Light gauge steel framing is the way of the future for house construction. Steel framing is a highly efficient, cost-effective means of home construction and CMI has the expertise to assist owner builders and renovators considering steel frame house construction
Perfect solution in construction of extension and partition internal areas to be used as offices, rooms, etc. non-welded bolt-up. By the below feature , the light gauge steel framing for wall is more and more popular and accepted by the people .
1. Our wall frames are light, straight and true. Up to 50% lighter than a wooden frame.
2. Rust, termite & rot resistant materials ,
3. Straight and true framing for direct fix of other materials without packing or planing
4. Long-span capabilities
5. 3D virtual modelling & CNC manufactured components
6. Easy installation on site â?? no straightening of walls
7.·Lightweight construction reduces floor loads
8. Lower labour costs
9. Designed to suit the application and the contractor
Rail Height: 65mm
Bottom Width:54mm
Head Width:25
Web Thickness:7
Weight:8.42kg/m
The light rail is mainly used for the laying of temporary transportation lines and light locomotive lines for forest areas, mining areas, factories and construction sites.
Steel strand is the steel product consisting of strand steel wires, according to your necessary, the surface of the carbon steel can be galvanizing layer, zinc-aluminum alloy layer, aluminum-clad layer, copper-plated layer, epoxy resin coating, etc.
Steel rivets
Rivets
Product namesteel rivets
Materialaluminum, copper, brass, stainless steel, steel, iron, alloy zinc etc.
Finishpolishing; anodize; nickel, zinc, tin, chrome, silver plating etc.It also can be environmentally friendly
Typesopen type rivet, sealed type rivet, multi-grip type rivet, peel type rivet, grooved type rivet, drive type and so on
Headround head , flat head, snap head , and so on
Surfacefinished , with colar , polishing and so on
Moq10000pcs
Packing1.Inner-plastic bag; outer -standard carton box.
2. 1000 pcs in a plastic bag, 1plastic bags into one carton, then 20 cartons into one pallet
3.As your requirement, can be packed in wooden pallet too
Deliverywithin 15-20 workdays after deposit or payment received
Payment termsl/c, t/t
Trade termsexw, fob, cfr, cif
Standardgb, din, jis, bsw, aisi and iso
Production process:
Wire --- shank head --- rivet mandrel assemblypolishing-- final inspection packing --- delivery
Product advantages:strong anti-tear, resistance friction, resistance dirt, resistance oil and resistance weather are very good, the max resitance weather 300â°c; suitable for bar code, suitable end face weld.
The test must be carried out in a simulated real use environment.
Product mode:pmlb-bst 220/300
Packing:500pcs/roll
Shipped:by 20' container vessel
Product advantages:strong anti-tear, resistance friction, resistance dirt, resistance oil and resistance weather are very good, the max resitance weather 300°c; suitable for bar code, suitable end face weld.
The test must be carried out in a simulated real use environment.
Product mode:pmlb-bst 220/300
Packing:500pcs/roll
Shipped:by 20' container vessel
Product mode:pmlb-bst 220/260
Size:80mm*100mm
Packing:500pcs/roll
Shipped:by 20' container vessel
Product advantages:strong anti-tear, resistance friction, resistance dirt, resistance oil and resistance weather are very good, outdoors can be stored for 2 years, the max resitance weather260â°c;suitable for bar code , suitable end face weld
The test must be carried out in a simulated real use environment
Designation by Standards
Mat. No. DIN EN AISI
1.2746 45NiCrMoV16-6 - -
Chemical Composition (in weight %)
C Si Mn CrMo Ni VWOthers
0.450.250.701.500.794.000.50 - -
Description
Special cold work tool steel, air or oil hardenable with highest toughness.
Applications
Forging tools, dies of all sorts, shapes and sizes, hot forging and pressing tools for steel and metal. Moulds, bushings, piercers, etc.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.86
Soft Annealing
Heat to 610-850oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 295.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to approx. 650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 880-910oC followed by air or oil quenching or warm bath quenching 180-220oC. Hardness after quenching is 56 HRC.
Tempering
Tempering temperature: See the data bellow.
Tempering Temperature (oC) vs. Hardness (HRC)
100oC200oC300oC400oC500oC550oC
565452504948
Tempering Diagram
Click the image to enlarge the diagram.
Forging
Hot forming temperature: 1100-900oC.
Machinability
No data.
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available
.Specifications of carbon steel plate
Round bar
Diameter(mm) length (mm)
10~800 300~5800
Plate thickness(mm) width (mm) length (mm)
Max:800 205~810 2000~4000
2.Chemical compositon(%) of carbon steel plate
C mn s i cr nicu s p
0.42~0.500.5~0.80.17~0.370.250.30.250.0350.035
3.Delivery condition and heat treatment
Forging normalization hardening subcritical annealingisothermal annealing tempering
1100~850* 840~880 820~860 water 650~700* 820~860
600x1h* 550~660
4.Characteristic of carbon steel plate
Nice machanical porpertys and worse hardenability, so, it is used for machine parts.
5.Application of carbon steel plate
1): can be used in many fields such as building, automobile, shipbuilding,
Petrochemical, machinery, medicine, food, electric power, energy, space, building
And decoration, etc.
2): can be made into mould template, mortise pin, column
3): this kind of steel have good mechanical property, is widely used in structural
Parts which may support stress alternation, especially made into some connecting
Rods, bolts, wheel gear...
4): this kind of steel is the most common blanks and materials of shaft part.
4 cr13 characteristics after quenching than 3 cr13 high hardness, good corrosion resistance
Application :
Rj, nozzle, valve seat, etc. 1 cr17ni2 features strong resistance to corrosion of nitric acid and organic acid. Use used for high hardness and high wear resistance of hot oil pump, valve, valves, bearings, medical equipment, spring, etc
Name:1.2345 steel round bar
Place of origin:hubei, china
Brand name:better
Shape:round bar
Material:tool steel
Steel grade:1.2345
Application:used to making important parts like hot-extrusion die, hammer forging die, aluminium alloy casting, etc.
Chemical composition
C si p s cr mo mn
0, 48 - 0.53 0, 90 - 1, 20 0.20 - 0, 40 max. 0, 030 max. 0, 030 4, 80 - 5, 20 1, 20 - 1, 50
Packing&delivery:
Packaging details: according to customer's requirements or export's standard
Delivery time: in 45-60 days after we receive 30% deposite
Port: wuhan or according to your requirements
Moq: 3 ton or according to your requirements
Trade terms exwfob/cfr/cif or according to your requirements
Standard:
Astmusaameirican society of mechanical engineers
Aisiusaacronym of american iron and steel institute
Jisjpjapanese industrial standards
Dingerdeutsches institutr normung e.V.
Unsusaunified numbering system
Hot rolled craft with good mechanical performance, all the bars are prime quality with canonical certificate.
