Product Name : power bank 8800mah Product Description Battery Cell 18650 lithium electric core Shell material plastic shell Product Dimension 130*73*23mm Weight 283 g Output USB 1 5V-1.0A Output USB 2 5V-2.0A Input Current 5v-1.5A Color white, black,red ,yellow Output AutomAhtically detect load LCD screen power capacity displays Service life: Cycle use 500 times or more
Product Name : 8800mah power bank Product Character Battery Cell 18650 lithium electric core Product Dimension 97*64*23mm Weight 174g Output USB1 5V-2.0A Output USB2 5V-0.6A Input Current 5V -1000mAh Color:black, white, blue, red, Output efficiency can reach more than 85%
Features High-Density design for 1U-24 port keystone panel Compliant with the ANSI/TIA-568.2D Cat.6A requirement RJ45 8P8C 50u" Jack 23-26 AWG strandred and solid wires range T568A and T568B wring Dust prevent shutter
Features High-Density design for 1U-24 port keystone panel Compliant with the ANSI/TIA-568.2D Cat.6A requirement RJ45 8P8C 50u" Jack 23-26 AWG strandred and solid wires range T568A and T568B wring Dust prevent shutter
LR9150 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance * GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy * High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm * 52 track verification chann els * SBAS (WAAS or EGNOS,MSAS) * Active Jammer Remover, removes in-band jammers up to 80 dB-Hz * Tracks up to 8 CW jammers * Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. * Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. * SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. * Reacquisition Time : 0.1 second * RF Metal Shield for best performance in noisy environments Hardware and Software * Based on the high performance features of the SiRFstarV low power single core logic. * Adaptive micropower controller * Only 50 to 500�¼A maintains hot start capability (core logic) * < 10mW required for TricklePower mode * RoHS compliant (lead-free) * SMT pads allow fully automatic assembly processes equipment and reflow soldering * Advanced navigation features * Smart sensor supported by I�²C interface * External interrupt input for context change detection Advantages * Built-in LNA. * Built-in internal ROM and based on Firmware 5.5.X * It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. * Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) * Support SiRFaware technology * Support adaptive Micro Power Controller power management mode. * < 10mW TricklePower, so user can leave power on all day instead of power off. * Suitable for battery drive devices that need lower power consumption application * Cost saving through elimination of RF and board to board digital connectors * Flexible and cost effective hardware design for different application
Model Number 35 39 42 57 86 110 Length/Side (mm) Height (mm) Step Angle (deg.) 0.9 /1.8 Drive Voltage (v) Rated Current/Phase (ma) Winding Resistance (Ohm)
Item T1011N 1. Rated Voltage (V) DC 5 2. Rated Current/Phase (mA/RMS) 111 3. Coil DC Resistance (Ohm) 45 10% 4. Step Angle (Degree) 18 5. Drive Mode Constant Voltage 6. Excitation Method 2-2 Phase excitation(Bipolar driving) 7. Insulation Class Class E 8. Pull-out Torque (g-cm/pps) 5.9/500 9. Pull-in Torque (g-cm/pps) 5.6 /500 10. Max. Pull-out Pulse Rate (pps) 1310 11. Max. Pull-in Pulse Rate (pps) 1160
JFR Series FMCW Radar Level Transmitter
Stator : OD140(NEMA48) Input Power : VAC 115/230 output power : 1HP Speed : 300 ~4000 R.P.M Rotation : CW CCW Magnet : Permanent magnet Bearing : Ball bearing Storage humidity : 95%RH max. (non condensing) Operation temp. : 0-55(non condensing & freezing) Insulation class : B Energy efficiency : 1st level
Stator : OD120(NEMA42) Shaft : Single Dual Input Power : VAC 115/230/277 output power : 1/4 HP, 1/3HP Speed : 300 ~4000 R.P.M Rotation : CW CCW Magnet : Permanent magnet Bearing : Ball bearing Storage humidity : 95%RH max. (non condensing) Operation temp. : 0-55(non condensing & freezing) Insulation class : B Energy efficiency : 1st level
Stator OD94 Shaft Single dual Input power : DC24/48V or DC115/310V output power : 20~250W Speed : 300 ~3000 R.P.M Rotation : CW or CCW Magnet : Permanent magnet Bearing : Ball bearing Storage humidity : 70%RH max. (non condensing) Operation temp. : 0 40 non condensing and freezing) Insulation class : E Energy efficiency : 1st level
Stator : OD82 Shaft : Single Dual Input power : DC24/48V DC115/310V output power : 20~250W Speed : 300 ~3000 R.P.M Rotation : CW CCW Magnet : Permanent magnet Bearing : Ball bearing Storage humidity : 70%RH max. (non condensing) Operation temp. : 0 40 (non condensing & freezing) Insulation class : E Energy efficiency : 1st level
Shaft : Single Rated voltage : DC 24V Input power : 20W Revolution per minutes : Max 1350 R.P.M. Rotation : CW/CCW Magnet : Permanent magnet Bearing : Ball Bearing Storage temperature : 5~95% RH Operation temperature : 0-55 Insulation grade : E Energy efficiency : The first level
EDAM-9017 Ethernet-Based 8-ch Isolated Analog Input Module * Support protocol Modbus / TCP/ IP, UDP, JCMP, ARP * Provides two digital outputs (open collector) * Ethernet 10/100 Based-T communication * Support isolated input channels * Support +- V, +- mV, mA analog input * Fully photo-isolation 3750Vms * Built-in TVS/ESD protection * Wide supply voltage (10-30V)
EDAM-5017 16-ch Analog Input Module with 2-ch Isolated DI and 1-ch DO * Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command * Support USB2.0, 10/100 Ethernet, RS-485/232C, CAN (optional) * Fully photo-isolation 3750Vrms * Wide supply voltages (10~30V)
EDAM-9053A 12 DI (Dry/Wet contact) and 4 DO channels Digital I/O module * Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP * Ethernet 10/100 Based-T Communication * Support 4 Isolated digital output channels (NPN). * Provide Pulsed/delay Output Mode * Support 12 Isolated digital Input Channels * Provide Counter/ Frequency Inputs Mode * Support Dry/ Wet Contact Inputs * Fully Photo-Isolation 3750Vrms * Status LED indicator
EDAM-9015 Ethernet-Based 7-ch RTD Input Module * Support PT100,PT1000, Balco 500,NI604, NI1000 RTD Types * Support Protocol Modbus/TCP, TCP/IP, UDP, ICMP, ARP * Ethernet 10/100 Based-T Communication * Support Isolated Input Channels * Fully Photo-Isolation 3750Vrms * Wide Supply Voltages (10-30V) * Bulit-in TVS/ESD Protection * Bulit-out Auto Detection
EDAM-5019 16-ch Thermocouple Input Module with 2 iso. DI and 1 DO * Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command * Support USB2.0, 10/100 Ethernet, RS485/232C, CAN (optional) * Support Thermocouple J, K, T, R, S, E, B, N, C Type * Support isolated input channels * Fully photo-isolation 3750Vrms � Wide supply voltages (10_30V) * Built-in TVS/ESD protection * Burn-out auto detection
High Efficency Power Supply
DC Brushless Motor Application
