Cast Iron Pipe confirming to DIN/EN877/ISO6594
Material:Cast Iron with flake graphite
Qualilty:GJL-150 according to EN1561
Coating: SML,KML,BML,TML
Size:DN40-DN300
The gray cast iron soil pipes produced by centrifugal technology which are used
in drainage sewer system and ventilation ducts system through a flexible linkage.
which have following advantages :flat straight,even pipe wall.
high strength and density,high smoothness internal and external surface,
no casting defect, easy installation, easy maintain, long using life,
environmental protecting,fireproofing and no noise.
Pipe fittings confirming to DIN/EN877/ISO6594
Material:Cast Iron with flake graphite
Qualilty:GJL-150 according to EN1561
Coating: SML,KML,BML,TML
Size:DN40-DN300
The pipe fittings produced by our company have smooth surface, high density, no white,
High strength, light weight, reasonable design in structure,
beautiful externality used on high buildings and environmental protecting,
strength corrosion-resistant coating for fittings
932 Iron Pipes Suppliers
Short on time? Let Iron Pipes sellers contact you.
Cast Iron Pipe confirming to DIN/EN877/ISO6594
Material:Cast Iron with flake graphite
Qualilty:GJL-150 according to EN1561
Coating: SML,KML,BML,TML
Size:DN40-DN300
The gray cast iron soil pipes produced by centrifugal technology which are used
in drainage sewer system and ventilation ducts system through a flexible linkage.
which have following advantages :flat straight,even pipe wall.
high strength and density,high smoothness internal and external surface,
no casting defect, easy installation, easy maintain, long using life,
environmental protecting,fireproofing and no noise.
Our grey cast iron pipe fittings are in accordance with the standards: GB/T 12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 etc. Through lost foam casting process, we produce cast iron soil pipe fittings such as elbows, tees, cross and so on.
GB/T 12772, ISO 6594, ASTM A888/CISP 130,BS EN877, KSD 4307.
We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T113295, ISO2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
The centrifugal ductile cast iron pipe is mainly used to transport water, oil and gas. The outstanding features of the nodular cast iron pipe are the following:
1: The centrifugal ductile iron pipe not only has the ductility, high strength and pressure-proof of steel but also has the corrosion resistance of grey cast iron.
2: The excellent mechanical property of the centrifugal nodular cast iron pipe (elongation>=10%, tensile strength>=420Mpa, pressure-proof >=4Mpa) accords with the requirements of high pressure-proof and resistance to deformation for the pipe used to transport water, gas and oil.
3: The ductile cast iron pipe has stable chemical properties. Plus anti-corrosion methods of zinc spraying and paint coasting, it has excellent anti-corrosion performance so that its service life is over 100 years.
4: The installation for centrifugal ductile iron pipe is convenient and quick and the construction cost is cheap.
5: High reliability. The centrifugal nodular cast iron pipe has high pressure-proof performance, good elongation as well as flexible joints. Medium leakage wont come up even the axial direction deviates 3 or 5 degree. It has better quakeproof performance and base anti-sinking ability.
We can produce centrifugal ductile iron pipe from DN80 to DN1600 in accordance with GB/T 113295, ISO 2531, EN598 and EN545 standard. The connector type includes: T type, K type, N type and S type etc. The annual output is about 50000 tons.
Suitable for all flanged piping materials above ground or in chamber.
Flanges and drillings to ISO7005-2 (BS EN1092-2:1997, DIN2501)
Use : For water , sewage and neutral liquids to max .70C
The dismantling joint enables easy installation and dismantling of isolating valves , non return valves , flow metering equipment , pumps etc. It compensates for axial displacement of the pipe during installation/dismantling .
Features:
1) Follower gland ring : Ductile Iron GGG500-7
2) Flanged Adaptor bodies : Ductil iron GGG500-7
3) F-piece pipe : Ductile iron GGG500-7
4) Bolts, Nuts and Washers Material : Carbon Steel Grade 4.8 with Zinc Coating , Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request .
5) Tie Rods : Carbon Steel Grade 4.8 with Zinc Coating, Epoxy Coating or Dacromet Coating Or Stainless Steel upon customer's request .
6) Gaskets material : For water or Gas : NBR Grade A .
For drinking water : EPDM rubber to BS2494:1990 type W .
For drinking water and sewage : SBR Grade F .
7) Body Coating : Fusion Bonded Epoxy Coating inside and outside or bitumen
8) Sizes : DN50 - DN2000
9) Pressure Grade : PN10 / 16 / 25
10) Package : Bubble plastic bags, Cartons and Wooden cases.
Suitable for all flanged piping materials above ground or in chamber.
Flanges and drillings to ISO7005-2 ( BS EN1092-2:1997,DIN2501).
1) Standards : ISO2531, ISO4422, EN545, EN598, BS4772, AWWA C110
2) Material:GGG500-7 or Ductile iron
3) Specific types:
"T" type ductile iron pipes fittings: double socket 11.25 22.5 45 90 bend DN80-2000
-all socket tee DN80-2000
-double socket tee with flanged branch DN80-2000
-flanged socket DN80-2000
Accessories of "T" type nodular cast iron pipe fittings: Gaskets according with EPDM.
"K" type ductile cast iron pipe fittings: BOLTED GLAND BEND 90 11.25 45 22.5,CLASS K12
BOLTED GLAND CONCENTRIC TAPERS, CLASS K12
FLANGED AND BOLTED GLAND SOCKET PIECES, CLASS
BOLTED GLAND COLLARS CLASS K12
BOLTED GLAND GHANGE COLLAR CLASS K12
BOLTED GLAND TEE, CLASS K14
BOLTED GLAND SOCKET SPIGOT BEND (90 45 22.5), CLASS 12
BOLTED GLAND SOCKET SPIGOT TEE WITH FLANGED BRANCH
All above "K" type ductile iron pipe fittings specification: DN100-500
Accessories of "K" type ductile cast iron pipe fittings: Gaskets according with EPDM
Bolts & Nuts in Carbon Steel grade 4.8.
Standards : ISO 2531, ISO 4422, EN 545, EN 598, BS 4772, AWWA C110
Material : GGG500-7 or Ductile iron.
Material: HT150( gray cast iron)
Making process: Centrifugal casting process
Standard: GB/T12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 and DIN 19522
Specification: Inside diameter from d 8mm to 250mm(1.5¡±--10¡±) with 3m length
Function characteristics: The cast iron soil pipe or cast iron sewage pipe is produced by centrifugal casting process. The centrifugal cast iron soil pipe and cast iron pipe fittings are flexibly connected through stainless steel couplings with high quality rubber sealing gasket inside it.
Standard: GB/T 12772, ISO 6594, ASTM A888/CISP 130, BS EN877, KSD 4307 and DIN 19522.
Specification: inside diameter from d 8mm to 250mm(1.5¡±--10¡±) with 3m length.
1), Product Information
The ductile iron pipe manufactured by vortex are mainly used for transferring the drinkable water,waste water and for irrigation.
The diameter is from DN80-DN2000,K8/K9/K10/K12, Tyton socket and spigot,the standard length is 6m.
2),Standard
conform to ISO2531/EN545/EN598/4179/8179
3), Material
Ductile Iron GGG500-7&400-12 or ASTM-A-536grade 80-55-06
4) coating
Metallic zinc spray with Bituminous Coating (Outside) Cement mortar lining (Inside). Epoxy coating available upon request.
5) joint method available
Push-on
6), Process
centrifugal casting
7), Inscription Style
As per customers' requests
Standard Inscription
8), Packing
standard export bundle
in bulk
As per customers' requirements
9), Inspection
Foundry in-house
Third Party inspection available upon request .
More information is available upon receipt of your enquiry.
