1) Label Adhesive for coating of face stock materials such as (Paper, PET, PE, Foil). 2) Tape Adhesive for coating on BOPP, double sided tape, medical coating, band-aids. 3) DIY floor adhesive for PVC floors. 4) Shoe Adhesive hot melt used for stitching 5) Bookbinding hot melt used for spine bonding. 6) Woodworking hot melt used for profile wrapping, panel assembly and edge banding. 7) Non-woven hot melt used for diaper construction, positioning and elastic 0.5kg/cake, 8kg/carton Flaky particles, 25kg/bag 180kg/steel drum
The heating apply one-part adhesive and sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings and various appliances.
one-part sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings, color steel plate, roof sealing and various appliances.
Appearance: Slightly White Paste. Main Ingredients: Macromolecular Polymer, Water. Application: Direct use on printing, suitable for screen with 60~80 mesh. Suggested curing temperature is 90~120óJ for 60~180 seconds or naturally dried. Better to conduct transfer within 1~2days after printing to obtain the best transfer results. For foil transfer, suggested heat pressing condition is 150~170óJ for 12~15 seconds with pressure around 3~4kg. Suggested condition should be adjusted according to on site machines, operation and weather. 30KGS PE Drum.
Main ingredients: Mineral paraffinic distillate Boron nitride. 40ml/250ml/ll.
1. High bondage strength with PVC, PU, EVA leather & TPR, 2. Good heat resistance level. No worries of loosening when over heat. 3. Good open time than normal PU adhesives. 4. Good freeze resistance level. No worries of freezing in temperature below -20 Centigrade degrees. 5. Guaranteed yellow turning resistant excellent quality stability.
Epoxy is substituted by DURAFLEX which has been launched and had excellent feedback from our customers. It's the environmental friendly, non-toxic paint which apply in multiple layers with smooth surfaces. Used as waterproofing coating and burnish surface coating in wet and fouling protection areas.
Hypercoat-688 is the range of high performance, seamless, cold-applied liquid water-proofing membrane. 1. Excellent hydrolysis resistance. 2. Still can curing when apply on the moisture surface without observed water. 3. The middle layer of the tile, the top coating or each cement-based finished surface.
Descriptiion CS-500 is a sealant mainly made by specialized rubber polymer, compatible with surface of various materials. Especially suitable for architectural expansion joint and crack repairing applications. Use 1.Used for sealing joints in applications such as curtainwall joints, metal panel joining,bedding thresholds,secondary glazing seals. 2.Standing seam roofs, side walls, gutters and downspouts sealing. 3.Filling and caulking joints in heating and air conditioning ducts. 4.Joint sealing in sheet metal. Feature 1.Excellent thixotropy,non-sagging during vertical application. 2.Good durability and flexibility. 3.Compatible with various kinds of paint. Color grey Packaging 300ml cartridge
Description CS-266 is solvent-free moisture curing PU adhesive. CS-266 temperature for foam or plastic, and products have properties as mentioned below : 1. Great curing speed. 2. Great bonding strength. 3. Great hydrolysis resistance. 4. Great weather resistance. 5. Great chemical resistance. Operation 1. CS-266 can be used by roller or knife coating. 2. After coating on the foamâ??s surface, then lamination stick with rollers. 3. Pressing the foam/foam at room temperature about 180 mins approximately, and initial binding strength can be obtained.
Description CS-613 is a multipurpose water-based epoxy sealer/putty/adhesive. Itâ??s developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. Itâ??s easy to mix even by hand due to our innovative water-based technology. Features / Benefits *Paintable easily with water-based coating; can be painted after 1 day without work delay hence reduce time and save money. * Easy to use: Compatible with damp surface, time is saved in waiting for it to dry up; Washable with water including tools. Best to wash as soon as possible before it hardens. * Smooth to tool with trowel; Non-sagging characteristic making it easy to use on vertical wall and ceiling. * Stronger adhesion due to higher amount of binders used. * High solid by volume; 100% water resistant when cured. * Low odor/ solvent free/ VOC free, it does not pose health hazard to user and dwellers.
