SMT-402 SMT Semi-automatic Pick and Place Machine with dispenser. Bench-top and compact size is great for R&D and studio. FEATURES SMT-402 has the function to suck SMT component taping and spot glue on the PC board. Operation with step pad switch to Spot glue SMT component rapidly. The operation function could be separated or combined Sliding axial X and Y. Suitable for sucking and taping small size SMT component Feeder frame could turn around 360 degree, 90 kinds of components could be operated. 16 sets SMT tape reel material could be loaded. uitable for any reel size. Available for sample design, especially for changeable small quantity multi style production. SPECIFICATIONS Power: AC 220 V 50 / 60HZ Dimension: 800 x 720 x 300mm Weight: 22 KGS Air Source: 4 ~ 5 Kg / square cm Feeder: 16 Sets Material Box: 90 pieces MAX. PCB Working Size: 250 x 300mm www.renthang.com renthang@renthang.com +886-2-82011187
SMT-401 SMT Semi-automatic Pick and Place Machine. Great for R&D and prototype. FEATURES Available for sample design, especially for changeable small quantity multi style production. Sucking quickly the SMT component and taping on the PC board. Sliding axial X andY. keep the SMT component will not vibration when it is Taped on the board. Feeder frame could turn around 360 degree, 90 kinds of components could be operated. 16 setsSMT tape reel material could be loaded. Suitable for anyreel size. Vacuum pipe could suck different size SMTcomponent. Several machine connected could offer bigvolume and efficiency production only small vestment. SPECIFICATIONS Power: AC 220 V 50 / 60HZ ( depends on Country) Weight: 22 KGS Dimension:800x 720x 300mm Air Source: 4 ~ 5Kg / squared cm Feeder:16 Sets Material Box: 90 pieces MAX. PCB Working Size: 250 x300mm Capacity: 20~50pcs / Minute www.renthang.com renthang@renthang.com +886-2-82011187
Capacity: 0~3mm Speed: 0~11000rpm Voltage: 1ph, 100v~240v; 50/60Hz Table size: 100*70*8mm Non load motor: 670W 6.0A 1. Adopt with BOSCH main engine. 2. Available for chamfering steel, iron, casting iron 3. The operation is convenient, processing the stability.
Working principles: The surface jet aerator is horizontal aerator is used in pretreatment for mixing, secondary and tertiary treatment for oxygen transfer and aquaculture aeration. During the propeller rotates to create the negative pressure, the air is drawn into the shaft and dispersed it into the water in a horizontal direction. The air past the propeller and mix with the fluid will establish micro and high velocity bubbles into the water. The surface jet aerator installations can completely or partially mix very large volumes of water at lowest installed power, and provide excellent turndown capabilities the surface jet aerator ranges from to 50 hp and can be mounted on floats, fixed to a bridge or wall etc. It can also be easily installed in fluctuating water level situations advantages for various Applications: 1. Oxidation ditch: The ra surface jet aerator is most suitable for oxidation ditch special design and shape due to the powerful horizontal mixing capacity. 2. Aerated lagoons: The ra surface jet aerator provides horizontal flow and strong mixing is that often to use on various depth aerated lagoons. 3. Traditional aeration tank: The ra surface jet aerator often be utilized in traditional tank for activated sludge or digester. The unit can provide the complete mix and eliminate the blind point. 4. River and canal restorations: The ra surface jet aerator can improve the water quality in lake, canal and reservoir. The ra surface jet aerator can easy and flexible install on floating, bridge and wall. 5. Aquaculture: The ra surface jet aerator provide the minimal maintenance and superior performance ( oxygen supply and mixing) for fish and shrimp farm.
Use Japan Mitsubishi servo motor & Comparable software technic. Wooden Case200cm*150cm*200cm
Centerless grinding machine With high tolerance, accuracy and precission
High speed extrusion lines Features: The extrusion machine is designed for producing pp/hdpe flat yarn. Maximum pp melting output. Capacity is 150350 kg.Hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements Tensile strength 4.5kg-5kg per 1.000 denier Special request 6.5kg per 1.000 denier Flat yarn denier : 700-1.500 denier Special request : 1.000-6.000 denier Stretching ratio : 3-9 times Quenching system : water bath or chill roll
FEATURES: The extrusion machine is designed for producing PP/HDPE flat yarn. Maximum PP melting output. Capacity is 100-150&200-300 kg.hr, and the unit is equipped with a tube filter and rotary blade slitting system. The machine has less down time and prevents production loss. The pressure rollers of the take-off unit are pneumatically controlled, and have synchronized control electronic system. European screw, gearbox, static mixer, auto screen filter changer and human machinery interface fibrillator are available to meet special requirements. Tensile strength 4.5kg-5kg per 1.000 Denier Special request 6.5kg per 1.000 Denier Flat yarn denier : 700-1.500 Denier Special request : 1.000-6.000 Denier Stretching Ratio : 3-9 Times Quenching system : water bath or chill roll
Features: The recycle plant designed for reproducing general kind of waste products such as: waste pp/hdpe films, flat yarns, woven bags, woven sheets, bad quality products and so on. The production out is 80 kg/h-260 kg/h
Mini air compressor Specifications: -AC power: 95W -Max pressure: 40PSI -Weight: 4kg,1/8 HP -Electrical current: 0.6A -Capacity: 2.0CFM -Pressure regulator: Usually 25-30 PSI -Air conduit: 1/8NPT x 28 compatibale with Japan or U.S.A. made jet pens. 1 pcs/color box,26.5x13.6x21.2cm, 4pcs/ctn/1.3' Nw:17kgs, gw:18kgs
IR Thermal-Imaging System - Non-radiative,non-contact,high-resolution Specification: View angle :> 12 x 12 degree Temp. Res. < 0.1 degree 50KG, 2.25M square
Used for welding,cutting,drilling 300KG, 6M square
Micro computerized digital screen display control system. Wooden cases.
Our thread rolling machine with high speed and stability, and provides various detection and customization options.
SEEDTEC YRG-06 Rotary Surface Grinder - Ram type with surface grinding diameter 600 mm, adopted Direct Drive spindle. Accuracy of Table surface 2 and Downfeed (minimum unit) 1. Vertical driven by AC servo motor. Cross and rotary table are driven by servo motor. Rotary table with constant peripheral velocity. Linear guide way with extra large block for vertical axis.
SEEDTEC YRG-06 Rotary Surface Grinder - Ram type with surface grinding diameter 600 mm, adopted Direct Drive spindle. Accuracy of Table surface 2 and Downfeed (minimum unit) 1. Vertical driven by AC servo motor. Cross and rotary table are driven by servo motor. Rotary table with constant peripheral velocity. Linear guide way with extra large block for vertical axis.
SEEDTEC NSG-618TS #SurfaceGrinder - Saddle type is mirror grinding with grinding capacity L x W: 470 mm x 150 mm, adopted Direct drive spindle. Accuracy of Table surface 2 and Downfeed (minimum unit) 0.1. Cross feed driven by simplified AC servo motor, Vertical axis driven by AC servo motor, Longitudinal by advanced table hydraulic design. 3 axes are box ways.
SEEDTEC APS-818P #SurfaceGrinder - Saddle type is fully auto-2/3 axis servo machine with grinding capacity L x W: 460 mm x 200 mm. Adopted Direct Dirve spindle. Accuracy of Table surface and Downfeed (minimum unit)1 Cross driven by servo motor and longitudinal driven by hydraulic. APS series linear guide way with extra large block for vertical axis and another two axes are box ways.
SEEDTEC APS-1640S Surface Grinder - Saddle type is fully auto-2/3 axis servo machine with grinding capacity L x W: 1000 mm x 400 mm. Adopted Direct drive spindle, Accuracy of Table surface 5 and Downfeed (minimum unit)1. 3 axes driven by servo motor. Linear guide way with extra large block for vertical axis and another two axes are box ways.
SEEDTEC YSG-618H/AH Surface Grinder - Saddle type is semi-auto machine with grinding capacity L x W: 465 mm x 150 mm, adopted cartridge-type spindle. Accuracy of Table surface 2¼ and Downfeed (minimum unit) 5¼. 3 axes are box ways. Longitudinal by advance table hydraulic design.