PCB, printed circuit board.
Double-layer & multi-layer PCBs, ceramic & aluminum substrate PCBs.
PCB.Manufacturer
Rigid PCBA, Flex PCBA, Metal Core PCBA, Functional Test & Box-Build
#Autodoor #AutomaticDoor #AutomaticDoorSystem
Wide variety of Metal Core PCBA : Aluminum, copper or iron
Single layer, double layer or multi-layer
single-layer, double side or multi-layer
Single Side : Maximum shipping Panel Size 470mm*570mm Finished Board Thickness : Minimum Board Thickness : 0.6mm+/-0.1mm , Maximum Board Thickness : 2.0mm+/-10% Dielectric Material : Heat Conductive Glue / FR4 Aluminum Type : 5052 Copper Thickness : 1/2~2oz Trace Width / Spacing : Minimum Line Width / Spacing(Internal&External) 0.1mm ,The tolerance followed by IPC-6012 Surface Finish : Immersion Gold(Ni/Ru) 0.025~0.1um /Lead Free HASL (Min. 2.5um)/OSP (Entek CU106A) 0.2~0.5um Solder Mask : LPI Test : Hi-Pot Test
Layers: FPC 1~4 L Finished Board Thickness with Copper : Min 0.075mm (1L) / Max 0.3mm (2L) Finished Board Thickness Tolerance: �±0.02~0.04mm Impedance Control :+/-10% Base Copper Thickness : Standard : 1/3oz,1/2oz,1oz / Spcial:2oz Base Film Thickness:Standard:0.5mil , 1mil / Special : 2mil Stiffener:PI / FR-4 /SUS Finished Hole Diameter:Min { }0.15mm / Max { }6.30mm Finished Hole Diameter Tolerance PTH�±3mil(�±0.075mm) npth�±2mil(�±0.05mm)
Layers : Sample 1~32 / Mass Production 1~20 Size :Max shipping size is 600mmx550mm , +/-0.15mm Finished Board Thickness: Min 0.4mm(4L)/0.6mm(6L),+/-0.1mm (Max) 3.6mm(2.2~3.6mm depends on material), +/-10% Copper Thickness :1/3~5oz (Depends on material) Impedance Control :+/-10% Via Holes (Min) : Mechanical Drill:0.2mm / Micro Via:0.1mm PTH+/-0.075mm NPTH +/-0.05mm Aspect Ratio : Sample :10:1 / Mass Production :8:1 Min Trace(Width/Spacing) : Internal 0.075mm / External 0.075mm The tolerance followed by IPC-6012 Advance Process : Blind Routing Cavity,Coil Board,Plug Hole With Epoxy,Half Hole Plated Spacing between Pads : Min :8 mil
Automatic PCB Lead Cutter > > Product No. : KA-66 FEATURES Best Selection for medium of high volume production. This model is designed to trim the extra long leads automatically and efficiently on the PCB that components inserted and soldered. A pair of conveyor chain is equipped in the model in which clamp and deliver the PCB to the blade turning in high speed for trimming. Warp prevention device is equipped to ensure no damage on boards. Expandable in function and working independently- The model can be optional connecting in line with wave soldering machine by Connection Bridge and operates automatically. The Tungsten Carbide Blade is excluded in the machine. SPECIFICATIONS Dimension:900(L) x 670(W) x 800(H) m/m Power:220V 50/60HZ,Net Weight:115Kgs Feeding Speed:0 - 3 m (Adjustable) RPM of Spindle:4500 HP:3/4 HP Min. Lead Height:1.0mm Min MAX.PCB Working Size:500mm(L) x 280mm(W)
NTG-520N Pre-scored PCB Depaneling machine/ de-panelizer. Separate PCB along with V grooves. [Feature] 1. Separating the V-cut panel boards in the principle of non-bending stress. 2. The knives are adjustable both in axial and radial directions. 3. The round knives separate the board within the V-groove. Slightly adjust according to PCB thickness. 4. The depaneling maximum of PCB width is 160mm, the PCB length is unlimited. [ Specification ] Powerï¼?110V/220V, 50/60HZ Dimensionï¼?(L)430 x (W)430 x (H)520 Weightï¼?36 kgs PCB thickness rangeï¼?0.8-2.0mm www.renthang.com renthang@renthang.com
NTG350 Pre-scored PCB Depaneling machine, PCB Separator: Pneumatic Type FEATURES The machine was designed to depanel pre-scored panelboards carefully, without bending or tension stress. Even sensitive SMD-Components like ceramic capacitors, will not be damaged by the depaneling process, or thin board even to 0.3mm cab be worked safely. Due to the special design of the knives also boards with high components placed close to the edges can be depaneled safely.Based on a proven method of depaneling, wedge-shaped knives are used to cut the panels within the groove. This enables the boards less than 1mm thickness to be separated safely and without creating stress. This machine is pneumatically driven using standard parts. It is noiseless operation with none of usual compressed air noises. Rigid design without vibration in operation The PCB with sensitive SMD capacitor or thin board even to 0.3mm can be worked safely.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine. Depaneling process without vibrations Pneumatic control placed in a separate unit for easier maintenance. SPECIFICATIONS â?¢Easy maintenance and operation. Air source¡GCompressed air 5kg/cm2 Dimension¡G(L) 720 x (W) 500 x (H) 1070 mm Weight¡G190Kgs Knife length¡G350mm PCB thickness range¡G0.3mm ~ 3.0mm www.renthang.com renthang@renthang.com +886-2-82011187
Name: Communication Module Board Number of layers: 4 layers Material: FR-4 Board thickness: 1.6mm Surface Plating: Immersion Gold Special Process Description : 0.25BGA Special technology explanation: Black Matte Ink, gold thickness 5M Most important key points of OEM 1.FR4, Ceramic, High TG, Rogers, High Frequency RF, Halogen free, Aluminum-based PCB etc. available. 2.This FR4 PCB can be up to 32 layers. 3.ENIG, lead-free HASL, gold flash, OSP, gold finger, Hard & Soft Gold, immersion gold/silver/tin surface finish etc. available 4.Copper thickness is 1 to 6oz on the inner layer and 0.5 to 5oz on the outer layer. Has 3mil minimum line width and spacing, and as small as 0.2mm holes. 5.Board thickness: 0.3~3.5mm 1. 13 years professional PCB/PCBA manufacturing experience. Specializing in electronics manufacturing service including electronic design and engineering, PCB Fabrication & Assembly, SMT, custom printed circuit board products, One-stop cost-effective PCB Solutions, Electronic Components Procurement, prototyping, turnkey solution and other value-added service. 2. Excellent and high process capability, Specialized in 2 to 32 layer PCBs, FR4, Ceramic, High TG, Rogers, High Frequency RF, Halogen free, Aluminum-based PCB etc. available, with 3mil minimum line width and spacing and as small as 0.2mm holes. Copper thickness is 1 to 6oz on the inner layer and 0.5 to 5oz on the outer layer. 3. International quality & environment certifications. GX quick has been certificated by international quality & Environment systems such as ISO9001, ISO14001, SGS, RoHS, UL etc. 4. A large number of advanced equipment imported from the United States, Japan, Germany, Israel . Sophisticated equipment is gradually introduced to ensure excellent manufacturing process capabilities, such as: 1) Drilling machine 2) Full automatic plating line 3)Figure electric automatic line 4) Punching machine 5) Digital control routing machine 6) PTH 7) Antioxidant treatment line 8) Full automatic digital control V-CUT machine 9) Lami-machine 10) AOI testing machine 11) CCD-Exposal room 12) Automatic dry film machine 13) High speed flying probe machine 14) Fully automatic temperature control baking ovens. 15) Dedicated testing machine 5. Free samples with sample costs refunded after confirmed standard order, 24-hour quick-turn service. 6. High quality raw materials from top suppliers for laminates, copper foil, PP and more. Quality goal Total scrap rate â?¦ 1.8% customer satisfactionâ?§90% Template punctuality delivery rate â?§ 98% batch punctuality delivery rate â?§ 92% Customer complaint rate â?¦ 1% customer return rate â?¦ 0.5% Comprehensive Qualified rate â?§ 98% batch board utilization â?§ 90% Pre-launch rate: â?¦ 3% backwash solder mask â?¦ 3%, circuit â?¦ 2.5%
Name: Tablet PC motherboard Number of layers: 6 layers Board thickness: 0.8mm Surface Plating: Immersion gold Special Process Description: 0.25BGA Min. line width/spacing 4mil/4mil Min. across hole 0.2mm Factory Advantages: 1. 13 years professional PCB/PCBA manufacturing experience. Specializing in electronics manufacturing service including electronic design and engineering, PCB Fabrication & Assembly, SMT, custom printed circuit board products, One-stop cost-effective PCB Solutions, Electronic Components Procurement, prototyping, turnkey solution and other value-added service. 2. Excellent and high process capability, Specialized in 2 to 32 layer PCBs, FR4, Ceramic, High TG, Rogers, High Frequency RF, Halogen free, Aluminum-based PCB etc. available, with 3mil minimum line width and spacing and as small as 0.2mm holes. Copper thickness is 1 to 6oz on the inner layer and 0.5 to 5oz on the outer layer. 3. International quality & environment certifications. GX quick has been certificated by international quality & Environment systems such as ISO9001, ISO14001, SGS, RoHS, UL etc. 5. Free samples with sample costs refunded after confirmed standard order, 24-hour quick-turn service. 6. High quality raw materials from top suppliers for laminates, copper foil, PP and more. Most important key points of OEM 1.FR4, Ceramic, High TG, Rogers, High Frequency RF, Halogen free, Aluminum-based PCB etc. available. 2.This FR4 PCB can be up to 32 layers. 3.ENIG, lead-free HASL, gold flash, OSP, gold finger, Hard & Soft Gold, immersion gold/silver/tin surface finish etc. available 4.Copper thickness is 1 to 6oz on the inner layer and 0.5 to 5oz on the outer layer. Has 3mil minimum line width and spacing, and as small as 0.2mm holes. 5.Board thickness: 0.3~3.5mm Our Excellent service Advantage-Why choose us? Package: PE + Cartoon 1. Finished Board 2. Packed in anti-static bag 3. Bubble pack 4. Packed in cartoon 5. Packed in strap Shipping Port: Hongkong/Shenzhen China Lead Time(working day) under Standard Production: Single Sided(5-7days) Double Sided(5-7days) 4 Layers(10-12days) 6 Layers(11-13days) 8 Layers(11-13days) 10 Layers(12-14days) Payment Method: T/T, Paypal, Western Union, Visa, L/C Payment Term: For samples, we deliver it to customer by UPS, Fedex, DHL, TNT or EMS. For mass production order, we deliver to customer by air or by sea.
Place of origin: taiwan Copper thickness: 0.45 mils - 14 mils Board thickness: 280 mils (max finished board) Inner line width:
Place of origin: taiwan Brand name: fr4, rogers, isola, etc. Copper thickness: 0.45 mils - 14 mils Board thickness: 280 mils (max finished board) Min. Hole size:
Place of origin: taiwan other gold, immersion tin & silver, & osp Maximum layer count, prototype: 40 or more layers Max. Board size: 18 x 24 inches Bow and twist: max 0.1% Drilled via size: 2 mils Annular ring: 1.5 mils Inner line width:
Place of origin: taiwan Base material: varied Copper thickness: 0.45 mils - 14 mils Annular ring: 1.5 mils Inner line width:
