TEK special forecast scatter chart 6. E-mail alarm notification 7. Monitoring item includes battery volt., temperature, DCR, micro-discharging volt. and EMF 8. B-TEK unique AI forecast function 9. Support Modbus TCP/IP, RTU and LAN method UPS system as the important equipment to the stable power supply needs a great amount of battery as a back-up power source. Due to the enormous amount of the batteries, it makes it hard to carry out the manual maintenance. To maintain the discharge ability during the outage, regularly manual detection is needed. However traditional battery discharge test needs battery offline. It's time-consuming and increasing the cost. BMS system can improve the risk of manual measurement, battery deterioration, and power failure, changing battery according to the actual condition of batteries. Besides, the automatic battery equalization function can extend battery life. Not only can it raise the reliability, lower the cost of battery failure, decreasing manual labor also increasing the stuff safety by avoiding direct contact with the electric device. BMU is installed to the individual battery, collecting the data and send it to the UMW to analyze. BMU is powered by the detected battery, therefore the extra power is not needed, This unit applies to a lead-acid battery, nickel-cadmium battery, lithium battery. BMU analyzes 5 parameters: terminal voltage, temperature, dc resistance, micro-discharging voltage, and electromotive force. Bu analysis, the system finds the deteriorated reasons for the battery and do the predictive maintenance. The groove on the back of BMU allows it to attach on the mounting rail. Dimension is 75*57*31mm. Reverse connection protection function will keep the internal circuit of BMU intact from a reverse connection. CMU connects to the charger and UMW. The main purpose is to monitor the current of the charger and the total voltage of the battery bank. The groove on the back of the CMU allows it to attach on the mounting rail. Dimension is 75*57*31mm.UMW provides the website browsing function, the user can access the real-time data, historical data, forecast scatter chart, line or curve graph through it. We can utilize a computer, mobile phone or tablet to remotely access the system through ethernet and hotspot function. Besides that, we can also use the FTP and VNC software to remotely access the data or control the system. When the system detects the abnormal parameter, it will automatically send the email notification and inform the users. Another AI function can provide a maximum of three years predicted data of the battery by analyzing the historical data. Efficiently manage the energy system Website: http://www.b-tek.com.tw/en/web/
EDAM-8530 ISO USB to RS-232 / RS-422 / RS-485 converter * Automatically switch USB signal to RS-232/RS-422 or RS-485 * Driver support for Windows 95/98/ME/2000/XP/Vista/7 * Power and activity indicator for troubleshooting * Auto switching baud rate up to 115.2 Kbps * Reserved space for termination resistors * Minimum 3000 VDC isolation protection * Mounts easily on DIN-rail or panel * Full-duplex RS-232/RS-422 support * RS-232 RTS & CTS signals support
EDAM-8531 ISO USB to RS-422 / RS-485(TX,RX,RTS,CTS) convert * Automatically switch USB signal to RS-422 or RS-485 * Driver Support For Windows 98/ME/2000/XP/Vista/W7 * Power And Activity Indicator For Troubleshooting * Auto Switching Baud Rate Up To 115.2 or 921.6 Kbps * Reserved space for termination resistors * Minimum 3000 VDC Isolation Protection * Mounts Easily On Din-Rail Or Panel * Supports RS-485 full(4-wire) / half(2-wire) duplex * RS-422 RTS & CTS Signals Support
10"2in1 fan(stand/desk) Details: Oscilation function Extra metal tube for desk/wall fan Button press type adjustable stand tube 3-aluminuim blade, Safty metal coated grill guard, Sterring type base, 3-speed rotory type switch box. Packing: 4pcs/white printed carton, 8316pcs/1x40hq.
7.4v 2300mah li ion battery pack with plastic housing; Integrated with protection circuit module; Integrated with gas gauge ic; Output: positive, negative, 10k ntc
12v 10s1p 3.6ah nimh battery pack; Low-self discharge rate type Integrated with ntc, thermal protector, pptc Lead out 3 wires with connector
3.7v 200mah li polymer battery pack Integrated with protection circuit module Lead out 3 wires with connector