O1 steel also is called DIN 1.2510 and JIS SKS3 steel. High content for manganese, chromium and tungsten in 1.2510 steel composition, that could increase the hardening ability. Then the steel does not need to undergo water quenching. After oil cooling and quenching, the hardness could reach 62HRC. O1 tool steel round bar sheet plate was used widely as a cold work mold steel. It is a great material for the blade, metal molds and etc. O1 Steel Application 1.2510 steel is used as a material of tough parts. Such as punches, knock-out pins, cams, and of course, knife blades. And 1.2510 steel is mainly used for short-run tooling for cold forming dies, blanking dies, and cutting tools operating at ambient temperature. Typical applications for O1 tool steel are blanking, forming, and trim dies, gages, slitting cutters and etc. Notice We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of O1/1.2510 steels materials. Songshun Steel always with you. Dongguan Songshun Mould Steel Co., LTD which is an industrial and trading company with 3500-7000ts hydraulic forging machine. We provide a great variety of steels, competitive price with good quality and keep the large stock are over 20000 tons.
D6 steel is a high-carbon, high chromium tool steel alloyed with tungsten that is characterized by high compressive strength, high wear resistance, high surface hardness and good hardening stability. It is also called SKD2 steel and DIN 1.2436 steel. And D6 steel chemical composition and heat treatment information are below. Tool steels are primarily used to manufacture tools that can be used for machining metals, woods, and plastics. They are generally ingot-cast wrought products, and have the potential to be stable at elevated temperatures and withstand high specific loads. D6 Steel Application SKD2 steel chemical composition makes it become good tool steel in the industry. SKD2 steel is used for forming tools; molds for abrasive plastics and ceramics; long-run press tools; blanking and shearing tools for hard materials; stamping tools; scraping tools and etc. D6 Steel Round Bar Sheet Plate Heat Treatment Forging SKD2 tool steel is heated slowly and uniformly to 700�°C (1292�°F) and then more rapidly to 900-1050�°C (1652-1922�°F). Annealing SKD2 tool steel is then annealed at 800-840�°C (1472-1544�°F) and cooled. Hardness of the steel after annealing will be approximately 225 Brinell. Stress Relieving Stresses from SKD2 tool steel can be eliminated before hardening by heating up to 650-700�°C (1202-1292�°F), if machining operations have been heavy. The steel is then allowed to cool slowly. Hardening SKD2 steel is pre-heated slowly to 750-800�°C (1382-1472�°F) and thoroughly soaked. Heating is then continued till the final hardening of 950-980�°C (1742-1796�°F), followed by air or oil quenching. Tempering The SKD2 steel is heated uniformly and thoroughly at the selected tempering temperature. Double tempering can also be carried out with intermediate cooling to room temperature. Notice We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D6/SKD2 steels materials. Songshun Steel always with you.
D3 steel also knows as DIN 1.2080 and JIS SKD1, which is a 12% chrome alloy steel. JIS SKD1 steel has very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. D3 Steel Application 1.Highly stressed cutting 2.Punching tools for thin sheet 3.Blanking and forming dies 4.Forming rolls 5.Drawing and deep drawing tools 6.Slitting Knife 7.Stone processing tools 8.Pressure pads 9.Thermosetting plastic molding D3 Steel Round Bar Sheet Plate Heat Treatment Heat Treatment SKD1 steel requires hardening and tempering to achieve maximum properties. For maximum accuracy, the parts of SKD1 tool steel should be stress relieved after roughing operations. Stress should be relieved at 648 C (1200 F) for one hour and cooled slowly. Annealing Annealing of SKD1 steel needs to be done in a controlled atmosphere furnace. D3 steels should be heated thoroughly to 871 C (1600 F) and cooled slowly at a rate of not more than -6 C (20 F) per hour, until the furnace is black. Then the material should be removed and air cooled. Tempering The SKD1 steel should be cooled to room temperature and should be tempered immediately. The parts should be placed in the tempering furnace and increased slowly to the desired tempering temperature. Tempering for 1 hour per inch of thickness is required. Hardening SKD1 steel should be heated properly since it is very sensitive to overheating and if not heated maximum hardness cannot be achieved. The work should be directly placed in a furnace preheated to 954 C (1750 F) and soaked for 20-25 minutes, plus 5 minutes per inch of thickness, and then oil-quenched to harden it. Notice Other specifications are determined by daily stock. Customization is also acceptable. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D3 tool steels materials. Songshun Steel always with you.
Heat Treatment DIN 1.2379 steels alloy should be preheated very slowly to 815 (1500 F) and the temperature can be increased to 1010oC (1850 F). Then held at 1010oC (1850 F) for 20 to 45 minutes and air-cooled (air quenched). Annealing Annealing of 1.2379 tool steels material should be done at 871 to 898 C (1600 to 1650 F) followed by slow furnace cooling at 4.4 C (40 F) per hour or less, after which cooling rate could be increased. At the same time, must do something to prevent excessive carburization or decarburization. Stress Relieving Heat it slowly to 1050 -1250 F, allow to equalize, and then cool in still air(Strain Relieving) Preheat Prior To Hardening Preheat slowly to 1350 -1450 F and hold at this temperature until steel 1.2379 steel material is uniformly heated. Hardening After thorough preheating, heat to 1800 -1850 F. Hold it at the hardening temperature until it is completely and uniformly heated. Quenching DIN 1.2379 steel tool material is an air hardening steel and will develop hardness on cooling in still air. To avoid scaling and prevent decarburization on the surface, controlled atmosphere or vacuum furnaces are recommended. Parts should be allowed to cool to 150F, or to where they can be held in the bare hand, and then temper immediately. Tempering The tempering temperature on material 1.2379 steel may be varied according to the desired hardness. 1.2379 steels can be tempered at 204 C (400 F) for achieving Rockwell C hardness of 61 and at 537 °C (1000 F) for a Rockwell C hardness of 54. Compare Chinese Cr12Mo1V1 steel, American D2 steel, Japanese SKD11 steel, the chemical composition of them is the same, but the performance is very different. After heat treatment, the color of Cr12Mo1V1 is a little orange-red, and the deformation would be large. It is easy to fracture during use. And the hardness of D2 steel is higher than SKD11 steel, but the toughness is not better than SKD11 steel. SKD11 steel is light and smooth, with the best overall performance. D2 Steel Forging Heating for forging of AISI D2 tool steel should be done slowly and uniformly. Soak through at 1850 -1950 F and reheat as often as necessary, stopping work when the temperature drops below 1700 F(926 C). After D2 mold steel forging, cool slowly in lime, mica, dry ashes or furnace. D2 steel should always be annealed after forging. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a
D2 steel round bar and plate can be used to produce cold work mold with a large cross-section, complex shape, high impact force, and high wear resistance. It also is called DIN 1.2379 and JIS SKD11 steel. It is a high-carbon and high-chromium cold work mold steel. It is widely used in the world. It has high hardenability and the high-temperature oxidation resistance is good. The anti-corrosion ability is good after quenching and polishing, and the deformation is small after the steel heat treatment. D2 Steel Application 1.2379 steel is used for blanking or forming dies, thread rolling dies, shear knives, food-processing knives, gauges, punches and etc. AISI D2 Steel Round Bar Plate Sheet Supply We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D2/1.2379 steels materials. Songshun Steel always with you. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!!
Type : Steel Flat Bar Standard : STM, AISI, EN, DIN, JIS, GB Grate : A36, S235jr, St37-2, SS400, Q235, Q195 Technique : hot rolled, slitted, round edge Size ; Width Thickness Length : 10-200mm 1.5-30mm 6m, 9m, 12m or to order OEM : yes Tolerance : As the standard or your requirement Application : Construction/Shipbuilding/Machinery manufacturing/Steel structure Features 1. High quality Features 2.High dimensional accuracy 3. High utilization rate of material 4. Saving cost price Packing Details 1. Iron sheet in both ends 2.All wrapped packing with plastic woven bag 3.Loose package 4.As the requirement of customer.
Product Name Stainless Steel Flat Bar / Rod Material 201/202/304/304L/316/316L/321/410/420/430/440C/S31803/S38815/S30601etc. Specifications Round bar Diameter: 3mm~800mm Angle bar Size: 3mm*20mm*20mm~12mm*100mm*100mm Square bar Size: 4mm*4mm~100mm*100mm Flat bar Thickness: 2mm~100mm ; Width: 10mm~500mm Hexagonal bar Size: 2mm~100mm or as per customerâ??s request. Technique cold rolled & hot rolled & COLD Drawn, Polish Surface acid pickling/Mirror polish/Color coating/Brushed/Common polishing Standard ASTM AISI EN DIN GB Packing Standard export packaging or as per customerâ's request
Product Name Stainless steel hexagonal steel Material 201ã??202ã??301ã??302ã??303ã??304ã??304lã??316ã??316lã??321ã??309sã??310sã??317lã??321ã??347ã??904l etc Type Round,square,hexagonal,flat,angle Surface Pickled,Black,Bright,Polishing,Blasting,etc Round bar 3mm~800mm Angle bar 3mm*20mm*20mm~12mm*100mm*100mm Square bar 4mm*4mm~100mm*100mm Flat bar Thickness: 2mm~100mm,Width: 10mm~500mm Hexagonal 2mm~100mm Length 6m,5.8m,12m or as required Application chemical industry, shipping industry, manufacturing industry, construction,decorate Industry, electric power, pump shafts,sanitary wares ,furniture handles,boiler, high temperature resistant,low temperatureresistant, corrosion resistant. Tips The sizes or thicknesses of stainless steel bars can be customized, if you need additional information, please donâ??t hesitate to contact us at any time.
Product Name Stainless Steel Bar Material 200 Series 300Series 400Series Type Round,square,hexagonal,flat,angle Surface Pickled,Black,Bright,Polishing,Blasting,etc Round bar 3mm~800mm Angle bar 3mm*20mm*20mm~12mm*100mm*100mm Square bar 4mm*4mm~100mm*100mm Flat bar Thickness: 2mm~100mm,Width: 10mm~500mm Hexagonal 2mm~100mm Length 6m,5.8m,12m or as required Application chemical industry, shipping industry, manufacturing industry, construction,decorate Industry, electric power, pump shafts,sanitary wares ,furniture handles,boiler, high temperature resistant,low temperatureresistant, corrosion resistant. Tips The sizes or thicknesses of stainless steel bars can be customized, if you need additional information, please don�¢??t hesitate to contact us at any time.
Product name Angle bar Thickness 3~24mm or customer's requirements Width 20~200mm or customer's requirements Length 6~6.1 Meters or as customer's requirements Standard ASTM A53/ASTM A573/ASTM A283 GB/T706-2008, GB/T706-2016 DIN17100-80, JISG3192-94 Material Q195,Q215,Q235B,Q345B,S235JR/S355JR/SS400 Finished Black/Galvanized/Coated/Oiled/Painting,etc. Usage Widely used in various building structures and engineering structures, such as building beam, bridge, power transmission tower, lifiting and transporting machinery, ships, industrial furnaces, reaction towers, container racks and warehouse.
Grade:ASTM 303,304/L,316/L,321,316Ti, 310S,309S, 201,202,205,204+Cu,410,420,430,446 and Other as per customer's requirement Size: dia1-500mm Finish: cold drawn,peeled, bright finish Package: plastic and woven pack or wooden box Payment: TT30% down payment the balance before carrying Mill test Certificate supplied
Execution MM Inches ISO Tolerance Cold Drawn and Polish 2.50-75.00 1/8"- 3.00" h8-h9-h10-h11, ASTMA-484 Cold Drawn and Ground 8.00-75.00 5/6"-2.50" h8-h9-h10-h11 Peeled and Polished 40.00- 150.00 1.50"-6.00" h11, ASTMA-484 h11-DIN 1013 Peeled and Ground 20.00-50.00 3/4" 2.00" h9-h10-h11, ASTMA-484
Execution MM Inches ISO Tolerance Cold Drawn 3.50-40.00 3/16"-1. 1/2" h11 Polished and Ground 5.00-40.00 3/16" -1.1/2" h11
Execution MM Inches ISO Tolerance Cold Drawn 4.00 -40.00 3/16"- 1.1/2" h11 Polished and Ground 5.00 -36.00 3/16"-1.1/2" h11 All the above Products are available in Alloy Steel, Stainless Austenitic Steel, Ferritic Steel as well as Martenisitic Steel Grades.
DRAWN FLAT BARS S.S. Flat Bars have over a period gained tremendous importance as it is now the most preferred material in Architectural Structures, Building Frames and Structures, Decorative Hardware and also for various general purposes for shaft keys and special purpose applications. DH manufactures a wide range of flat bars in a variety of sizes, thickness, grades and finish suited to critical applications. These are produced to international specifications, maintaining close dimensional tolerances and required mechanical properties. Technical Specification: SIZES GRADES FINISH 6.00 X 4.00 6.10 X 4.10 6.50 X 4.10 6.60 X 4.10 8.00 X 6.00 8.10 X 6.10 10.00 X 6.00 10.00 X 8.00 10.10 X 8.10 12.00 X 5.00 12.00 X 6.00 12.00 X 8.00 12.10 X 8.10 12.00 X 10.00 12.10 X 10.10 GRADES: AISI-410 / 420 /430 / 304 / 316 / 201 / 204Cu FINISH: Cold drawn
Half Round Bars Most commonly used for Hardware purposes are very popular throughout the world. Technical Specification: SIZES: 12mm -25mm GRADES : AISI-201, 204Cu,304, 316 PSQ Pump Shaft Quality under the product DH produces PSQ bars in both Austenitic as well as Martenistic grades. Austenitic stainless steels are most commonly used. Austenitic stainless steel pump shafting is not magnetic; due to its high nickel and chromium composition, it is extremely resistant to corrosion. In addition, austenitic stainless steel pump shafting provides excellent mechanical properties. Heat treatment cannot be used to harden austenitic stainless steel pump shafting, although it can be hardened considerably by cold working. Grades Available in Austenitic Steel:- AISI-410 AISI-416 AISI-420 DH produces PSQ bars with superior finish and straightness tolerance by an additional process using modern techniques and state-of-art machinery and types of equipment including special finishing machines to give a smooth and mirror finish surface. Thus wear-free running of the impellers is ensured. DH also provides chamfering at 30- 45 degrees as per customer requirements. The bars thus produced undergo stringent quality and inspection test in order to ensure the exact technical requirements have adhered during the production as per O.E.M. specifications. Thereafter the bars are wrapped in HDPE sheets and then stuffed inside export-quality wooden boxes as per the specific requirements of the customer. DH also provides other types of packing like tube packing of each bar, putting 3-4 rubber/plastic "O" rings throughout each bar as per specific requirements from their customers. The details of such packing are precisely explained in our Packing segment under this website. Specification: Size Range : 10mm-70mm Diameter Tol. : h9, h8 Ovality: 1/2 the diameter tolerance Straightness: Upto 0.5mm per 1 meter Length : 2.5 meters - 6 meters Surface : Smooth / Mirror Finish The common application of PSQ Bars:- The PSQ bars are commonly used at following Industry levels:- Pneumatic and Hydraulic Cylinder Shafts Textile Machinery Shafts Piston Shafts Precision Shafting Chemical Pump Shafts
Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel
One of the top AISI 304 Round Bars Manufacturer, Suppliers, and The aerospace sector relies heavily on 304 Round Bars, which are also crucial for transportation and constructions like window and building fade frames.
RANGE 6MM TO 90MM 201/202 QUALITY EXPORT QUALITY BRIGHT BARS 304/304L QUALITY EXPORT QUALITY BRIGHT BARS 316/316L QUALITY EXPORT QUALITY BRIGHT BARS 317L QUALITY EXPORT QUALITY BRIGHT BARS
Outside Diameter Range 4mm To 200mm 304 QUALITY EXPORT QUALITY BRIGHT BARS 316 QUALITY EXPORT QUALITY BRIGHT BARS 310 QUALITY EXPORT QUALITY BRIGHT BARS 317L QUALITY EXPORT QUALITY BRIGHT BARS 904L QUALITY EXPORT QUALITY BRIGHT BARS 31803 QUALITY EXPORT QUALITY BRIGHT BARS 32205 QUALITY EXPORT QUALITY BRIGHT BARS 32750/32760 QUALITY EXPORT QUALITY BRIGHT BARS INCONEL 600/625/800/825 QUALITY EXPORT QUALITY BRIGHT BARS Hastelloy C4 Quality Export Quality Bright Bars
