Expandable hose Length : 7.5mm , 10mm , 3.8mm , 5.8 mm Material : TPE Polyester The new elastic G-hose can be extended by two times, from 7.5 to 15 meters, compared to conventional hoses that are prone to elastic fatigue and cracks caused by. The specially structured joint in G-hose perfectly prevents water leak no matter how long it has been used. Smooth, compact surface makes G-hose unlikely to tangle, but easy to retract into our company patented hose reel.
Heavy duty hose 50ft aluminum connector color box 400PSI 50ft color box packing
CV-SKH-50ft Flat soaking hose 50ft
cooling misting kit 50ft CV-CMH50ft
CV-AHS-2m Aluminum flexiable 4-way misting&sprinkler stand 2m
Model no.: table stage for ic Made in taiwan, roc Anti-adhesion processing with tsk Spec Bw :clear Heat-resistant range :1000 celsius degree Key features Nano sic anti-sticking surface processing for semiconductor optoelectronic areas such as large panel sucker, semiconductor wafer vacuum sucker. There are many types of wear mechanisms including adhesive, abrasive, erosive, capitation, and fretting.In many cases wear can occur from a combination of these mechanisms.Understanding the factors that are causing wear to occur is very important to engineering the proper wear resistant coatings. Payment terms:da , tt , l/c
Model no.: tensky Made in taiwan, roc Key features This product complies with the eu rohs directive. The high-tech nano paint achieves energy conservation and environmental protection by converting heat into energy when it is applied to the mechanical cooling systems and fuel systems.
Model no.: ceramic coating, esd coating Made in taiwan, roc Painless surface treatments with tsk Key features We produce ceramic coating parts to any kind of materials. The base of materials such as : al2o3 , sic , zro2 , al , stainless...Ceramic and metal parts. What we can coating for: al2o3 , sic , zro2, ptfe , y2o3 , sio2 , dcf series and others materials... Why need to coating? for insolution , esd and plasma, grinding , high temperature , acid resisting , alkali resisting , cost down...And others... Payment terms: d/a , t/t , l/c
Made in taiwan, roc Painless surface treatments with tsk Spec Size :barrel Key features Given the growing graphite is widely applied in industry, lack of material there to shake chuchen, the division began to develop the graphitesurface treatment to solve this problem, do vgi or sic for the graphite surface treatment technology has further breakthroughs can be applied to semiconductors, optoelectronics other industries. Vgi is mainly used in surface treatment temperature below 600 degrees environment. Sic is mainly used in surface treatment temperature below 1300 degrees environments.
Given the growing graphite is widely applied in industry, lack of material there to shake chu chen, the division began To develop the graphite surface treatment to solve this problem, do vgi or sic for the graphite surface treatment Technology has further breakthroughs can be applied to semiconductors, optoelectronics other industries. Vgi is mainly used in surface treatment temperature below 600 degrees environment. Sic is mainly used in surface treatment temperature below 1300 degrees environments.
According to your need According to your need
Multi-touch screen, digital signage, multi-touch kiosk, TV wall, video wall, transparent screen, touch frame.OEM and ODM
Metal furniture & accessories, bathroom articles, stationery, computer table.
Lock and hardware, stationery and gift, promotion item.
Various designs applied for small to large spaces in various industries. Renewable by microwave or oven, within only several minutes. Non-Tocix, Biodegradable and Eco-Friendly, holding worldwide patents. Prices are 4.95~ 15 US dollars per unit, based on differeint applications.
Description 1. Tough film and good adhesion on the concrete, able to penetrate into concrete. 2. Good resistance to water , brine and chemicals. Excellent mechanical strength and physical properties. 3. Good resistance to impact and abrasion. 4. Easy application , drying fast. Prepare to use 1. Mix base and hardener by the mixing ratio and Stir thoroughly, then setting at least 15 minutes. Thinner may be used to reduce viscosity. 2. Remove all foreign particles, oils, grease , rust and moistures from the surface before application. 3. Two packs product, must be used completely during the duration of its pot life. 4. Donâ??t apply when the temperature is < 10â??,>40â??, relative humidity is >90â?? or the surface temperature of substrate is not higher than the dew point for at least 3â??. 5. If the coating interval is exceeded , the surface of base coat must be roughened to insure adhesion. 6. Keep away from heat, sparks and flame. 7. Stored with good ventilation. 8. Keep adequate ventilation during application. 9. The actual coverage may vary, depending on application technique, job conditions and type of surface. Under brushing & rolling application the actual coverage is estimated at 70% of the Theoretical coverage and 60% for spraying. **The parts of data base above could be affect by application condition at job site, please reference guide specification or contact with relative technical personnel. Color : Clear Drying time : Tack-free : 2 hours Hardness : 8 hours Full cure : 7 days (grease)
DESCRIPTION CC-604SP is two component water based epoxy primer, composed from water based of liquid epoxy resin and hardener. APPLICATION 1. To prime the surface and help the following application procedure to mold and decorative coating. 2. Highly resist to chemicals in non-circulated places. 3. With well adhesion ability with epoxy system or PU system application. 4. Suitable for hospital, operation room, food factory to prevent the mold, dust and bacterium. CHARATERISTIC 1. Able to be diluted by water. 2. Anti- efflorescence , suitable for the environment with highly hygienic request. 3. Good adhesion to the moisture surface, can take as the primer for solvent-free or solvent-based epoxy resin.
CS-613W is 2-component water-based premium epoxy product. CS-613W as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements other than being used as admixtures, CS-613W is used partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As water based primer. Can be applied with damp surface. FEATURE Weatherproof and waterproof of capabilities that help prevent the deterioration of the ground-coat material. Low odor. Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
CA-010P as a water-based primer in relation to water absorption reduction and increase the bonding strength of cement to reinforcements other than being used as admixtures increase the mechanical properties and the adhesion of the hardened material. AREA OF APPLICATIONS Repair mortar for concrete areas Industrial flooring Bonding agent for new to old concrete Enhance adhesion strength of mortar
DESCRIPTION Bituminous Primer is product containing oxidized bitumen and a mix of technical quick drying solvents. APPLICATION Bituminous Primer is recommended to block the dust and the porosity of concrete surfaces allowing the quick application o f the bituminous polymer membranes, both with flame application and cold bonding with bituminous sealants or with self adhesive membranes.Bituminous Primer allows quick film drying, has an excellent penetration and adhesion to the support for the absence of surface stickiness. INSTRUCTIONS FOR USE Concrete surfaces must be dry, clean and free from oil, dust or release agents. This type of primer is ready for use after mixing it. Bituminous Primer can be either sprayed or applied by means of roller or brush. In case of hot application of membranes with flame, the primer can be used only if surfaces are completely dry. On the contrary, if the surface is damp, it is recommended to use a bituminous primer specific for damp surfaces. The drying time depends on concrete porosity, on the quantity of product applied and on the temperature of both the surface and the environment. Usually the film gets dry after 2-4 hours from the application. The drying time can increase in case of cold temperature and with low a bsorption surfaces. PACKING 5 gallon Bucket SHELF LIFE The product can be stocked in closed buckets and in dry area, far from UV rays for 12 months. TOOL CLEANING After use clean tools with common solvents.
