be used in the synthesis of semi-products of glycerol derivatives, dyes and surfactants; used to obtain synthetic materials.
It is used to produce Float glass. Not applicable to the food industry. Supplied in steel containers.
CAS No 7757791 Potassium nitrate is an inorganic salt with a chemical formula of KNO3 we would like you to contact us for more information about our different chemicals and products
DESCRIPTION ITLS PMS 60 is a single component elastomeric sealant without isocyanates. It cures rapidly under the effect of atmospheric humidity to form a flexible and resistant joint with very good adhesion on most materials. APPLICATION ITLS PMS 60 is suitable for industrial and refrigerated trailers, truck bodies, shipbuilding, air conditioning and ventilation units, sandwich panels and other industrial applications. ITLS PMS 60 can also be used for bonding and caulking different materials used in the building industry : concrete, wood, aluminum, most lacquered metals, polyester, glass, stone, ceramic, and so on. However, for difficult materials especially lacquered or non-ferrous metals, it is necessary to make tests beforehand. INSTRUCTIONS FOR USE SUBSTRATE PREPARATION: The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand. They may be cleaned with PMS primer, methylethylketone (MEK) or acetone. Check the compatibility of the solvent used with the substrates. It may be necessary to rub down the substrate beforehand. After rubbing down, the surface should be recleaned. Allow the substrate to dry after degreasing. When using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer. CAULKING: ITLS PMS 60 can be applied by a manual or pneumatic gun. After application, use a putty knife to smooth the joint with soapy water. Do not apply at a temperature under 5 C. In cold weather, store the cartridges at about 20 �°C before use. This product should be used within 24 hours of opening the cartridge protection; otherwise, the sealant could harden inside. Avoid any contact with non-cured polyurethanes during curing. CLEANING: Tools can be cleaned with PMS primer, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary. STORAGE AND SHELF LIFE 12 months in the original, hermetically sealed packagings between 5 and 25 C PACKAGING 290 mL cartridges and 600 ml sausages SAFETY Not classified as hazardous. Read the material safety data sheet before use.
DESCRIPTION CA-055 is an emulsion primer of water-based acrylic resin with excellent properties such as water resistance, pull-off strength and pore-filling ability etc. , especially used to improve the physical properties of cement. It can be mixed with water at any ratio. FEATURES Excellent penetration into the concrete substrate to increase pore-filling ability and adhesion. Reduced transport paths of concrete structure to enhance durability. Excellent water resistance. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As cement grout additive. As water-based primer. For making two component tile adhesives. As adhesion aid for skim coat materials. PACKAGING 5 gallon Plastic Pails FLAMMABILITY Being water-base, it is non-flammable.
BESTCHEM product are applicable:Textile, coating, plastic, color drawing...,related products. :good coverage, high elastic, soft hand feeling, good washing fastness....etc Water base Plastisol ink Silicon ink Binder Additive Pigment
Description CP-121W(14) is suitable for new and old concrete floor with resistance and waterproofing ability. It has ability to penetrate in concrete, plaster or the surface of the stone for the building and to reach waterproofing. * Able to apply on the damp surface * Odourless and eco-friendly * Excellent resistance ability of negative water pressure (Comply with CNS1232. CNS10460. ASTM E96-12 B) * Enhance adhesion strength Properties * Leaking stoppage from basement inner wall * Waterproofing on negative water pressure * Anti-seepage for underpass, tunnel and water tank Application 1. Clean the surface to be free from loose particle, dirt and oil. 2. 3 options for application
FC-40: Appearance: Brown Liquid Severe (Be): 44 Ferric Chloride %: Greater than 40% Fe2+ %: Less than 0.3% Free Acid % Less than 0.3% FC-37: Appearance: Brown Liquid Severe (Be): 40 Ferric Chloride %: Greater than 37% Fe2+ %: Less than 0.3% Free Acid % Less than 0.3%. PE drum.
Poly Ferric Sulfate (PFS) is a complex ferric material. The molecular formula is the [Fe2 (OH)n (SO4)3-N/2]m, n＞2; m=f (n). There are a lot of complex ferrous ion ([Fe2 (OH)3]3+, [Fe(H2O)6]3+, [Fe3(OH)3]6+) in its water solution. So it is a good coagulant which has strong flocculation and has a good coagulation. Its chemical structure is a solid network polymer which has a multinuclear complex ion. It can be easy to hydrolyze in water and can produce the highly efficient multinuclear hydroxyl complex positive ion. In the process of water treatment, Polymer ferrous sulfate has a good ability to neutralize surface electric charge of suspended substances, and linking suspended particle. PE drum.
Our flocculants(polyacrylamide) in type as under: Nonionic : 0~10% ionic Anionic: 10 ~ 100 ionic Cationic : 5 ~ 100 ionic Amphoteric 15kg or 25kg paper bags
High quality SiO2 / Silicon sand / SiO2: over 99 % Capable supply : 50,000 ~100,000 tons/per month CIF Term We are the directly seller, we can customize the products as your purpose and request. The most important is the price definitely lower than all marketing rate PAYMENT: T/T, SBLC, DLC
strain preservation tube assists microbiologists preserve bacterial strain at low-temperature, which is conveniently preserve quality control or test strains. Bacterial including all kinds of aerobes, anaerobes, gram positive, gram negative and yeast. The preservation tube is leak proof, and can be stored at low temperature and liquid nitrogen. There are five different colors of the tubes which are easy distinction. GermBank provide better bacteria preservation and also cost effective. More information
Hardener for Epoxy: Reactive Polyamide Resin Denaturalized Polyamine Denaturalized Polyamine Additive Solvent-diluted Polyamide Resin
1) Label Adhesive for coating of face stock materials such as (Paper, PET, PE, Foil). 2) Tape Adhesive for coating on BOPP, double sided tape, medical coating, band-aids. 3) DIY floor adhesive for PVC floors. 4) Shoe Adhesive hot melt used for stitching 5) Bookbinding hot melt used for spine bonding. 6) Woodworking hot melt used for profile wrapping, panel assembly and edge banding. 7) Non-woven hot melt used for diaper construction, positioning and elastic 0.5kg/cake, 8kg/carton Flaky particles, 25kg/bag 180kg/steel drum
The heating apply one-part adhesive and sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings and various appliances.
one-part sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings, color steel plate, roof sealing and various appliances.
Application: outsole, exercise equipment (basketball for example), EVA form material etc. 1.The minimum quantities of per shipment is 1000kg. 2.In order to avoid the damage of products during transportation, the quantity have to multiple of 20kg. 3.Please send 30g samples of color master batch to us if you didn't purchase exceed 6 months.
Payment Term T /T BEFORE SHIPMENT Shipment BY Sea Port of loading : any port of TAIWAN Country of origin.: TAIWAN 1.The minimum quantities of per shipment is 1000kg. 2.In order to avoid the damage of products during transportation, the quantity have to multiple of 20kg. 3.Please send 30g samples of color master batch to us if you didn't purchase exceed 6 months.
Application: outsole, exercise equipment (basketball for example), EVA form material etc. 20kg/CTN.
Appearance: Slightly White Paste. Main Ingredients: Macromolecular Polymer, Water. Application: Direct use on printing, suitable for screen with 60~80 mesh. Suggested curing temperature is 90~120óJ for 60~180 seconds or naturally dried. Better to conduct transfer within 1~2days after printing to obtain the best transfer results. For foil transfer, suggested heat pressing condition is 150~170óJ for 12~15 seconds with pressure around 3~4kg. Suggested condition should be adjusted according to on site machines, operation and weather. 30KGS PE Drum.
