500ml highly pigmented protective coating for steel and alloy wheels. High-quality, quick-drying nitro combination paint, weather-resistant, lightfast and non-yellowing. Size 500ml
RUBEX-OEL wood coating is an environmentally friendly Carbolineum replacement product in rosewood tone, low odor and quick drying for outdoor use. Size 5 litres 10 litres 25 litres RUBEX-OEL wood coating is an environmentally friendly carbolineum substitute product in rosewood tone, low odor and quick drying for outdoor use. Penetrates deep into the wood and provides a water-repellent effect, effectively protects old and new wood against weathering, rot and fungal attack. Color: brown. Not suitable for benches, tables, chairs, etc. Weight n/a Size 5L, 10L, 25L
For larger repairs to car bodies, boat hulls, fiberglass parts, plastic housings and sheet metal parts. Can be applied in several layers. Fast-curing, sandable, easy to use. Includes fabric and hardener. Polyester repair resin is a highly reactive polyester resin - suitable as a fiberglass laminate for repair purposes - adhesion to other polyester resins - adhesion to almost all metal surfaces. For repair purposes such as rust holes in metal surfaces, e.g. car bodies. For repairs to plastic parts e.g. bumpers, GRP parts. DOSAGE: Add 2-3% by weight of hardener paste. Avoid overdosing the hardener paste. This can lead to bleeding and color changes in the top coat system. POT LIFE: At +20C room temperature, approx. 7 minutes. REACTION TEMPERATURE: at least +5C. APPLICATION: by brush YIELD: 3 times the mat weight or 1 time the fabric weight.
Rust protection film for the treatment of all metals. For surfaces that cannot be provided with a permanent surface protection. Protection period: Up to 2 years when stored indoors, 6-10 months when stored outdoors. Size 400ml
Colorless special adhesion promoter (primer) for almost all types of plastics. Transparent for subsequent painting. Sand plastics and prime once with primer spray. Size 400ml
Well-adhering cutting oil foam for targeted application to the area to be worked on. Lubricates and cools cutting tools when drilling, thread cutting, turning, milling, sawing, etc. Extends tool life, water-soluble and washable with clean water. Biodegradable, free from chlorine, sulphur and mineral oils Weight 0.5kg Size 500ml
Winstrip A2 KNG 300 pasty from Winoil is a ready-to-use, pasty paint stripper that is used to remove paint and adhesives Size 1 litre 5 litres 15 litres The product is suitable for both indoor and outdoor use. It dissolves practically all coatings and adhesives such as oil paints, synthetic resin, nitro, dispersion and stoving varnishes, 2-component and powder coatings as well as 2-component adhesives. It can be used on most surfaces, e.g. stone, wood, metals, etc. Plastic and rubber surfaces (PE, HPE, PP, PVC and natural rubber) can also be stripped/stripped, but preliminary tests are recommended. Weight 1 kg Size 1l, 5l, 15l
Size 5 litres 10 litres 25 litres 200 litres Winstrip KAL 1200 cold paint stripper "PH 12-14 strongly alkaline" Specially developed for modern powder coatings. Can be used at temperatures up to approx. 35�°C. (The product evaporates more quickly at higher temperatures) The product is ideal for parts made of iron, steel, aluminum, zinc, chrome, etc. Call us and we will be happy to advise you
Winstrip 2 phase hot paint stripper Alu B Size 5 litres 10 litres 25 litres 200 litres Winstrip 2-phase hot paint stripper "for aluminum" Phase B "PH 10-12 alkaline" Highly alkaline hot paint stripper. Used in the dipping process. Very quickly removes dried KH, nitro and 2-component paints. Suitable for removing paint from aluminum and metal parts. Optimal effect at 40-80C, ideal for paint stripping systems. Call us and we will be happy to advise you
Winstrip 2 phase hot paint stripper Alu A Size 5 litres 10 litres 25 litres 200 litres Winstrip 2-phase hot paint stripper "for aluminum" Phase A "PH 10-12 alkaline" Highly alkaline hot paint stripper. Used in the dipping process. Very quickly removes dried KH, nitro and 2-component paints. Suitable for removing paint from aluminum and metal parts. Optimal effect at 40-80�°C, ideal for paint stripping systems. Call us and we will be happy to advise you. Size 5L, 10L, 25L, 200L
Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Size 750ml 5kg Protects metal from tarnishing, for painting or spraying, for indoor and outdoor use. Zapon varnish is a colorless, non-yellowing protective coating for all bare iron and non-ferrous metals. The original appearance of the surface is not changed.
Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats. Size 5 litres 10 litres 25 litres Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats of paint. Works as a pore-spanning and sealing agent for highly absorbent substrates. On concrete, sandstone, cement, sand-lime brick, Eternit, plaster, etc. (Strongly crumbly substrates cannot be solidified. Weight n/a Size 5L, 10L, 25L
Fast-drying, water-clear and easily sandable wood primer for all hard and soft woods indoors. Size 750ml 5 litres 25 litres Fast-drying, water-clear and easy-to-sand wood primer for all hard and soft woods indoors. The pores are sealed so that the subsequent varnish has better filling properties. Protects the wood from moisture and prevents the varnish from sinking. For all wood and wood materials. Weight n/a Size 750ml, 5l, 25l
Winoil solvent-based insulating primer for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Size 1 kg 5kg 10kg 20kg Winoil insulating primer based on solvents for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Can be used as a primer outdoors. Wood can be insulated against the penetration of the wood's ingredients. Winoil insulating primer can be painted over with any conventional solvent-based or emulsion paint. Can be painted over after approx. 20 minutes. Color: White Weight n/a Size 1kg, 5kg, 10kg, 20kg
Fibers like synthetic, polyester and viscose..
Fabrics like cotton, polyester and silk.
Peel-off varnish liquid film protects surfaces from any contamination. Size 5kg 10kg 20kg Peel-off paint "liquid film" protects surfaces from any contamination. The applied paint hardens after application and can be removed by simply peeling it off. For smooth, non-absorbent surfaces. For covering metal parts such as hinges, windows and door handles, machine parts, etc. Peel-off paint is used as temporary corrosion protection or packaging protection for small parts, machines, spray booths, etc. Heat-resistant up to 80 Weight n/a Size 5kg, 10kg, 20kg
Hollow polyester fiber.
* Protection for people and workers who place great value on facial expressions such as children, people with hearing problems, police forces and nurses, The mask can be used also as non-sterile mask in hospitals and vaccine centres. No fogging of glasses thanks to extra soft nose pads. * Colour: Black and white * Size: Standard and children * Box: 50 pieces * Price per box: CHF 53.75 * Languages: Italian, French, German, * Brand: ST-Cleantech AG * English, and Spanish Price range: < 29 boxes -> CHF 53.75 > 200 boxes -> CHF 8.40 > 30 boxes -> CHF 52.70 > 500 boxes -> CHF 45.70 > 100 boxes -> CHF 51.10 First layer non-woven: White or Black: 50g (double S) Second layer: 25g melting spray cloth Third layer non-woven: White or Black: 25g (double S) Layer 4 PP transparent sheet: Thickness: 0.33mm +/- 0.1mm Size: 134mm x 37mm +/- 2mm Material: PP Classification /Standard: Medical device: Class I / according to DIN EN14683:2019. Duration: 2 years Material: Consisting of: non-woven fleece layer PP, filter material PP manufactured in meltblown process, PP window (13.4x3.7x0.2 cm) ultrasonically welded latex-free, nose clip, aluminium wire PE coated, ear bands made of elastane. Level of performance: Filter efficiency antibacterial : (BFE) Respiratory resistance : Resistance to pressure spray: Microbiological purity : According to type IIR (same test standard to be applied). Norm: 98% - Test result: 99.9%. (according to EN 14683:2019+AC:2019, Annex B). Standard:
Protection for people and workers who place great value on facial expressions such as children, people with hearing problems, police forces and nurses. The mask can be used also as non-sterile mask in hospitals and vaccine centres. No fogging of glasses thanks to extra soft nose pads. Colour: Black and white Size: Standard and children Box: 50 pieces Languages: Italian, French, German, English, and Spanish Brand: ST-Cleantech AG Classification / Standard: Medical device: Class I / according to DIN EN14683:2019. Material: Consisting of: non-woven fleece layer PP, filter material PP manufactured in meltblown process, PP window (13.4x3.7x0.2 cm) ultrasonically welded latex-free, nose clip, aluminium wire PE coated, ear bands made of elastane. Level of performance: According to type IIR (same test standard to be applied). Filter efficiency antibacterial (BFE): Norm: 98% - Test result: 99.9%. (according to EN 14683:2019+AC:2019, Annex B). Respiratory resistance: Standard:
