Car electronic part.
Car exhausts system.
Auto parts, car accessories, LED lamp.
Car parts, motorcycle parts, car engine parts, auto parts, aftermarket parts, diesel parts, diesel engine parts, engine valve, engine guide, engine seats, truck parts, agriculture parts, marine engine parts.
A. Baby blanket -size: 28x 38 +/-5% -warmly, softy and lightly -made in taiwan -sgs approval -taiwan textile research institute approval -pictures as below -size: 28¡¨ x 38¡¨ +/-5% -weight: 0.7kgs
Car Dvd Players, Car Alarms, Car Rear view camera, Car DVR, Laptop batteries, Power tool batteries, camcorder batteries, Adapters and chargers.
(1) early in-house engineering and design evaluation to enhance design flexibility and to eliminate the need of additional operation. (2) project management and scientific mold building design for manufacturability (dfm) (3) material selection suggestion to maintain part tolerances and tooling reliability (4) improving part strength and structure to assure the quality, reliability and integrity of the end product. Please visit our web site at www (dot) pyramids (dot) com (dot) tw for more information. ---custom-made order acceptable. Please send us drawings for quotation.
Specifications Operating environment (Receiver Unit) • Operating temperature range -20 deg to 80 deg C • Storage temperature range -20 deg to 85 deg C • Operating humidity 100% • Vibration 3.5mm 10 Hz in X,Y and Z direction. Power (Receiver Unit) • Power Required 12V DC (MiniDC jack) or Battery DC 3V • Battery Life: Approx. 6 Months • Battery type AAA 1.5V (x2). Dimensions Monitor (Receiver Unit) • Weight 60 g • Size L 63mm * W 42.5mm* D 20mm • LCD View size L 33.5mm * W 28.2mm. System (Receiver Unit) • System frequency at 433 MHz • Sensor pressure range 0-60 psi • Sensor pressure sensitivity ± 1.5 psi • Sensor temperature sensitivity ±2 deg C • Low power consumption in sensor • Transmission length: up to 10M (Can vary between vehicle's). Emissions (Receiver Unit / Sensors) • FCC Comply with part 15,Class B • CE • C Tick. Operating environment (Sensors) • Operating temperature range -40 deg to 125 deg C • Operating humidity 100% • Shock >1000G from 1.5m height • Vibration 10mm 5-200 Hz in X,Y and Z direction Power (Sensors) • Sensor is equipped with battery - CR1632 (3V) • Battery Life - Approx. 1 Year. Dimensions Sensor (Sensors) • Weight - 10g±1 g • Size - Diameter 18.5mm / Height 20mm.
Velcro hook and loop fastener Width: 16/20/25/30/38/50/100mm (75/125/150mm) Available funchtion tape: 1. Sew on hook and loop 2. Self-adhesive hook and loop 3. Back to back hook and loop 4. Fire retardant hook and loop 5. Hook & loop combination tape 6. High frequency weldable tape 7. Soft hook hook 8. Mushroom hook 9. Molded hook 10. Elastic loop 11. Non-brushed loop 12. Brushed fabric 13. Wire / cable strap 14. Self-adhesive shaped hook and loop Application: Garment, shoe, bag, stationery, healthcare, baby products, sporting goods, strap, toy, car etc. 25 meters/roll, ctn: 51x25.5x57cm Mm 16 20 25 30 38 50 100 M/ctn 1500 1200 1000 800 600 500 250
Auto parts, truck parts.
BRAND: "RING" water hammer arresters pressure relief valve pressure sustainning valve pressure reducing valve eccentric plug valve resilient seated gate valve resilient flapper check valve and so on
BRAND: "RING" Cast iron/ductile/stainless steel /aluminum wafer-type butterfly valves - renewable seat, center driver disc or eccentric driver disc - lever or gear operation - anti-condensation design available
LIZARD Brand Brake Pad integrated the advantages and characteristics of different materials in perfect balanced. We have different product series for Japanese, Continental sedan and 4x4 cars i.e. U350, M400, M600 and R800 series for Urban, Moutain Raod, Street Racing, and Car Racing conditions. E1, ASSA, EAC, IATF, US AMECA and ISO 9001-2015.
Auto parts like brake pad, lizard brand brake using composite materials for urban, moutain raod, street racing and car racing conditions for senda, 4x4 japanese and continental cars. produt with e1, assa, eac, iatf, us ameca and iso 9001 2015..
Design and manufacture for all kinds of LCD hinge, NB hinge, 3C hinge, GPS hinge, PDA hinge. Specialize production for computer, camera, electron, car and motorcycle metal accessories. All the units can be custom-made to satisfy your need.
LR9150 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance * GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy * High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm * 52 track verification chann els * SBAS (WAAS or EGNOS,MSAS) * Active Jammer Remover, removes in-band jammers up to 80 dB-Hz * Tracks up to 8 CW jammers * Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. * Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. * SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. * Reacquisition Time : 0.1 second * RF Metal Shield for best performance in noisy environments Hardware and Software * Based on the high performance features of the SiRFstarV low power single core logic. * Adaptive micropower controller * Only 50 to 500�¼A maintains hot start capability (core logic) * < 10mW required for TricklePower mode * RoHS compliant (lead-free) * SMT pads allow fully automatic assembly processes equipment and reflow soldering * Advanced navigation features * Smart sensor supported by I�²C interface * External interrupt input for context change detection Advantages * Built-in LNA. * Built-in internal ROM and based on Firmware 5.5.X * It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. * Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) * Support SiRFaware technology * Support adaptive Micro Power Controller power management mode. * < 10mW TricklePower, so user can leave power on all day instead of power off. * Suitable for battery drive devices that need lower power consumption application * Cost saving through elimination of RF and board to board digital connectors * Flexible and cost effective hardware design for different application
This antenna system consists of two functional blocks, the LNA portion and the patch antenna. CONFIGURATION RF Cable - RF Coaxial Cable, 2.7± 0.2mm - Cable Length : 5M ± 5cm - RF Connector : SMA 180(M) / MCX 90 (M) GENERAL ENVIRONMENTAL CONDITIONS - Operation Temperature : -40 to + 85 - Storage Temperature : -40 to + 85 - Relative Humidity : 40% to 95% ELECTRICAL SPECIFICATIONS - Input Voltage : Min:2.5V Typ:3.0V Max:5.5V - Power Consumption : Typ: 10mA. Max: 15mA. @3.0V ANTENNA - Antenna Dimensions : 25 x 25 x 4 mm - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - GAIN : 1575.42MHZ : -3dBi Typ. @zenith 1602MHZ : -5dBi Typ. @zenith - Polaration : RHCP LNA and FILTER - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5) 1602MHz:28 dB Min.30 dB Typ.( + 25 ± 5) - Noise Figure : 2.0 dB Typ. ( + 25 ± 5 ) / 2.6 dB Max. ( + 85 ) - Out Band Rejection : 1587.5 ±140MHz 15dB Min - Output Impedance : 50 - Output VSWR : 2.0 Max TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain : 1575.42MHZ: 27± 3dBi @zenith 1602MHZ: 29.5± 3dBi @zenith - Output Impedance : 50 - Output VSWR : 2.0 Max
This antenna system consists of two functional blocks, the LNA portion and the patch antenna. CONFIGURATION RF Cable - RF Coaxial Cable, 2.7± 0.2mm - Cable Length : 5M ± 5cm - RF Connector : SMA 180(M) / MCX 90 (M) GENERAL ENVIRONMENTAL CONDITIONS - Operation Temperature : -40to + 85 - Storage Temperature : -40 to + 80 - Relative Humidity : 40% to 95% ELECTRICAL SPECIFICATIONS - Input Voltage : Min:2.5V Typ:3.0V Max:5.5V - Power Consumption : Typ: 10mA. Max: 15mA. @3.0V ANTENNA - Antenna Dimensions : 25 x 25 x 4 mm - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - GAIN : 1575.42MHZ : -3dBi Typ. @zenith 1602MHZ : -5dBi Typ. @zenith - Polaration : RHCP LNA and FILTER - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5) 1602MHz:28 dB Min.30 dB Typ.( + 25± 5) - Noise Figure : 2.0 dB Typ. ( + 25 ± 5) / 2.6 dB Max. ( + 85 ) - Out Band Rejection : 1587.5 ±140MHz 15dB Min - Output Impedance : 50 - Output VSWR : 2.0 Max TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain : 1575.42MHZ: 27± 3dBi @zenith 1602MHZ: 29.± 3dBi @zenith - Output Impedance : 50 - Output VSWR : 2.0 Max
This antenna system consists of two functional blocks, the LNA portion and the patch antenna. CONFIGURATION RF Cable - RF Coaxial Cable, 2.7± 0.2mm - Cable Length : 5M ± 5cm - RF Connector : SMA 180(M) / MCX 90 (M) GENERAL ENVIRONMENTAL CONDITIONS - Operation Temperature : -40 to + 85 - Storage Temperature : -40 to + 85 - Relative Humidity : 40% to 95% ELECTRICAL SPECIFICATIONS - Input Voltage : Min:2.5V Typ:3.0V Max:5.5V - Power Consumption : Typ: 10mA. Max: 15mA. @3.0V ANTENNA - Antenna Dimensions : 25 x 25 x 4 mm - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - GAIN : 1575.42MHZ : -3dBi Typ. @zenith 1602MHZ : -5dBi Typ. @zenith - Polaration : RHCP LNA and FILTER - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5) 1602MHz:28 dB Min.30 dB Typ.( + 25 ± 5) - Noise Figure : 2.0 dB Typ. ( + 25 ± 5) / 2.6 dB Max. ( + 85 ) - Out Band Rejection : 1587.5 ±140MHz 15dB Min - Output Impedance : 50 - Output VSWR : 2.0 Max TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector) - Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz - Gain : 1575.42MHZ: 27± 3dBi @zenith 1602MHZ: 29.5± 3dBi @zenith - Output Impedance : 50 - Output VSWR : 2.0 Max
Main Technical Specification - Frequency Range (MHz) : 434 - Bandwidth (MHz) : ±3 - VSWR : 2.0 - Gain(dBi) : 1.80 - Max Input power (W) : 50 - Input Impedance () : 50 - Polarization Type : Vertical - Antenna Length(mm) : 88mm(90) / 108mm (180) - Connector Type : SMA