Offer:Corten A ,Corten B,Corten A Weather Resistant Steel plate, Corten B Weather Resistant Steel Sheet Steel Grade: Corten A Weather Resistant Steel plate,Corten B Weather Resistant Steel Sheet,A588 Grade A,A588 Grade B,A588 Grade C,A588 Grade K Main Application: Corten A ,Corten B Weather Resistant Steel Plate is used in Vehicle, Bridge, Tower, Container and so on. Steel Standard: CORTEN, Rolling Size: Thickness*Width*Length 4-150mm*1220-4200mm*5000-18000mm Notes: 1.Payment Item: T/T,L/C 2.Trade Terms:CIF,FOB,CFR,CNF 3.Delivery Time: 10-30days 4.Heat Treatment: AR,TMCP,N,Q+T, 5:Steel Services: UT ,Charpy V-Notch Impact Test,HIC test, NDT , PWHT,NACE0175 ,The Third Party Test (Such as SGS Test),Coated or Shot Blasting and Painting,Z Direction Test.
Offer:09CuPCrNi-A|09CuPCrNi-B| Weather Resistant Steel Plate Steel Name: 09CuPCrNi-A |09CuPCrNi-B |Steel Sheet|Weather Resistant Steel plate Main Application: TB/T 1979 09CuPCrNi-A |09CuPCrNi-B Weather Resistant Steel Plate is used in Vehicle, Bridge, Tower, Container And So On. Steel Standard: TB/T 1979 Rolling Size: Thickness*Width*Length 4-150mm*1220-4200mm*5000-18000mm Notes: 1.Payment Item: T/T,L/C 2.Trade Terms:CIF,FOB,CFR,CNF 3.Delivery Time: 10-30days 4.Heat Treatment: AR,TMCP,N,Q+T, 5:Steel Services: UT ,Charpy V-Notch Impact Test,HIC test, NDT , PWHT,NACE0175 ,The Third Party Test (Such as SGS Test),Coated or Shot Blasting and Painting,Z Direction Test.
Offer:NM300,NM360,NM400,NM450,NM500,NM550,Abrasion Resistant Steel Sheet Steel Name: NM300,NM360,NM400,NM450,NM500,NM550,Abrasion Resistant Steel Sheets Main Application: NM300,NM360,NM400,NM450,NM500,NM550,Abrasion Resistant Steel Plate Is Widely Used Inloaders Bulldozers, Digging Bucket Plate, Side Blade Plate, Bucket Bottom, Razor Blades,Rotating Drill Pipe And So On. Steel Standard: GB/T 24186 Rolling Size: Thickness*Width*Length 5-80mm*1220-4200mm*5000-18000mm Notes: 1.Payment Item: T/T,L/C 2.Trade Terms:CIF,FOB,CFR,CNF 3.Delivery Time: 10-30days 4.Heat Treatment:AR,TMCP,N,Q+T, 5:Steel Services:UT,Charpy V-Notch Impact Test,HIC test, NDT , PWHT,NACE0175 ,The Third Party Test (Such as SGS Test),Coated or Shot Blasting and Painting,Z Direction Test.
Classification of steel fiber The advent of steel fiber is not long, but more and more widely used in the field, with this corresponding, steel fiber varieties are also increasing. According to the shape of the division: Flat steel fiber, pressure prismatic steel fiber, waveform steel fiber, bending hook shaped steel fiber, big head shaped steel fiber, double pointed steel fiber, cluster of steel fiber and so on. 2 according to the section shape: Round, rectangular, groove type, irregular 3 according to the production process: Cut off the steel fiber (cut off with a fine steel wire); Shear steel fiber (with a thin steel sheet, strip shear); Milling steel fiber (steel or steel ingot cutting); Molten steel fiber (molten steel pumping). The most promising is the dissolution of steel fiber, the lowest price 4 according to the material is divided into: Plain carbon fiber (tensile strength is generally in 300~2500mpa); Stainless steel fiber (according to the material 304310330430446, etc.); Other metal fibers (aluminum, copper, titanium and alloy). According to the state of surface coating: No coating, surface coating of epoxy resin, zinc, etc.. The industrial use of a large number of ordinary steel fiber without coating.
Steel shot 1. Production specification: s780, s660, s550, s460, s390, s330, s280, s230, s170, s110, s70 3. Hardness: normal: 40-50hrc special: 52-56hrc, 56-60hrc density: 7.4g/cucm 4. Steel shot is used for industrial foundry, forging plant, heat treatment shop, steel construction plant, container manufacturer, ship builder, auto and locomotive manufacturer . 5. Microstructure: tempered marten site high strength, durable ervin life: cast steel shot: 2000 cycles
Products cast steel grit 1.Production specification: g10, g12, g14, g16, g18, g25, g40, g50, g80, g120 4.Hardness: gp:42-52hrc gl:53-60hrc gh:60-64hrc 5.Hardness deviation max deviation (-3.0 ~ 0.3)hrc 6.Durability 2000-2800 times 7.Microstructure tempered martensite or sorbite 8.Density 7.6g/cm3 9.Bulk density 4.2g/ cm3
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes Tubings: OD: Dia6-1800mm, with wall thickness ranging from 1-35 mm. Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement Furnaces for metallurgical processing: electrode arc + LF/VD/ESR/Vacuum consumable electrode. Ultrasonic inspection: 100% ultrasonic inspection Payment: T/T or L/C
Steel fiber refers to the short steel fiber, cutting the wire, and hook on both ends of the style compressed into in accordance with the relevant provisions, has certain strength.Steel fiber is mainly used in the manufacture of steel fiber reinforced concrete and application in the tunnel, industrial floor, etc.446 # steel fiber is a kind of brand, starting with four words, apart from 446, with four words beginning with 430;all begin with four words of steel fiber, is a stainless steel fiber, because they have a common characteristic, is containing chromium (cr). Steel fiber with corrosion resistant metals: chromium (cr), because of strong corrosion resistance of cr, so widely used in metallurgical industry, refractory material industry and chemical industry.Specific point is widely steel mills, used by metallurgical plant and chemical plant.Steel mill of steel water tank, for example, electrodes, metallurgy factory of furnace wall, furnace door, roof block, etc. After the stainless steel fiber mixed with refractory matrix, can greatly improve the heat resistant structure thermal cycle impact resistance, heat resistance and abrasion resistance performance of the grade, can extend the service life of refractory material and industrial furnaces several times to dozens times, prevent or reduce high temperature crack, improve the bending strength, improve the snap heat and cold resistance and improve the coefficient of thermal conductivity, so as to improve the work efficiency, reduce production costs.
Weathering steel is a series of low alloy steels between normal steel and stainless steel, carbon steel adds a small amount of copper, nickel and other corrosion-resistant elements, and tough, plastic with stainless steel rolling, forming, welding and cutting, abrasion, high temperature, fatigue resistance properties; weather resistance for carbon steel 2~8 double coating for carbon steel 1.5~10 times. Mainly used in railway cars, bridges, towers and other long-term use of steel exposed to the atmosphere. http://www.sellsteels.com/steel-plate/A588M.html
Similar Grades: DIN1.2379, D2, SKD11, Cr12MoV Shape: Round, Flat, Square Size Range: Diameter Thickness Width Length Round 80-600mm - - - Flat - 40-350mm 100-1000mm 2m-6m Steel-making Condition: EF, EF/EAF+LF+VD, EF/EAF+ESR Delivery condition: Annealed, Quenched+tempered Surface state: Black, Peeled, Rough turned, Ground, Grinded. Feature tool steel high wear resistance tool steel high compressive strength tool steel good through-hardening properties tool steel high stability in hardening tool steel good resistance to tempering-back Chemical Composition: C Si Mn Cr Mo V 1.40-1.60 0.10-0.60 0.10-0.60 11.00-13.00 0.70-1.20 0.50-1.10 Standard: ASTM A681-2008 Heat treatment: Annealed(+A) max: 255HB Annealing: slow cooling at 650ºC-850ºCfurnace Quenching: Preheat 650ºC~750ºC increased to 1010ºC, air-cooled, or into the 996ºC to keep the salt bath, then cooled. Tempering: The cold work tool steel general tempering temperature is 170ºC-190ºC , Double tempering of Double tempering of DIN1.2379 tool steel is recommended. Application: DIN1.2379Tool steel apply to metal stamping die, drawing die, stainless steel sheet stamping die, die with high hardness; Lightweight materials used for cutting, thread rolling dies, drawing, pressure pads ; highly wear-resistant plastic mold. Product Description Cold work tool steel containing high carbon high chromium. It with strong wear resistance and hardening. Suit the production of a larger interface, complex shape, heavy working conditions a variety of Die and Tool .
Hot sale!!! manual wheelchair with lowest price!!! 1.Specifications: 1) model no.: thl809 2) steel manual wheelchair 3) fixed armrest 4) fixed legrest 5) 8” pvc castor 6) 24” spoke wheel with solid tyre 7) seat width 41/46 8) max user weight 100kg 2.Discription: 1) the width betweent two wheels: 60cm 2) the width of folding: 23cm 3) seat(backrest) width: 41cm 4) wheel’s diameter: 59cm 5) castor’s diameter: 20cm 6) seat height: 51cm 7) total height: 87cm 8) total width: 106cm 9) seat deep: 40cm 10) backrest height: 40cm 3.Faq 1) what is your moq? A: our moq is total for one container. 2) what is your delivery time? A: it’s depend on your quantity and the shipment. Usually on 7-30days after order and deposit confirmed.. 3) what is the shipping port? A: usually in guangzhou or shenzhen. 4) what is your company location? A: our company is in foshan, guangdong, china. 5) what are your main products? A: we are specialized in electric wheelchair, manual wheelchair, commode chair, shower chair, walker, walking stick, rollator, hospital bed and other healthcare products.
Mehta steels is a seasoned supplier of ‘crane rails’ like cr 80 , cr 100 , cr 120 to various prestigious projects and companies around the world such as material handling , power projects , port and logistic projects , steel mills , sugar industries , engineering projects , etc. Mehta steels provides complete know how of the crane rail profiles of both indian as well as international origins. Mehta steels maintains regular stock for crane rails of indian origin. Crane rails of indian origin Cr 80 Cr 100 Cr 120 Cr 140*
Spec:350*350*800mm Wire dn:4.5*3*2.2mm Post dn:19*1mm Carbon steel Nw:3.25kg Gw:3.85kg Load capacity:50kg/layer Surfacing finish:chrome plated
Aluminium grating steps with oem service , can offer sample . With oxidation surface treatment .
We owns advanced steel grating pressure welding equipment and technology, advanced cad design system for grating. Our grating products can be made according to yb/t4001-1998, ansi/naamm (mbg531-93) and bs4592-1:1995. The hot dip galvanizing process conforms to gb/t13912-2002. Our products have been exported to many countries and regions such as japan, south korea, australia, britain, etc. And we are the reliable supplier for many government project in china .
Quick details Standard: aisi, bs, gb Grade: alloy Thickness: 12-600mm Place of origin: shanghai, china (mainland) Brand name: otai Model number: aisi p20, din1.2311/2311 Type: steel plate, steel plate Technique: hot rolled, forged/hot rolled Surface treatment: coated Application: ship plate Special use: wear resistant steel, mould steel Width: 200-1500mm Length: 1300-5000mm Shape: flat bar Surface condition: black/polish Certification: iso9001 Steel grade: plastic mould steel Alloy or not: alloy Density: 7.85 t/m³ Hardness:
Steel Grade: cold work steel Standard: AISI, ASTM, BS, DIN, GB, JIS Dimensions: Dia. 10mm-400mm Place of Origin: Guangdong, China (Mainland) Brand Name: OTAI Model Number: 5140 steel Technique: Hot Rolled Application: Tool Steel Bar Alloy Or Not: Is Alloy Special Use: Mold Steel Type: Alloy Steel Bar Density: 7.85t/m³ Facial color: black oxide layer or polished Production: EF/EAF+LF+VD/ESR Tolerance: -0/+1mm Standard: AISI,JIS,DIN,GB Hot treatment: annealed Length: 800-5800mm Certification: ISO9001 Hardness: =225HB Technique: hot rolled/forged/col drawn
Steel Grade: T1 Steel Standard: AISI, ASTM, BS, DIN, GB, JIS Dimensions: diameter:10-400mm Place of Origin: Hebei, China (Mainland) Brand Name: Yaoteng Model Number: T1 Steel Technique: Forged Application: Die Steel Bar Alloy Or Not: Is Alloy Special Use: Mold Steel Type: Alloy Steel Bar Standard: AISI,JIS,DIN,GB Steel grade: T1/1.3355/SKH2 Technique: forged Surface: black or bright Machining: milling,turning,polishing Shape: Round bars/Flat bar/Plate Steel making process: EAF+LF+VD+ESR Heat treatment: Annealing/Q+T Delivery condition: Hot rolled or forged/ Peeled or black Test: Ultrasonic Testing
Standards: gb/t, jis g , astm Thickness: 0.14-2.5mm; width: 30-610-1250mm Tolerance : +2/0mm, thickness tolerance :+0.02/-0.02mm (or according to customers' request). Coating mass: 50-275g/m2 Coil weight: 5-8 metric tons Coil dm: i.D: f508mm /610mm o.D: max f1500mm Surface type: big spangle , normal spangle, min-spangle, zero-spangle; Surface treatment: chromated, unoiled/oiled, bright finished, skin passed/non skin passed. Main usage : general use for roof, corrugated roofing making, household appliance, the outside of buildings, structures
Q235b hot rolled mild steel plate/carbon steel plate Chemical component: C :0.12~0.20 Si:=0.30 Mn:0.30~0.70 S :=0.045 P :=0.045 Cr:=0.30 Ni:=0.30 Cu:=0.30
