Winstrip A2 KNG 300 pasty from Winoil is a ready-to-use, pasty paint stripper that is used to remove paint and adhesives
Size
1 litre
5 litres
15 litres
The product is suitable for both indoor and outdoor use. It dissolves practically all coatings and adhesives such as oil paints, synthetic resin, nitro, dispersion and stoving varnishes, 2-component and powder coatings as well as 2-component adhesives. It can be used on most surfaces, e.g. stone, wood, metals, etc. Plastic and rubber surfaces (PE, HPE, PP, PVC and natural rubber) can also be stripped/stripped, but preliminary tests are recommended.
* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.
BACKGROUND
* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.
* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion
* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.
APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
Minimum Order Quantity 400 Square Feet
Usage Wall Tile, Flooring
Coverage area (application) Kitchen, Bathroom, Bedroom
Surface Finish Polished
Thickness 5-10 mm
As a reputed firm, we are offering an extensive range of Absolute Black Granite. Available in different variations, These garanite products are offered in different sizes and shades as per the choice of our customers. These products are hardened and quenched in state and ensure long lasting service life. Moreover, we are offering these products at affordable rates.
Specifications:
Granite Slabs (in cm):
270-300 cm Length , 160-200 cm Width
Thickness:
2/3/4 cm
Granite Tiles (in cm):
60 x 60, 60 x 40, 60 x 30, 40 x 40, 30 x 30 & Cut to size
Granite Applications:
Flooring, Counter Tops, Vanities as well as exterior applications
Pay Mode Terms: L/C (Letter of Credit),D/P,T/T (Bank Transfer),Other
Port of Dispatch: Chennai Port
Production Capacity: 900 m2 per Month
Delivery Time: 18 Days on Port
Packaging Details: Strong Seaworthy Wooden Crates
Minimum Order Quantity 400 Square Feet/Onwards
Color Black Galaxy
Thickness 20 mm
Usage/Application Countertops
Surface Finish Polished
Product Type Slab
Stone Form Big Slab
Size 8 ft x 4 ft
We are a highly acclaimed company that offers a wide range of Black Galaxy Granite . These stone occurs in a deep black tinge and are available in different sizes from small to medium. The color variation of the stone basically is dependent on the distribution of these silver flakes in the stone. The stone occurs naturally with a praiseworthy finishing. These Products are perfect for the decoration of residential areas. Specifications: Granite Slabs (in cm): 270-300 cm Length, 160-200 cm Width Thickness : 2/3/4 cm Granite Tiles (in cm): 60 x 60, 60 x 40, 60 x 30, 40 x 40, 30 x 30 & Cut to size Granite Applications: Flooring, Counter Tops, Vanities as well as exterior applications Granite Finishes: Honed, Polished, Sawn, Sandblasted
Request
Callback
Additional Information:
Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,Other
Port of Dispatch: Chennai Port
Production Capacity: 1000 Square Meter per Month
Delivery Time: 18 Days on Port
Packaging Details: Strong Seaworthy Wooden Crates
Acid Resistance bricks & Tile are special form of masonry bricks which are chemically resistant and thermally durable. These are used for masonry construction and flooring which is prone to chemical attack.
These products are classified as per the different standard.
Class - I
Class - II
Sizes of Bricks:
230 x 115 x 75 mm, 230 x 115 x 65 mm, 230 x 115 x 38 mm, 230 x 115 x 25 mm
Sizes of Tile:
230 x 115 x 20 mm / 15 mm / 12 mm
200 x 100 x 20 mm / 15 mm/ 12 mm
300 x 300 x 15 mm / 12mm
Product Details:
Usage/Application Oil Industry
Size 10-20 inch, 20-30 inch, 1-5 inch, 0-1 inch
Material Standard ANSI B16.5, ASTM A182, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
Country of Origin Made in India
FLANGE15 NB UP TO 600 NB IN 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS / TABLE 2.5 , TABLE 6 , TABLE 10, TABLE 16,TABLE 25 , TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400FORMSLIP ON , SOCKET WELD , BLIND , LAPPED , SCREWED , WELD NECK , REDUCING , SPECTACLE ,SLIP ON BOSS , PLATE , PLATE BLANK , SCREWED BOSS.
Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 )ASTM / ASME SB 160 UNS 2201 (NICKEL 201 )ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200.
Product Details:
Usage/Application Oil Industry
Size 10-20 inch, 20-30 inch, 1-5 inch, 0-1 inch
Material Standard ANSI B16.5, ASTM A182, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
Country of Origin Made in India
FLANGE15 NB UP TO 600 NB IN 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS / TABLE 2.5 , TABLE 6 , TABLE 10, TABLE 16,TABLE 25 , TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400FORMSLIP ON , SOCKET WELD , BLIND , LAPPED , SCREWED , WELD NECK , REDUCING , SPECTACLE ,SLIP ON BOSS , PLATE , PLATE BLANK , SCREWED BOSS.
Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 )ASTM / ASME SB 160 UNS 2201 (NICKEL 201 )ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200.
* I-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the I-shaped. I-section steel is divided into hot rolIed I-beam and lightweight I-beam
The characteristics of galvanized I steel:
1. Strong corrosion resistance: the thickness of hot-dip galvanized layer can reach more than 300 m;
2. Good plasticity and toughness: no deformation in cold bending;
3. High strength: it can be used as the load-bearing framework of ceiling enclosure plate.
4. Good fire resistance: high melting point (1000 C), strong fire resistance;
5. Long service life : 100 years.
6. Flexible and fast installation: short construction period.
7. The color is bright and durable, without surface decoration
Standard DIN GB JIS BA AISI ASTM EN GOST etc.
Shape : I -Beam
Materials : Galvanized steel
Size : As customer request
Packing : By bundles with steel strips or as customer request
Application : Mechanical&manufacture,Steel
structure,Shipbuilding,Bridging,Automobile chassis, etc.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Packing and shipping
* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
