* Color: Color Changing with remote control * Indoor & Outdoor use * Connectable up to 98.4FT * Low power consumption * Standard length 16.4ft * Custom length available * Solar potential
The sd series optical level switch uses the principle of light reflection in a prism to sense the absence or presence of a liquid at the point where the sensor is installed in a tank, pipeline or other type of container. Feature: 1.Simple and compact with no moving parts 2.Led indication 3.10-28vdc, 115vac or 230vac powered versions 4.Solidstate npn/pnp or relay output 5.Operating temperatures up to 257°f (125°c) 6.Wide range of use in machine systems for a variety of liquid level detection 7.Unique sd22 design, switch body and tip disconnects
SP Series is a thermal dispersion flow switch is a precise flow sensing device for liquids. The principle of operation is based on heat transfer. The SP thermal dispersion flow switch is offered with a variety of output types and materials of construction. No moving parts make the SP series a long lasting and high value flow switch. Feature: 1.No moving parts, solidstate performance and reliability 2. per second (150cm/s) measuring range for water; 1~118300cm/s) range in oil 3.304SS, 316SS, PVDF and polypropylene wetted parts 4.Maximum operating pressure up to 1,450psi (100bar) 5.Choice of NPN/PNP, N.O. or N.C. relay, or SPDT relay output 6.Standard and custom extended insertion lengths 7.Standard or high temperature, explosionproof units available 8.LED indication of flow status 9.Marine certified unit available
The ec series is a hydrostatic pressure level transmitter for measuring the level of liquids in various tanks and other types of vessels. The ec hydrostatic pressure level transmitter consists of a piezoresistive sensor and wheatstone bridge to directly measure head pressure exerted on the diaphragm of the ec level transmitter. When the pressure is exerted on the diaphragm, as a result of the liquid level, the pressure is transferred to the wheatstone bridge electrical circuit through silicon oil contained in the ec sensing unit. This creates a differential voltage, which is then amplified to create a variable 4-20ma output that varies as a result of the changing liquid level. In addition, a pressure transducer is available for measuring pressure in tanks or pipes and producing a variable 4-20ma output. Application: Use 1.Extension cable unit can measure in deep wells or reservoirs 2.Tank level measurement and control 3.Plc or dcs input for level control functions 4.Pressure measurement of gas or liquid (ec1500) Industry 1.Water treatment and distribution 2.Chemical 3.Many others
Specification: 1.Supply voltage: loop power 18~32 vdc 2.Dcv input: 0~500 mv/ 0~1v/ 0~5v/ 0~10v/ 0~20v 3.Dca input: 0~20 ma/ 4~20 ma 4.Thermocouple input: k / j / t / e / r / s / b / n 5.Rtd/ resistance input: pt100/0~400w 6.Analog output: 4~20 ma (loop power) 7.Ambient temperature: -20~60c 8.Communication: hart 9.Galvanic isolation: 1500v Feature: 1.Isolation voltage: 1500 vac 2.Loop power 12~32vdc 3.Linear current output 4.Lcd display with 3 press buttons 5.Universal type with multi-signal input 6.With communication port for programming 7.Optional: hart Transmitter
High Quality Value disc made in Taiwan 25GB Blank BD bluray Made in Taiwan,100% raw materials,Accept OEM Characteristics : High data transfer rate Long-term data archiving Full capacity with most of DVD player or writer Data, video, and audio back-up and archiving Hard coating against scratches Prevent dust and stains No stacking ring (full face printing surface) Large capacity data storage and retrievalz
Data capacidad: 700mb 120min Velocidad: 52x Marca: 1. Unimaster brand disc printing 2. Oem welcome!!! For any inquiry, pls contact us through email: sales01@elmejor.com.tw Packaging: 50 pieces in bulk
CSA & UL listed Festoon Cable (CSA C22.2 NO 96-09) Size :4/0~16 AWG Core :3C~24C Conductor : Soft Bare Copper Insulation : PVC Jacket : PVC Rated Temperature : -40~105C Rated Voltage :600V Standard : UL, CSA Application : Cranes, hoists or any equipment which travels with lateral traversing motion. We are the sole UL & CSA listed Festoon cable Manufacturer in Asia. Feel free to contact me anytime for any inquiry, thank you!
Trade Term & Delivery?: (1)Quotes are based on F.O.B Taiwan port US$. (2)Payment term: T/T in advance. (3)Delivery: within 2~3 weeks after receipt of T/T(wire transfer). --- O.E.M./O.D.M orders are welcome ---
Features: (1) Delicate printed coordinates for easy recognition and calculation. (2) Board body made by advanced POM material to avoid static electricity and frequency interference. (3) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (4) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive, can stand operation more than 10, 000 times. (5) Max. allowable voltage/current:48Volts/5Amps. (6) WBU-2xx Series is a valuable tool.No signal interference caused screen white dot. Suitable to design high level prototypes whether in R&D application or university laboratories.
Specification of 2CP5 series pressure sensor (0.5~4.5Vsignal output) Pressure range!G 0-15psig ~ 0-650psig Performance!G Precision: !O 1.2% span (linearity, hysteresis, repeatability, and calibration). Temperature deviation!G!O0.013%FXC Operating temperature!G-40FXC to 135FXC Physical properties!G Pressure resistance!G5X15-75psi!F3X100-300psi!F2X500+psi!C Burst pressure!G2CP5 1500 psi (brass)!F2CP50 2500 psi (plated steel)!C Random vibration!G (50-2000 Hz)!G11g!C Cycle life!G10M F.S cycle!C Fall (in either axis)!G1.5m!C Electrical connection!GNema 4X, IP65!C Electrical characteristics!G Power voltage!G4.5 to 5.5 VDC!C Power current (Max@5.5Vdc no load)!G8 mA max!C Output load: 10K ohms typical. Overvoltage protection!G16 VDC!C Short-circuit protection!GYes!C EMC (10MHZ-512MHz)!G50 V/m The output voltage (Vout): 0.5 to 4.5 Vdc t typical. Output current (maximum decrease or source)!G2.5 mA!C Output response time!G10 mS!C Reverse voltage!G14 VDC!C EMC (512MHz-1GHz)!G25 V/m!C ESD (CDF-AEC-Q100-002)!G15k V!C
ACM Product Capability !¡¦ Based on TI ACM patent of active sensitivity skill, the sensor could detect 2 to 5 ppm CO concentration., which is the average CO concentration in the cities of western countries. Normally it is no necessary to detect low concentration of gas in cities. However it is expected to do so in the country sides. ACM would remind ECU the source of smell nearby. !¡¦ Based on TIACM patent of absolute concentration detect skill, 2 sensors separately exam the absolute concentration of NOx and CO. The advantage is to provide a report of air quality. It also applies to the condition when the gas exists longer time or increases its concentration, to even satisfy the demand of advanced loop circle control strategy. !¡¦ TI ACM favors customers to develop more advanced loop circle control strategy.
APT Key Features The sensor design is based on ceramic capacitor structure. All signal processing circuits are gathered together as one application-specific integrated circuit. Allowable for a wider temperature range (-40¢FXC to +135¢FXC ). Allowable pressure range is up to 3,000psi. Precise assembly process; no further adjustment is required after leaving factory. Absolute or relative pressure sensor. A reliable package type especially designed for engine and chassis installation. Accurate and stable output signal. Able to fit for all auto pressure liquids. Able to enhance the temperature output. APT Operation Principle
Specification - Three independent white light sources with different color temperatures: 3000K +/- 500K 4000K +/- 500K 5500K +/- 500K - User can define the output light color temperature Manual and continuous adjustment of light intensity Illumination intensity: 250 Lux - 1000 Lux Illumination area: 100mm x 100mm Uniform area: >95%@ 50mm x 50mm >90%@ 100mm x 100mm Application - PV characterization under indoor light environment
Axial Features 1. Quick transient design 2. High Precise Capacitance ±3%, ±5% 3. Very Low Dielectric absorption factor 4. Very Low Dissipation factor 5. Very Low ESR 6. Very Low Inductance 7. Excellent handling of high current audio pulses
Features 1. related IC's needs of the wireless/portable systems. 2. Lower profile, lower loss and higher Current in Compact Size is the design guide of our principles to design such inductors which made by unique automatic process. 3. Industry standard size and various load spacing available. Applications 1. Consumer Electronics, , Power Management, Industrial, Medical 2. High-frequency applications including mobile phones, Portable Devices,Bluetooth 3. GSM, CDMA, PDC
Features 1. Load life of 10000 hours at 105C 2. High ripple current 3. Miniature Series 4. RoHS Directive Compliant
jb Capacitors manufactures SMD Aluminum Electrolytic Capacitor. JCK 1000H to 2000H at 105C Chip Aluminum Electrolytic Capacitor is one of the most common series, we sell quite good prices, high quality and with short lead time. Following are 105�°C SMD Aluminum Electrolytic Capacitor features, specifications and drawing. Chip type, operating with wide temperature range -40~+105C. Designed for surface mounting on high density circuit board. Emboss carrier tape packing system is available for automatic insertion.
Factory OEM WDM / BIDI / Simplex Duplex MM SM LC / SC 1.25G SFP Transceiver Optical Module 1.25G SFP 1310nm 10-40KM LC
48*10/100/1000M+4*10G SFP Port+1*Console+1*USB Ports Managed Network switch Communication Mode: Full-Duplex & Half-Duplex Ethernet Ports: 48*10/100/1000Mbps RJ45 Ports Uplink Ports:4*1G/10G SFP+ Slots Power Supply:AC 100-240V Uplink Ports:4*1G/10G SFP+ Slots Packaging Details 1pcs/Inner Box 5box/Carton"
