GB 6653 gas cylinder steel plates and strips are steel designed for manufacture of welded gas cylinders. The hot rolled GB 6653 gas cylinder steel plates and strips thickness range is 2-14mm, and the cold rolled GB 6653 gas cylinder steel plates and strips thickness range is 1.5-4mm. GB 6653 technical standard specifies the size, shape, weight and allowable deviation, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of HP235 steel, HP265 steel, HP295 steel, HP325 steel, HP345 steel plates and strips for welded gas cylinders. Hot rolled GB 6653 gas cylinder steel plates and strips shall be delivered in hot rolled, controlled rolled or heat treated condition. After negotiation between the supplier and the demander and indicated in the contract, hot rolling and pickling can be carried out. Cold rolled GB 6653 gas cylinder steel plates and strips are delivered in annealed condition.
S235JR carbon steel plate is a kind of hot-rolled non-alloy structural steel under European standard EN 10025-2. The S235JR carbon steel plate has good plasticity, toughness, weldability and cold bending. Please refer to the following table for specific parameters: EN 10025-2 S235JR carbon steel plate has been widely used in the structural industry and is also a necessity in the construction industry. BBN steel sells S235JR carbon steel plate up to 500,000 tons every year, so BBN steel has quite rich experience in the production, processing and export of this kind of steel. If you need S235JR carbon steel plate, please contact us for advice.
ASME SA283 / SA283M - 03 is a specification for low and intermediate tensile strength carbon steel plates of structural quality for general applications. It cover four grades, A, B C and D, which have specified minimum yield strengths of 24, 27, 30 and 33 ksi, respectively. BBN STEEL can supply SA283 Grade B steel plates, SA 283 Gr B hot rolled sheets, SA283 Gr.B steel H beams and SA283Gr.B steel angles with high quality. ASME SA283 Grade B ms mild steel plate specification Thickness: 1.2-600mm Width:1220-4200mm Length: 5000-18000mm Notes: coil thickness â?¤ 25mm Shapes: plates, heavy plates cutting, sheets, steel angle, H beams, steel channels and I beams Manufacturing types: hot rolled
ASTM A516 Grade 70 (A516 Grade 485, A516Gr70) material is a carbon steel plate for moderate and low temperature service. The maximum thickness of plates is limited size 205mm/8inch, only by the capacity of the composition to meet the specified mechanical property requirements. A516 Grade 70 steel offers amazing weld-ability and amazing toughness, which is perfect for services at moderate and lower temperature ranges. We can supply A516 Grade 70 steel plates and A516 Grade 70 sheet stock with competitive price. A516 Grade 70 steel equivalent: EN 10028 P355GH A516 Grade 70 boiler steel plate size Thickness: 3-250mm Width: 1220-4200mm Length: 3000-18000mm Notes: coil thickness â?¤ 25mm Why Choose BBN Steel? 1. Competitive price and quality from our own factory 2. Approved by ISO9001, CE, SGS every year 3. Best online service with 24 hours reply 4. Deep processing service: cutting, welding, drilling, grinding, turning 5. Smooth production ability (3000tons/month)
A387 Grade 12 Class 2 steel can be used in high temperature environment of industrial boiler and pressure vessel manufacturing industry, the steel contains more molybdenum chromium element, which makes the ASTM A387 Grade 12 Class 2 has slight corrosion resistance, although compared with stainless steel, corrosion resistance seem a bit small, but compared with other types of steel is more durable, economical and practical. This is one of the reasons why ASTM A387 Grade 12 Class 2 steel is so popular. A387 Grade 12 Class 2 pressure vessel plate specification: Shapes: plates, sheet, steel strips, angle, channel and round bar Thickness : 1.5-200mm Width: 1220-4200mm Length : 5000-18000mm Notes: coil thickness â?¤ 25mm Why Choose BBN Steel? 1. Competitive price and quality from our own factory 2. Approved by ISO9001, CE, SGS every year 3. Best online service with 24 hours reply 4. Deep processing service: cutting, welding, drilling, grinding, turning 5. Smooth production ability (3000tons/month)
JIS G3125 SPA-C steel plate is one of the most popular products in the product category of weathering steel of BBN steel. Spa-c sheet has excellent resistance to atmospheric corrosion. It is widely used in air preheater, energy saving devices, railway cars, container production, bridge construction, construction and so on. SPA-C low alloy� steel specification: Shapes: plates, sheet, steel strips, angle, channel and round bar Thickness : 1.5-150mm Width: 1220-4200mm Length : 5000-18000mm Notes: coil thickness â?¤ 25mm Why Choose BBN Steel? 1. Competitive price and quality from our own factory 2. Approved by ISO9001, CE, SGS every year 3. Best online service with 24 hours reply 4. Deep processing service: cutting, welding, drilling, grinding, turning 5. Smooth production ability (3000tons/month)
A573 Grade 70 Carbon Steel Plate Latest price: 625 USD/ton ASTM A573 covers structural quality carbon-manganese-silicon steel A573 Grade 58, A573 Grade 65 and A573 Grade 70 plates in three tensile strength ranges intended primarily for service at atmospheric temperatures where improved notch toughness is important. Product name : ASTM A573 Carbon steel, A573 steel plate, A573 Structural steel plate, ASTM A573 Welding structural steel plates Dimension range : 1.2mm -680mm x 1000mm-4000mm x 1000mm-18000mm MOQ: 1 PC Product type : Steel plate Delivery time : Promptly ( Stock) or 10-40 days (Production) Stock : Available MTC: Available Payment Term : T/T or L/C At sight BBN Steel is a professional supplier of steel plate and steel section products in China. Welcome to contact us if you are interested in EN A573 Grade 70 steel price.
ASTM A588 Grade B(A588 Gr B) is a high-strength low-alloy structural (HSLA) steel in various shapes: plates, sheets, round bars and steel sections. This plate has a specified minimum yield strengths of 50ksi [345MPa] when plate thickness under 100mm. As a leading supplier of HSLA steel plate and sheet in China, we can supply A588 Gr B HSLA steel plate specification with various shapes and thickness up to 200mm[8 inch]. Mechanical properties Tensile strength min. MPa 485 Yield strength min. MPa 345 Elongation min. 21 ASTM A588 Gr B HSLA plate sheet specification Dimension range : 1.2mm -680mm x 1000mm-4000mm x 1000mm-18000mm MOQ: 1 PC Product type : Steel plate Delivery time : Promptly ( Stock) or 10-40 days (Production) Stock : Available MTC: Available Payment Term : T/T or L/C At sight For application, ASTM A588 Gr B HSLA plate and sheet in most environments are substantially better than that of ordinary carbon structural steels. When properly exposed to the atmosphere, this steel can be used unpainted for many applications.
PLATE IS 3502 / ASTM - A36 OR IS: 2062 GR. BR ASTM - A572 GR. 50 OR ASTM-A131-AH 36 SS 316 L ASTM - A36 OR IS: 2062 GR. BR IS 3502 GR .BR OR ASTM-A36 10 THK / 8 THK CHQ PLATE 10 THK PLATE 10 THK PLATE SS FLAT BAR 50X6 / 100X6 6 THK BENT PLATE
Finished steel flat products are produced from slabs/thin slabs in rolling mills using flat rolls. These are supplied in Hot Rolled (HR), Cold Rolled (CR) or in Coated condition depending upon the requirement. Flat products include slabs, hot-rolled coil, cold-rolled coil, coated steel products, tinplate and heavy plate. They are used in heavy machinery, automotive , pipes , construction, packaging and appliances. Then steel is further process into hot rolling mill which gives it the desired shape that can be used in various industrial applications.
SCFM C-shaped Steel Bracket C-shaped Steel is processed by the C-style automatic Molding Machine,the processing step is as belows, Discharging-Levelling--Molding--Shaping--Straighten--Measuring--Punching Hole--Punching Elliptical Coneection Hole---Cutting C-shaped Steel is mainly used for industrial workshop, civil construction, municipal engineering, oil platform, Bridges,'s girders, electrified railway electricity bracket, along the railway bridge steel structures such as light, super light h-beam very suitable for container, mobile houses, all kinds of garage, box train, electrical stents, various venues, small villas manufacturing. Size 80x40x2mm to 380x110x4mm Length 6m or as clients' request Material Q195,Q235,Q345,SS400, ect. Standard Chinese standard,ASTM,EN,JIS etc.
Specializing in the product Hot rolled steel coil steel sheet steel plate Company introduction Business Type: Trading Company Main Products: ERW Steel Pipe,Square Pipe,Steel Sheet,Steel Coil,Steel Strip Location: Tianjin, China (Mainland) Year Established: 2008 Year start exporting: 2002 Number Of Employees: 51 - 100 People Total Annual Sales Volume: US$10 Million - US$50 Million Main Markets: Western Europe, North America, Africa, Southeast Asia, Eastern Europe Average Lead Time: 30 Day(s) Product Description 1.Thickness:1.5-15mm 2.Width:600-2000mm 3.Standard:AISI,ASTM,BS,DIN,GB,JIS 4.Material:Q195,Q235B,SS400,ASTM A36,SPHC,etc. product name Hot rolled steel coil sheet plate thickness 1.5mm-15mm width 600mm-2000mm762mm,914mm,1000mm,1200mm,1219mm,1250mm application Transport, construction, shipbuilding, gas containers, etc standard AISI,ASTM,BS,DIN,GB,JIS material Q195,Q235B,SS400,ASTM A36,SPHC,etc. supplier HBIS, AnSteel(Sochi Olympic Supplier), BaoSteel,etc surface treatment chromated and oiled, chromated and non-oiled packing export standard package. payment T/T, L/C or DP min order 10tons or 25 tons (one 20ft FCL) coil weight 3-8ton or as client requirement
Steel Products with all types of specifications, grades and specified dimensions with required tolerance limit. According to customer’s requirement various shapes & sizes of steel plates are available for industrial sector.
Custom-designed
Steel plates are often used for structural and construction applications, pressure vessels, marine and offshore equipment, and military applications. It can be used anywhere where a connection between 2 beams is required. They are used for base plates, end plates, stiffeners, gussets, tabs, splice plates and many more. In some cases they add strength to a beam when welded along the length of a beam (top or bottom).
Cold rolled steel coil (full hard) 1. Width: 600~1570mm 2. Thickness: 0.13~2.50mm 3. Grade: jis g3141-spcc-1b, spcc-1d 4. Coil weight: 3~14mt 5. Coil id: 508mm/610mm 6. Surface: dull finish/bright finish 7. Oil: slight oiled 8. Moq: 60mt or by negotiation Plastic film+water proof paper+steel plate+packing steel strip. Hot dipped galvanized steel coil / sheet Hot dipped galvanized steel coil / sheet 1. Width: 600-1570mm 2. Thickness: 0.13-5.0mm 3. Grade: jis g3302-sgcc-sgc570, sgch (full hard-g550), sghc-sgh540 En10346-dx51d+z, dx53d+z, s250gd-s550gd Astm a653-cs-b, ss255-ss550 4. Coil weight: 3-14mt 5. Coil id: 508mm / 610 mm 6. Chemical treatment: chromated (cr 3+, 6+, 0+) 7. Surface: skin-pass / non skin-pass 8. Oil: slight oiled / dry 9. Spangle: regular / zero / big 10. Zinc coating: z50gr/m2~z400gr/m2 (both side total coating thickness) 11. Packing: export standard packing: plastic film + water proof paper + steel plate+ packing steel strip 12. Capacity: 1, 500, 000mt / year 13. Moq: 40mt per size, or by negotiation 14. Loading port: tianjin port or other port Standard export packing: plastic film + water proof paper + steel plate+ packing steel strip
Ppgi 1. Width: 600~1250mm 2. Thickness: 0.19~1.50mm 3. Grade: jis g3312-cgcc, cgc340-570, (g550) Astm a755m cs-b, ss255-ss550 4. Coil weight: 3~14mt 5. Coil id: 508mm/610mm 6. Chemical treatment: chromated (cr 3+, 6+, 0+) 7. Surface: skin pass/non skin pass 8. Oil: slight oiled/dry 9. Spangle: regular/zero/big 10. Zinc coating: z50~z600gr/m2 (both side total coating thickness) 11. Moq: 25mt per size/color 12. Packing: standard export packing Standard export packing: plastic film + water proof paper + steel plate+ packing steel strip
Plate Thickness : to a maximum of 200 mm; Width : from 1250 mm to 2500 mm. Coil Thickness : to a maximum of 20 mm; Width : up to a maximum 2000 mm
We have a machining center and can supply Longitudinal Shear, Transverse Shear, Separation and meanwhile Roofing sheets. We can accept flexible payment terms, such as, TT, Sight LC, Usance LC, CAD, DP, OA, ect. And we can accept a trial order of 25mt, according to buyers as well.
During hot rolling, steel is heated above its recrystallization temperature and passed through a series of rollers to reduce its thickness and shape it into sheets or plates size:10mm to 200mm widht:Max 4 m
