Steel strand is the steel product consisting of strand steel wires, according to your necessary, the surface of the carbon steel can be galvanizing layer, zinc-aluminum alloy layer, aluminum-clad layer, copper-plated layer, epoxy resin coating, etc.
We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.
Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. steel billets from 45 x 45 mm to 150x150 mm, and round steel billets from 120 mm to 270 mm in diameter. Length : Specifiable up to 12 m Quality : In various internationally well known standards including afnor (nf), aisi, astm, bs, din, euronorm, gost, jis, iso, sae, si, ts, uni, etc. (eg. Astm a 615 gr 40 or 60, bst 420 s, din 488, st 37.2 din 17100, nfa 35015 and 16, bs 4449 (gr 250 or 460), jis g 3112 (sd 30, 35, 40), si 739 s 400, si 739 s 400 w, feb 44 k, 3 sp/ps or 5 sp/ps gost 380 88, 35 gs or 25 g2s, gost 5781-82, etc) Other grades available according to customer's request
Features Of Steel Billets Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross-section less than 36 square inches. They are used for the manufacture of all ‘long’ steel products such as bars, rods, pipes, tubes, wire and wire products.
Material:45#- 75#,77B,Q235etc Dia: 1.0mm-6.0mm Constructions :1X3, 1X7 ,1X19,1X37 Zinc coating :100g/m2 - 800g/m2 Grade A/ B /C ? Breaking strength:350mpa-2200mpa YB/T 5004-2001, GB/T 3428-2002,CAN/CSA-G12,BS 183/BS443,BS EN 10244,ASTM A 475,ASTM A 363 Its widely used in domestic & abroad power, cable, telecommunication, broadcast and television industries. We can produce very heavy zinc thickness steel wire,for example 800 g/m2 for 3.00mm. Packaging Details: water-proof paper on drums or in coils Delivery Time: 20 days after confirmed order Payment Terms: L/C,T/T
Wire rope and wire strand in different structure and specifications . Steel coils , steel strips, steel fibers, steel tubes, etc
Stranded galvanized steel wire 1¡Á7£5.4/1.8 ton 1. Strand wire should have the same diameter, the same intensity, and the same level of zinc coating. The diameter and the lay length should be uniform, and have no loose after cutting Strand wire should be tight; they should not be staggered, and have no breaking and bending. 2. Strand wire and the overhead ground wire of 1 * 3 are not allowed to connected, other types of strand wire should be connected with welder. The distance between any two joints shall not be less than 50m; the measures should be taken to prevent the joints eroding. 3. Mechanical Properties it should follow the 5.3 mechanical requirements in "People's Republic of ferrous metallurgy industry standard YB/T5004-2001. 4. Coating quality 4.1 Galvanized steel's surface should be coated with uniform continuous layer of zinc, without cracks and open spots 4.2 Zinc coating of the steel can have white spots, flash point and the individual accumulation of zinc layer, but can not affect the use. But the value of the local wire must not exceed 2 times as large as the positive deviation of the diameter. 4.3 The coating quality of the strand wire with the split shares should meet the following table: Nominal steel diameter MM Coating mass/(g/©O) Not less than Around the core posts The diameter should be steel The diameter should be multiple Special A A 3 1.00 180 160 20 12 1.10 1.20 1.30 200 1.40 30 1.50 1.60 180 1.70 220 12 1.80 60 2.00 230 200 14 2.20 80 2.40 240 220 100 2.60 250 2.80 270 250 130 3.00 270 3.20 280 260 3.50 290 270 150 3.80 4.00 4.4 The zinc coating should be firmly enlaced 6 laps on the mandrel in the above table, no cracking or the zinc coating layer. It can not be able to wipe with the extent of bare fingers. 5. Refer to "the People's Republic of ferrous metals industry standard YB/T5004-2001 galvanized steel wire¡±. "People's Republic of ferrous metallurgy industry standard YB/T183-2000 strand of rare earth alloy coating¡±. (B) The raw materials 1. The steel of the strand wire shall be used in the requirement of YB/T699-1999. The steel grades are 5 # or 50 #. 2. Zinc ingot, used in galvanized steel wire, should use the zinc in GB/T470 of 0 or 1. (C) Factory inspection and testing methods all the factory inspections are divided into full inspection and spot inspection. Full inspection requires checking the appearance, structure, diameter, galvanized coating mass, twist method and its quality of each steel stranded wire. 1. Inspect the surface quality of the strand by visual inspection. 2. Use the measuring tool of 0.1mm to inspect the diameter of the strand. 3. Breaking load test is required according to the standard GB/T8358-1987.
1)name: pc strand (prestress concrete steel strand) 2)construction: 1x7 3)diameter: 0.8-15.7mm 4)surface: galvanized or ungalvanized, non coated 5)tensile strength: 1570-1960 mpa 6)standard:astm a421-98, bs 5896-1980, gb5224-2003 7)application:highway, bridge, building etc Packing:1000m rool or as your order
Material: SWRH82B Size: 1*7 wire 9.53mm, 12.7mm, 15.24mm, 15.7mm Grade: 1860MPa Relaxation Rate: 2.5% Elongation Rate: â?¥3.5% Standard: ASTM A416, BS5896-2012 Coil Dimension: Inner Diameter: 800m; Outer Diameter: 1400mm; Width: 750mm Coil Weight: 2.5-3.2MT/Coil Packing: Coils wrapped by 8 steel strips Fully wrapped with waterproof & P.P woven sheet Fixed with wooden pallet Strapped at 8 places with steel strips
We are an ISO 9001 certificated manufacturer of Galvanized(Zinc-Coated)steel wire & Strand, for Power & Communication cables materials, Static(Overhead Earth) wire, Guy(Stay) wire , Steel structural, Agricultural & fence usage. We can provide below quality goods: 1)Messenger wire Size: 7×1.4mm to 7×4.19mm ( 3/16inch, 1/4inch, 5/16inch, 3/8inch, 1/2inch) Standard: ASTM A 475-98 2)Galvanized steel core wires for Aluminum conductor ( ACSR) Size: 1.44mm to 4.77mm , 7×1.44mm to 7×4.25mm , 19×1.6mm to 19×4.0mm Standard: ASTM B 498, BS 4546, IEC 60888, EN 50189 3)Galvanized steel wires strand for poles or communication towers (Stay wire/guy wire of Poles or towers; Ground wire or Earth wire ) Size: 7×1.4mm to 7×4.25mm , 19×1.6mm to 19×3.8mm,3×2.64mm to 3×4.00mm Standard: ASTM A 363, ASTM A 475, BS 183... 4)Galvanized steel wires or strand for Cattle cable/Greenhouse/Fence Size: Plian wire 2.5, 2.8, 3.15, 4.0mm, 8.25mm with 7 wires, 10mm with 19 wires,7×1.57mm(3/16inch) With high quality, our goods have being expored to USA, Bahrain, Mexico, Chile, Peru, France, Vietnam, Phillippines over 25 countries.
