Brief introduction of Glass Fused to Steel Waste Water Storage Tanks Glass Fused to Steel Waste Water Storage Tank has enjoyed increasing popularity over the past years . Glass Fused to Steel Waste Water Storage Tank is widely used in the water and wastewater treatment industry with excellent corrosion resistance for both internal and external coated with corrosion-resistant silica glass. In the wastewater treatment sector , Glass Fused to Steel Waste Water Storage Tanks can be used as aeration tanks, aerobic reactor, water purifying tanks, leachate storage, trickling filters. The tanks are constructed in full accordance with the applicable AWWA D103 Six good reasons to choose Glass Fused to Steel Waste Water Storage Tanks - Minimal maintenance costs - Colors can be customized and will not fade away with time - Tanks are bolted, it is easy to ship and dismantle - Size is expandable - Simple installation, do not need big equipment for erection, cost-effective - Over 30 years service life Our advantages . The largest and most professional manufactory in China . Tanks are up to NSF- 61 and AWWA D-103 standards . More than twenty years' experience . Already successfully built more than 2000 tanks worldwide . Excellent after -service and professional team . Time-saving and cost-effective Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Sludge Holding Glass Fused Steel Tank In Green Energy Industrial Sludge Holding Tanks provide storage and blending for the thickened waste activated sludge, primary sludge, imported sludge, and scum before further Processing. Bio-reactors provide an environment in which living organisms, including bacteria and plankton (termed activated sludge), remove pollutants from the wastewater by feeding upon the organic matter and by absorption. Glass fused steel can be used as a sludge storage tank in such applications. Other than that, the glass fused steel tank can be used as any kind of storage tank or reactor. About Us Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture, etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition.
Water storage tanks can be installed in any number of commercial or industrial application processes. We design our water storage tanks based on your needs, with the latest technological resources and using the best quality materials pursuant to international standards. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition. Glass-Fused-to-Steel tank Applications
Description of Porcelain Enamel Irrigation Water Tank Porcelain enamel irrigation water tank is made up of glass fused steel with special sealant & self-locking bolts, which are designed for optimum energy efficiency, durability, and long-lasting performance. The bolted steel construction of these irrigation water tank is exceptional for the storage of potable water, wastewater, petroleum, chemicals, and dry bulk and in such applications as reservoirs ( open top or with aluminum dome or flat panel roof ), power generation stations, standpipes, frac processing, fish ponds, sludge tanks, trickling filters, high temp fermentation plants.
What is the UASB reaction? UASB process is adaptable for much different sewage, and the structure, operation, and management are simple, the cost is low and the technology is matured. The UASB reactor is widely used in the anaerobic digester. After flowed into the UASB reactor from the bottom, the sewage upflowed through the sludge bed which is the containing much granular sludge or flocculation sludge, and the anaerobic reaction occurred when the sewage meeting with the sludge . and then the biogas generated. At the same time, the internal sewage is agitated and continues the circulation. The three-phase separator at the top reactor will help to separate the gas, the liquid and the solid. After the anaerobic reaction, 80% - 90% of organic waste was decomposed. Our bolted steel tanks with high corrosion resistance are widely used as UASB reactor. What is the process of the anaerobic digester? Anaerobic digester (AD), the first step is the decomposition of plant, animal or other matters, in this process, it breaks down the organic material by the microorganisms in the absence of oxygen. http://www.cectank.com/biogas-storage-tanks/ http://www.cectank.com/glass-fused-to-steel-tanks/ http://www.cectank.com/bolted-steel-tanks/ http://www.cectank.com/irrigation-water-tanks/ http://www.cectank.com/potable-water-tanks/ http://www.cectank.com/industrial-wastewater-storage-tanks/ http://www.cectank.com/sludge-digester-tank-and-sludge-storage-tank/ http://www.cectank.com/leachate-tanks/ http://www.cectank.com/dry-bulk-storage-tank/ http://www.cectank.com/agricultural-water-tanks/ http://www.cectank.com/anaerobic-digesters-and-biogas-tanks/ http://www.cectank.com/drinking-water-storage-tanks/ http://www.cectank.com/fire-protection-water-storage-tanks/ http://www.cectank.com/fire-sprinkler-water-storage-tanks/ http://www.cectank.com/liquid-storage-tanks/ http://www.cectank.com/municipal-water-tanks/ http://www.cectank.com/industrial-water-tanks/ http://www.cectank.com/process-water-tanks/
Bolted Steel Tank Introduction We specialized in bolted steel tank design, manufacture, and installation, we are the first bolted steel tanks manufacturer in China. Our bolted steel tank is widely used as a UASB reactor in municipal sewage treatment project.UASB reactor refers to a special kind of reactor concept for the " high rate " anaerobic treatment of wastewater. In the 1970s it was developed by the Dutch scholars. It is suitable for many different kinds of sewage The structure and management are simple, actually an extremely simple and inexpensive design, so that it is then widespread. How the UASB Reactor Works? Wastewater is distributed into the tank at appropriately spaced inlets from the bottom. And then passes upwards through an anaerobic sludge bed where the microorganisms in the sludge come into contact with wastewater-substrates. The anaerobic degradation process starts and gas will be generated The upward motion of released gas bubbles causes hydraulic turbulence that provides reactor mixing without any mechanical parts. At the top of the reactor, the water phase is separated from sludge solids and gas in a three-phase separator (also known as the gas-liquid solids separator). The three-phase-separator is commonly a gas cap with a settler situated above it. After the anaerobic reaction, 80%~90% of organic waste will be decomposed What are Glass-Fused-to-Steel Tanks? After firing at 820°C-930°C high temperature, the molten glass reacts with the steel plate surface to form an inert and inorganic bond, which combines the strength and flexibility of steel and outstanding corrosion resistance of glass, so Glass-Fused-to-Steel tanks can provide many advantages over standard epoxy or weld painted storage tanks. Glass-Fused-to-Steel technology is the premium coating technology in the storage tanks market, and Glass-Fused-to-Steel tanks are widely used in bio-energy, municipal sewage, landfill leachate, and industrial wastewater treatment, etc. applications Why Us? Center Enamel Co., Ltd is not only the first bolted steel tank manufacturer and supplier in China but also the most experienced bolted steel tank manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC bolted steel tank are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel bolted steel tank have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Bolted Steel Tank Introduction We specialized in bolted steel tank design, manufacture, and installation, we are the first bolted steel tanks manufacturer in China. Our bolted steel tank is widely used as a UASB reactor in municipal sewage treatment project.UASB reactor refers to a special kind of reactor concept for the " high rate " anaerobic treatment of wastewater. In the 1970s it was developed by the Dutch scholars. It is suitable for many different kinds of sewage The structure and management are simple, actually an extremely simple and inexpensive design, so that it is then widespread. How the UASB Reactor Works? Wastewater is distributed into the tank at appropriately spaced inlets from the bottom. And then passes upwards through an anaerobic sludge bed where the microorganisms in the sludge come into contact with wastewater-substrates. The anaerobic degradation process starts and gas will be generated The upward motion of released gas bubbles causes hydraulic turbulence that provides reactor mixing without any mechanical parts. At the top of the reactor, the water phase is separated from sludge solids and gas in a three-phase separator (also known as the gas-liquid solids separator). The three-phase-separator is commonly a gas cap with a settler situated above it. After the anaerobic reaction, 80%~90% of organic waste will be decomposed What are Glass-Fused-to-Steel Tanks? After firing at 820°C-930°C high temperature, the molten glass reacts with the steel plate surface to form an inert and inorganic bond, which combines the strength and flexibility of steel and outstanding corrosion resistance of glass, so Glass-Fused-to-Steel tanks can provide many advantages over standard epoxy or weld painted storage tanks. Glass-Fused-to-Steel technology is the premium coating technology in the storage tanks market, and Glass-Fused-to-Steel tanks are widely used in bio-energy, municipal sewage, landfill leachate, and industrial wastewater treatment, etc. applications Why Us? Center Enamel Co., Ltd is not only the first bolted steel tank manufacturer and supplier in China but also the most experienced bolted steel tank manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC bolted steel tank are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel bolted steel tank have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
As the first biogas storage tanks manufacturer in China, Center Enamel has more than 30 years experiences in biogas tanks design, manufacture and installation. All the biogas tanks are made of high corrosion resistance Glass-Fused-to-Steel, actually, we also call it Glass-Fused-to-Steel tank. We can also customize these biogas tanks in a variety of colors to meet local planning recommendations and restrictions. As we all know, almost any organic waste can be digested, including food processing waste, domestic waste, restaurant waste, municipal sludge effluent and farm waste. Anaerobic digestion systems can convert organic waste to clean, renewable energy. In every biogas project, we can use Glass-Fused-to-Steel tank to biogas storage tank and anaerobic digestion tank. With the high corrosion resistance, these biogas storage tanks and anaerobic digestion tanks will have long term security, reducing operation and maintenance costs. Modular bolted construction gives rapid and cost-effective site installation and the ability to remodel or relocate the structure gives asset value to the biogas storage tank and anaerobic digestion tank. Our biogas tanks are assembled quickly without specialized labor or heavy equipment. This fact alone often makes our Glass-Fused-to-Steel tank the most economical tank choice. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system is in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API, and NFPA, etc. international standards.
As the first bolted steel tanks manufacturer in China, Center Enamel has designed, manufactured and installed bolted steel potable water tanks for more than 30 years. we can supply you with a new bolted steel tank suitable for corrosive and non-corrosive liquids and chemicals, ranging in capacity from 500 Gallons to 4,000,000 Gallons. All our bolted steel potable water tanks are ready for sale. When constructing bolted steel potable water tanks, the selection of the best material is an important quality factor. Bolted Glass Fused to Steel potable water tank is the only tank finish where two materials are fused together to achieve the best of both: the strength and flexibility of the steel combined with corrosion resistance of the glass, which are ideal if you need to store municipal/industrial waste water and sludge or certain processing, intermediate and end products from the chemical, pharmaceutical and food processing industries. Bolted tanks are made from individual sections that are manufactured and finished offsite, greatly reducing the time and labor involved in the field. Once delivered, each section is erected, sealed with gaskets and bolted to adjacent sections. This results in an installation process that is quick and easy, far faster than installation of concrete or welded tanks.The installation time for bolted tanks depends on the sizes of the tanks installed, and the complexity of the installation process. Normally, the installation is very quick, often requiring less than a third of the time it typically takes to complete a welded or a concrete tank. Center Enamel is the leader in bolted steel potable water tank in China, Glass Fused to Steel tanks and Bolted steel tanks. We offer the most complete array of tanks for storing potable water for Commercial, Industrial, and Residential applications. Whether you're looking to potable water storage tank , our bolted steel tank is the perfect choice for your potable water storage project. Center Enamel can make even the most complicated tank projects go smoothly. Send your requirement, our bolted steel potable water tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. When it comes to potable water Storage, make it Center Enamel. rted. More info in http://www.cectank.com/potable-water-tanks/
As the first bolted steel tanks manufacturer in China, Center Enamel has designed, manufactured and installed bolted steel potable water tanks for more than 30 years. we can supply you with a new bolted steel tank suitable for corrosive and non-corrosive liquids and chemicals, ranging in capacity from 500 Gallons to 4,000,000 Gallons. All our bolted steel potable water tanks are ready for sale. When constructing bolted steel potable water tanks, the selection of the best material is an important quality factor. Bolted Glass Fused to Steel potable water tank is the only tank finish where two materials are fused together to achieve the best of both: the strength and flexibility of the steel combined with corrosion resistance of the glass, which are ideal if you need to store municipal/industrial waste water and sludge or certain processing, intermediate and end products from the chemical, pharmaceutical and food processing industries. Bolted tanks are made from individual sections that are manufactured and finished offsite, greatly reducing the time and labor involved in the field. Once delivered, each section is erected, sealed with gaskets and bolted to adjacent sections. This results in an installation process that is quick and easy, far faster than installation of concrete or welded tanks.The installation time for bolted tanks depends on the sizes of the tanks installed, and the complexity of the installation process. Normally, the installation is very quick, often requiring less than a third of the time it typically takes to complete a welded or a concrete tank. Center Enamel is the leader in bolted steel potable water tank in China, Glass Fused to Steel tanks and Bolted steel tanks. We offer the most complete array of tanks for storing potable water for Commercial, Industrial, and Residential applications. Whether you're looking to potable water storage tank , our bolted steel tank is the perfect choice for your potable water storage project. Center Enamel can make even the most complicated tank projects go smoothly. Send your requirement, our bolted steel potable water tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. When it comes to potable water Storage, make it Center Enamel. rted. More info in http://www.cectank.com/potable-water-tanks/
Center Enamel supply a range of Glass-Fused-to-Steel fire protection water storage tanks suitable for use in automatic sprinkler systems and fire hydrant systems. We design, manufacture and installation these fire tanks for over 30 years, we are the first Glass-Fused-to-Steel tanks manufacturer in China. With compliance to NSF61,Center Enamel s standard range of water storage tanks for fire protection are available in 20 steres to 20,000 steres and meets international water tank design standards. Glass-Fused-to-Steel tanks are made from individual sections that have been manufactured and finished in a controlled factory setting. This allows each section to be formed according to strict structural specifications, with quality bends, welds and surface preparations that are monitored with compre hensive quality control measures. Once the sections are complete, they are powder-coated in a tightly-controlled environment, which results in a durable finish that virtually eliminates corrosion and maintenance issues; unlike field-welded tanks, which must be finished at the installation site, often resulting in an imperfect and inconsistent finished coating that is susceptible to corrosion and other damage. Glass-Fused-to-Steel tanks are created with superior materials that meet AWWA, NFPA, and FM Global standards, resulting in a long-lasting, durable product. They offer lifespans that are similar to, or longer than, concrete or welded tanks. Unlike competing products, they can easily be repaired by unbolting the damaged section, replacing it and installing new gaskets and fasteners. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. CEC Glass-Fused-to-Steel tanks are wildly used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
A fire-protection water storage tank can make all the difference when a fire breaks out. Water is the most common extinguishing agent for combating fires. Water is so fundamental to firefighting that a good water supply is one of the most important factors in municipal fire protection. Fire protection water storage tanks are not just for residential properties and have been developed to the point where they are now a common sight at many commercial and industrial construction sites, including airfields, airports, schools, universities, hospitals, prisons, police stations, office buildings, data centers, and other facilities that need a reliable or redundant water supply. Having these tanks on commercial properties takes away the worry of having a shortage of water should a fire occur. In many cases, fire protection water storage tanks provide the water necessary for fire suppression purposes inside the building. Center Enamel offers fire protection water storage tanks from 20 to 18000 steres. All of our fire water tanks are certified by NSF61. This standard provides requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection. Center Enamel is a China manufacturing company located in Shijiazhuang, Hebei province. Our product categories range from fire water tanks, Glass-Fused-to-Steel tank, wastewater tank, biogas tank, anaerobic digesters, dry bulk storage tanks, and other storage solutions. Benefits of Center Enamel Fire Water Storage Tank? Short construction period, cost-effective tank solution Superior corrosion resistance, service life is more than 30 years Easy to install, no need for big installation equipment and/or very skilled labors Tank volume can be easily expanded It can be dismantled, removed and relocated Elegant appearance, tank color can be customized
For healthy and easy installation stainless steel warehouses Tanks are guaranteed high quality and are produced in Turkey
Selection of an appropriate biogas storage tank makes a significant contribution to the efficiency and safety for each biogas project. Glass-Fused-to-Steel tank with high airtightness is the best option for the biogas storage tank, which has been tested and proven over the decades. Now Glass-Fused-to-Steel tank is an integral feature in the design of any modern biogas project worldwide. Anaerobic digestion is an efficient, cost-effective way of converting biomass to energy, which also provides a sustainable solution for the disposal of animal byproducts. In biogas processing project, manure, wastewater solids, agricultural residues and food scraps are delivered to an anaerobic digester tank. The anaerobic digestion process uses microbes to break down the organic material through a fermentation process under controlled conditions, resulting in clean biogas and digested material. That digested material is then used to make fertilizer, compost, soil amendments or animal bedding. The raw biogas is further processed and water, carbon dioxide and other trace compounds are removed, and then the leaving methane and other trace gasses can be stored in the biogas storage tank. The processed biogas is then distributed and used for producing electricity, heat and fuel, or injected into natural gas pipelines. Biogas provides a clean, repeatable source for energy and fuel, while also making use of organic materials that might otherwise end up in a landfill. What is Glass-Fused-t0-Steel Tank? Glass-Fused-To-Steel Tank is made of Glass-Fused-To-Steel, special sealant, self-locking bolt, which provides the best possible combination of the strength and flexibility of steel and the inertness of glass. Glass-Fused-To-Steel also was known as glass-lined steel or Enamelled steel, is the result of coating the steel with glass infusion at high temperature (850°C). All the Glass-Fused-To-Steel are passed the 1500V holiday test before delivered to our customer, which can make sure that Glass-Fused-To-Steel is in best quality condition with high airtightness.
The material and design of the tank are commonly determined by the size and location of the industrial wastewater treatment project. Typically, concrete tanks are larger in size due to the high cost to set up. This high cost makes smaller tanks cost prohibitive relative to other designs, which require considerably less equipment on site. Steel tanks for industrial wastewater treatment project are commonly either bolted or welded design. Especially for the factory or plant located in the city, which doesnt allow the storage tank to take too much place. Bolted steel tanks range in size from 5,000 to 3,500,000 gallons compared to welded steel tanks, which can be extremely large. Bolted steel tank also known as Glass-Fused-To-Steel Tank, is made of Glass-Fused-To-Steel, special sealant, self-locking bolt, which provides the best possible combination of the strength and flexibility of steel and the inertness of glass. Glass-Fused-To-Steel also known as glass-lined steel or Enamelled steel, is the result of coating the steel with glass infusion at high temperature (850°C). Comparing with concrete tanks and welded steel tanks, bolted steel tanks have proven to be a cost-effective solution for industrial wastewater treatment project. Bolted steel tanks are prefabricated in the factory and all the materials arrive at the job site ready to install, therefore the amount of manual labor on site is significantly reduced. As extensive and expensive site work required is very minimal, the tank cost is decreased, making bolted steel tanks more affordable compared to other tanks of the same size range. For most mid-sized projects, storage tanks for industrial wastewater treatment project range in capacity from 25,000 to 250,000 gallons, which is well-suited for a bolted steel tank. As welding, grinding and other hot work is not required to erect a bolted steel tank, the risk of fire is dramatically reduced. In addition, bolted steel tanks are prefinished in the factory, therefore sandblasting and painting in the field are eliminated and negative environmental impact is significantly reduced.
Fire protection water storage tanks can be used in commercial, industrial, residential or rural areas for fire protection. In emergency fire situations, the demand for water may exceed the supply of household water pipes, especially in suburban or rural areas where well water supplies are limited. Therefore, it is very necessary to set up fire protection water storage tanks in commercial, industrial, residential or rural areas. The use of fire water storage tanks can greatly improve emergency fire protection work, and may even be used by hotels, commercial office buildings as automatic fire sprinkler systems for on-site water supply. Center Enamel Glass-Fused-to-Steel tank is the best choice for fire protection water storage tank. As the most professional Glass-Fused-to-Steel tanks manufacturer in Asia, we have many successful fire protection water storage projects in the world. All the Fire protection water storage Tanks are conformed to the American Water Works Association (AWWA) D103-09 and OSHA, also certified by NSF61. Compliance with both drinking / potable water storage standards and fire water protection standards allows the same Glass-Fused-to-Steel tank for both applications, as well as creating a dual use. In addition, we can customize the fire water storage solutions according to the requirements of customers and local conditions. High-quality design, meeting a wide range of international standards, constructed from corrosion resistant materials. Fire protection water storage tanks also can be designed to meet earthquake and wind conditions. Advantages of Fire Water Tanks 1. Short Construction Period: compare to over 90 days of construction time of concrete tank, it takes even less than 15 days for installation of GFS Fire Water Tank. 2. Beautiful Appearance: the color of glass fused to steel tank could be customized as the clients request based on Pantone Matching System. 3. Long Service Life: the Center Enamel GFS Tanks are designed to work in long service life as more than 30 years. 4. Tank Volume can be easily expanded: GFS Fire Water Tanks are not only easy to constructï¼? but also convenient to expand, remove and rebuild.
The material and design of the tank are commonly determined by the size and location of the industrial wastewater treatment project. Typically, concrete tanks are larger in size due to the high cost to set up. This high cost makes smaller tanks cost prohibitive relative to other designs, which require considerably less equipment on site. Steel tanks for industrial wastewater treatment project are commonly either bolted or welded design. Especially for the factory or plant located in the city, which doesnt allow the storage tank to take too much place. Bolted steel tanks range in size from 5,000 to 3,500,000 gallons compared to welded steel tanks, which can be extremely large. Bolted steel tank also known as Glass-Fused-To-Steel Tank, is made of Glass-Fused-To-Steel, special sealant, self-locking bolt, which provides the best possible combination of the strength and flexibility of steel and the inertness of glass. Glass-Fused-To-Steel also known as glass-lined steel or Enamelled steel, is the result of coating the steel with glass infusion at high temperature (850°C). Comparing with concrete tanks and welded steel tanks, bolted steel tanks have proven to be a cost-effective solution for industrial wastewater treatment project. Bolted steel tanks are prefabricated in the factory and all the materials arrive at the job site ready to install, therefore the amount of manual labor on site is significantly reduced. As extensive and expensive site work required is very minimal, the tank cost is decreased, making bolted steel tanks more affordable compared to other tanks of the same size range. For most mid-sized projects, storage tanks for industrial wastewater treatment project range in capacity from 25,000 to 250,000 gallons, which is well-suited for a bolted steel tank. As welding, grinding and other hot work is not required to erect a bolted steel tank, the risk of fire is dramatically reduced. In addition, bolted steel tanks are prefinished in the factory, therefore sandblasting and painting in the field are eliminated and negative environmental impact is significantly reduced.
a. Process Vessels b. Process Tanks c. Process Columns Product Description : Based on Client Requirements Price of product ( USD price or FOB price) : As per Product data Product origin : India Key Specifications/Special Features : Based on Client Data / Specifications Minimum Order Size and Packaging details : As per Client requirements and type of equipment
Biogas storage tank is also called biogas holder and is a kind of Anaerobic digestion tanks which are often cone shaped and supported at the centre with a single pole. The outer layer of membrane roof works as the protection for the inner membrane . The outer membrane is more strong and coated with UV resistance coating . Outer membrane can be against static electricity, ultraviolet radiation and aging. Inner coat can be against biogas leakage. Why use Glass-Fused-To-Steel Tank for biogas storage tank ? 1. Advanced technology and innovative edge protection ensure Center Enamel Glass-Fused-to-Steel Tanks are the exceptional solution in most harshest storage environment. 2. Center Enamel Glass-Fused-to-Steel tanks with superior corrosion resistance can be utilized in both the liquid and gaseous zone, and maximizing the service life of tank structure. 3. Customized colors make the tank harmonized with the surrounding environment. 4. Long service life glass coating requiring minimal maintenance, reducing the risk & loss of project shutdown during operation. 5. Modular bolted constructure give shorter installation period with simple installation tools. 6. Tank can be dismantled and rebuilt, gives continuous asset value to the product. Except for biogas storage tank , Center Enamel Glass-Fused-to-Steel tanks can also be used as various anaerobic digester , various aerobic reactor , such as SBR , CSTR , USR , EGSB , UASB , etc
Fire protection water storage tanks can be used in commercial, industrial, residential or rural areas for fire protection. In emergency fire situations, the demand for water may exceed the supply of household water pipes, especially in suburban or rural areas where well water supplies are limited. Therefore, it is very necessary to set up fire protection water storage tanks in commercial, industrial, residential or rural areas. The use of fire water storage tanks can greatly improve emergency fire protection work, and may even be used by hotels, commercial office buildings as automatic fire sprinkler systems for on-site water supply. Center Enamel Glass-Fused-to-Steel tank is the best choice for fire protection water storage tank. As the most professional Glass-Fused-to-Steel tanks manufacturer in Asia, we have many successful fire protection water storage projects in the world. All the Fire protection water storage Tanks are conformed to the American Water Works Association (AWWA) D103-09 and OSHA, also certified by NSF61. Compliance with both drinking / potable water storage standards and fire water protection standards allows the same Glass-Fused-to-Steel tank for both applications, as well as creating a dual use. In addition, we can customize the fire water storage solutions according to the requirements of customers and local conditions. High-quality design, meeting a wide range of international standards, constructed from corrosion resistant materials. Fire protection water storage tanks also can be designed to meet earthquake and wind conditions. Advantages of Fire Water Tanks 1. Short Construction Period: compare to over 90 days of construction time of concrete tank, it takes even less than 15 days for installation of GFS Fire Water Tank. 2. Beautiful Appearance: the color of glass fused to steel tank could be customized as the clients request based on Pantone Matching System. 3. Long Service Life: the Center Enamel GFS Tanks are designed to work in long service life as more than 30 years. 4. Tank Volume can be easily expanded: GFS Fire Water Tanks are not only easy to constructï¼? but also convenient to expand, remove and rebuild.
