Impact crusher Diameter and length of the rotator(mm):1000x700 Feed opening(mm):400x730 Max. Feed size(mm):300 Capacity(t/h):35-50 Power consumption(kw):37-55 Weight(kg): 9500
Jaw crusher Feed opening: 150 x 250 mm Max. Feed size: 125 mm Capacity: 0.6-3 t/h Power consumption: 5.5kw Discharge opening: 10-40 mm Overall dimension (l x w x h): 758528140mm Weight: 0.81 t
This machine boasts its ability to work at the highest efficiency while with the lowest energy consumption. Suspension structure is adopted in the tgq-160 stone cutting machine. The main working part can move up-and-down with the help of lead-screw. The cutting of blocks is realized with the blades move down slowly and the trolley moves right and left regularly, both of which are powered by electric motor. And the novel design of upper trolley well solves the problem of slicing. The spindle, as a crucial part, also has been specially processed to improve its stiffness. The feeding and retrieving of blades and the movement of trolley are centrally controlled by the control panel with high level of automation and the slabs that they produce are plane on the surface. Seaworthy packing
The KLD series features cutting with the block on the ground to increase cutting stability and decrease maintenance cost. The KLD series has a long span of ranging from 6500mm to 8500mm (please refer to the technical data below for further information), which makes them good for cutting dimensional stones. For the up-and-down mechanism, the KLD-200 adopts hydraulic system to realize the cutter's low-speed feeding in cutting and relatively high-speed rising in retrieving while the KLD-250 and KLD-300 both adopt double lead-screws to undertake the headstock's weight for their large scale. The KLD series are accurate in cutting, flexible in operation, easy for installation and maintenance and with a high productivity. They are not only widely used in China's stone processing factories, but also exported to many countries in the world. They are your perfect choice for the cutting of granite and marble blocks. Seaworthy Packing
Cutting blades marble 3 cartoons boxes
Concrete saw Engine/h.PHonda/20 H.P20 FuelGasoline Starting deviceAutomatic key Weight/height/length156 kg/1, 070 mm/1, 200 mm Width630 mm 156 kg
Single-stage fine crusher The material about 1m3 can be crushed into the granularity of 5-8mm finished product. Application: The dpx series single-stage fine crusher is developed based on the single-stage (counter-attack) hammer crusher to crush raw materials for industry such as limestone, gypsum, raw coal and so on and further to simplify the work flow of smashing. The product granularity is small (80%
Operating principle PE jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening Jaw Crusher Features 1. simple structure, easy maintenance 2. stable performance 3. even final particles and high crushing ratio
Tigers eye is a fibrous opaque quarts and is derived from altered forms of crocidolite. We are mining it.
This machine is for cutting slabs. Microcomputer controlled. Cutting dimensions set by terminal input. The machine is equipped with a laser illumination system which makes the disc adjustment easier . The cut and return is controlled by a finely adjustable inverter. The control is at the top as far as its reliability and its performances are concerned. There are type 400 and 600,fixed blade and tilting blade in choice Max.working dimensions(LxWxH) Mm3200x3200x80 Max.diameter of bladeMm400 Table dimensions(LxW)Mm3200x2000 Table tilting degreeNo0-85 Table rotating degereeNo90 Main motor power Kw15 Water consumption M3/h4 Overall dimensions(LxWxH)mm 6000x5000x2800
The crusher of this series is suitable for crushing various of mid-hard and above mid-hard ores and rocks. Crushing chamber type depends on the kind of product. The standard type (PYB) is applied to medium crushing, the medium type (PYZ) is applied to medium or fine crushing and the shorthead type (PYD) is applied to fine crushing. Features: Reliable structure High productivity Easy adjustment Economical
Scm series s super thin mill This SCM series S super thin mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, lime stone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone, so many stones or you can call them rocks. Features and Benefits * High efficiency In same condition of finished particle size and power of motor, the output is 40% higher than airflow mill and whisk mill. * High using rate of the quick-wear part In same condition of material and finished particle size, the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher. It can be generally one year. * High safety Because there are no axle tree and bolt in the grinding antrum, there will be no wearout of bearing and sealingpart, also no loose of bolts. * Environmental protection It will lighten pollution and noise by using dust cleaner and muffler, which achieves environmental protection requirement. Structural Characteristic The whole system of the SCM series S super thin mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler. Model: SCM6015 Roller number: 15 Diameter (mm): ¬ª600 Ring number: 2 Main unit speed (mm): 235 Max. Feeding size (mm): 10 Final size (mesh): 325-2500 Capacity (kg/h): 350-2500 Overall dimension (m): 10x2x5.5 Model: SCM8021 Roller number: 21 Diameter (mm): ¬ª800 Ring number: 2 Main unit speed (mm): 235 Max. Feeding size (mm): 10 Final size (mesh): 325-2500 Capacity (kg/h): 600-4000 Overall dimension (m): 12.4x2.x5.8 Model: SCM1027 Roller number: 27 Diameter (mm): ¬ª1000 Ring number: 2 Main unit speed (mm): 235 Max. Feeding size (mm): 10 Final size (mesh): 325-2500 Capacity (kg/h): 900-6000 Overall dimension (m): 14.5x3.8x6.3 Note: This specification is just reference, any changes are subject to the products. 5. SCM series S super thin mill Technological advantages: SBM VSI crusher incorporates three crushing styles; its feeding style incoporates material on material, materials on iron and falling at sides. Customers can adjust the machines according to their own demand. SBM VSI crusher realizes multiple functions in one machine, which is a big breakthrough in sand making field. Excellent performance and long service time: 1.special light oil lubracation systems ensures the temperature to be within 25f¦ 2.brand new automatic protection device provides the machine with vibrating, oil filtering and warning system; 3.new type oil filting system ensures the bearings and other transmission system are not abraded and peolong their service time; 4.choice wearble materials prolong the service time of the machine by 40%. So the cost is lowerd by more than 40%. Model: VSI7611 ; VSI8518; VSI9526; VSI1140 Model:VSI 7611 Capacity (t/h): Feed both at center and at sides:120-180; Feed at center:60-90 Max feed size (mm): soft material ·+35; hard material·+30 Rotation speed (r/min): 1700-1890 Power (kw) : 110-150 Overall dimension L*W*H (mm) : 3700*2150*2100 Weight (t) : 7.8 Model: VSI8518 Capacity (t/h): Feed both at center and at sides: 200-260; Feed at center: 100-130 Max feed size (mm): soft material·+40 ; hard material·+35 Rotation speed (r/min): 1520-1690 Power (kw) : 180-220 Overall dimension L*W*H (mm) : 4140*2280*2425 Weight (t) : 10.3 Model: 9526 Capacity (t/h): Feed both at center and at sides: 300-380; Feed at center:150-190 Max feed size (mm): soft material·+45 hard material·+40 Rotation speed (r/min): 1360-1510 Power (kw) : 264-320 Overall dimension L*W*H (mm) : 4560*2447*2778 Weight (t) :16 Model:VSI1140 Capacity (t/h): Feed both at center and at sides:450-520 ; Feed at center: 225-260 Max feed size (mm): soft material·+50 hard material·+45 Rotation speed (r/min): 1180-1310 Power (kw) : 400-440 Overall dimension L*W*H (mm) : 5000*2700*3300 Weight (t) :25.6
Our jaw crusher is ideally suitable for primary and secondary crushing with low power consumption and easy maintenance. Every feature of jaw crusher has been carefully designed to provide superior quality and performance. The size of our jaw crusher is designated by the rectangular or square opening at the top of the jaws (feed opening). For instance, a 24 x 36 jaw crusher has a opening of 24" by 36", a 56 x 56 jaw crusher has a opening of 56" square. Primary jaw crushers are typically of the square opening design, and secondary jaw crushers are of the rectangular opening design. Our jaw crusher is widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc.Our jaw crusher is recommended by leading consultants in this field and is used by hundreds of customers all over the world. Our jaw crusher has the features below: 1.Our jaw crusherí»s structure is simple and our jaw crusher is easy to maintain. 2.Our jaw crusher is suitable for crushing maximum, medium and minimum stones. 3.The operating principle of our jaw crusher is easy to be operated. 4.Our jaw crusher is of various types. Models:pe 150*250 ~pe 900*1200 The smallest model: Model: pe150*250 Size of feeder opening(mm): 150*250 Max feeding size(mm): 125 Capacity(t/h): 1-3 Motor power(kw): 5.5 Over all dimensions (mm): 896*745*935 Weight(t): 0.8 The biggest model: Model: pe900*1200 Size of feeder opening(mm): 900*1200 Max feeding size(mm): 750 Capacity(t/h): 140-260 Motor power(kw): 110 Over all dimensions (mm): 3789*2826*3025 Weight(t): 52 Container, nude pack or in bulk
Jaw crusher The zenith jaw crusher are ideally suitable for primary and secondary crushing, with low power consumption and easy maintenance. Every feature of these crushers has been carefully designed to provide superior quality and performance. The jaw crushers are widely used for crushing various materials like stone, granite, trap rock, coke, coal, manganese ore, iron ore, emery, fused aluminum, oxide, fused calcium carbide, lime stone, quartzite, alloys, etc. These crushers are recommended by leading consultants in this field and are used by hundreds of customers all over the world. Features: The stone crusher is of various types. The crusher is suitable for crushing maximum, medium and minimum stones. The operating principle is easy to be operated. The structure is simple and it is easy to maintain. 150x250, 250x400, 600x900, 250x1000, 250x1200
Impact crusher The zenith impact crusher can crush granite, basalt, bluestone, etc. The diameters of impact crusher are from 100mm to 500mm, and its crushing compression strength is not more than 320mp. It own big reduction ratio, high crushing efficiency, and convenient maintenance. The final product is desirable. The rock machine is used in highway and railway surface and water and electricity industry. The main features 1.Final product with cubical shape. 2.The blow bar with high chrome. 3.Easy maintenance. Hydraulic or hand opening. 4.Reliable operation. Impact plate with a special shape. Pf-0807, pf-1010, pf-1214, pf-1315
Jaw crusher Very feature of these machines has been carefully designed to provide superior quality and performance. They are widely used for crushing various materials like stones, granites, traprocks, cokes, coals, manganese ores, iron ores, emeries, fused aluminums, oxides, fused calcium carbides, lime stones, quartzite and alloys.
Impact crusher This impact crusher produces a high ratio of reduction. The impact crusher is built for rug durability and simplicity of operation. Adjustment is easy from the exterior of the crusher. Maintenance is simple through inspection doors, and electric power unit is standard. Dongmeng impact crushers offer greater reliability, high production and are ideal for portable mounting.
The material about 1m3 can be crushed into the granularity of 5-8mm finished product. Application: The DPX series single-stage fine crusher is developed based on the single-stage (counter-attack) hammer crusher to crush raw materials for industry such as limestone, gypsum, raw coal and so on and further to simplify the work flow of smashing. The product granularity is small (80%
Application·ª The crusher can be used to crush ores and rocks whose grain size is smaller than 340mm. It can be widely used in small and medium mine, building material, highway engineering, silicate and chemical industry. It can crush the materials whose compressive strength is less than 320MPa. Features: Large crushing ratio; Even granularity; Simple structure; Reliable operation; Easy maintenance; Low expense. Application of GFP and GXPE·ª The crusher can be used to crush ores and rocks whose grain size is smaller than 340mm. It can be widely used in small and medium mine, building material, highway engineering, silicate and chemical industries. It can crush the materials whose compression strength is less than 320MPa. Features: Large crushing ratio; Even granularity; Simple structure; Reliable operation; Easy maintenance; Low expense. Specifications: Type and spec. The max. feeding granularity(mm) Capacity (t/h) Prejudicial axis rotate speed(r/m) Discharging granularity(mm) Electric motorf+s power(KW) PE900f-1200 750 180 170 95f+165 110 PE750f-1060 630 51f+208 250 80f+140 110 PE600f-900 500 60f+150 300 70f+200 75 PEF500f-750 425 35f+80 275 50f+100 55 PE400f-600 350 20f+60 275 40f+100 30 PE250f-400 210 5f+20 300 20f+80 15 PEX150f-750 120 8f+35 320 10f+40 15 PEX250f-1000 210 15f+50 330 15f+50 37 PEX2500f-1200 210 40f+85 300 20f+50 60 GFP400f-600 350 25f+45 / 25f+80 30 GFP250f-400 225 7f+14 / 12f+30 15 GXPE250f-400 255 11f+20 / 8f+25 15-17 GXPE250f-1000 255 15f+35 / 8f+20 30-37
Stone crusher hammer
